IPAC'26 - the 17th International Particle Accelerator Conference

17 May 2026, 09:00 → 22 May 2026, 18:00 Europe/Zurich

C.I.D

Hanna Franberg Delahaye (Grand Accélérateur Nat. d'Ions Lourds), Peter McIntosh (Science and Technology Facilities Council), Rogelio Tomas (European Organization for Nuclear Research)

Sunday 17 May

Registration on site

Student poster session

Welcome

Monday 18 May

MC0 : opening session: Welcome Address

MC0 : opening session

1 GANIL - SPIRAL2 facility : first years of operation and new developments.

The Ganil- SPIRAL2 facility has been operating since 2020, producing various ion beams for the experimental facility Neutron For Science. The variety of beams to be accelerated by the linac, from protons up to uranium beams, with variable energies from 0,75 MeV/A up 33 MeV for protons and a very large range in intensities (from nA up to mA) makes the operation of the facility very specific, either in terms of required diagnostics and tuning softwares. The first years of operation in these conditions will be reviewed, and the new developments currently underway, necessary for an ever more efficient operation, will be presented.

Speaker: Robin Ferdinand (Commissariat à l'Energie Atomique)

2 Updating the strategy: CERN's future flagship programme

The Update for the European Strategy for Particle Physics will take place over 2025, with various community inputs and an open symposium. Many are eagerly awaiting the outcome and what it means for CERN and large collider projects worldwide. If the response from the ESPP is clear and decisive, then this talk will be an opportunity to elaborate CERN's plans with the international accelerator community. If the ESPP does not offer a clear direction, then this would be an opportunity to hear from CERN's new Director General about CERN's plan going forward.

Speaker: Mark Thomson (University of Cambridge)

10:30 Coffee break

MC0 : opening session

3 Synchrotron light facility updates: the bright future of synchrotron science

Synchrotron light sources are undergoing a major transformation, driven by the need for higher brilliance, greater efficiency, and more advanced experimental capabilities. The transition to 4th generation synchrotrons is enabling groundbreaking research in imaging, spectroscopy, and materials science, with improvements in accelerator design, beam stability, and data handling. Key advancements include multi-bend achromat lattices for reduced emittance, energy-efficient permanent magnet systems, and increasingly automated, AI-enhanced workflows for data acquisition and analysis. Facilities worldwide are also integrating new beamline technologies to support high-throughput experiments and multimodal studies. In parallel, efforts to improve sustainability and optimize user access models are shaping the future of synchrotron research. These developments are not only expanding scientific possibilities but also reinforcing international collaboration, ensuring synchrotron facilities remain at the forefront of innovation.

Speaker: Laurent Chapon (Advanced Photon Source)

4 First Acceleration of Positive Muons: From Initial Demonstration to High-Energy Development

The realization of low-emittance muon beams through cooling and acceleration is a pivotal technology with significant potential to advance various scientific disciplines, ranging from fundamental particle physics to applied material science. Recently, we successfully demonstrated, for the first time, the acceleration of positive muons generated by resonant multi-photon ionization of muonium using a radio-frequency quadrupole linac (RFQ), accelerating them from thermal energy to 100 keV. To further advance these studies, a dedicated muon linac, composed of four types of RF cavities, has been developed to accelerate muons to 212 MeV, approaching the speed of light. The beamline and accelerator are being constructed from the upstream, and the acceleration up to the second RF accelerator is already planned, with further acceleration up to a few MeV scheduled from 2026 fiscal years. This presentation shows the results of the first acceleration of positive muons and ongoing developments aimed at achieving higher energies.

Speaker: Masashi Otani (High Energy Accelerator Research Organization, Japan Proton Accelerator Research Complex)

5 Commissioning Progress of the ESS Linear Accelerator

The European Spallation Source (ESS) is in the final stages of commissioning its linear accelerator (linac), which will deliver a high-power proton beam for neutron production. The commissioning process involves progressive testing of subsystems, including the ion source, radio-frequency quadrupole (RFQ), and superconducting cavities, to ensure stable and reliable beam operation. Key challenges include beam dynamics optimization, machine protection, and high-power RF system integration. Within this presentation an overview of the commissioning status, key milestones achieved, and expectations for the first beam on target, marking a significant step toward full facility operation could be given.

Speaker: Natalia Milas (European Spallation Source)

12:30 Lunch break

MC7: Accelerator Technology

6 Additively-manufactured monocrystalline YBCO superconductor

Single-crystal microstructures enable high-performance YBa2Cu3O7-x superconductors which are however limited to simple shapes due to their brittleness. Additive manufacturing can fabricate YBa2Cu3O7-x superconductor with complex shapes, albeit with a polycrystalline microstructure. Here, we demonstrate a route to grow single-crystals from 3D-ink-printed, polycrystalline, sintered superconducting YBCO, manufacturing objects with complex architectures displaying both high critical current density and high critical temperature . An ink containing precursor powders (Y2O3, BaCO3, and CuO) is 3D-extruded into complex geometries and then reaction-sintered to obtain polycrystalline Y123 + Y211. A seed is then utilized to transform these 3D-printed parts from poly to monocrystal via the melt growth method. The geometric details of 3D-printed parts survive the process without slumping, sagging or collapse, despite the long-term presence of liquid above the peritectic temperature. This additive approach enables the facile fabrication of superconducting devices with complex shapes and architectures, such as advanced undulator magnets to generate synchrotron radiation and microwave cavities for dark-matter axion search. This work highlights the potential of additive manufacturing for producing monocrystalline cuprate superconductors and opens the door to additive manufacturing of other monocrystalline functional ceramic or semiconductor materials.

Speaker: Cristian Boffo (Fermi National Accelerator Laboratory)

7 HTS Technology development for energy efficient magnets in PSI Large Research Facilities

Over the past decade, the Magnet Section at the Paul Scherrer Institute (PSI) has developed extensive expertise in superconducting magnet design, construction, and testing, forming the foundation for SMILE (Superconducting Magnets to Improve Large Research Facilities Efficiency) - a proposed R&D initiative that brings together PSI experts and international partners. SMILE’s primary goal is to enhance magnet performance while significantly reducing energy consumption and CO₂ emissions across PSI’s large research facilities. This presentation outlines the future roadmap for advancing High Temperature Superconductor (HTS) technology at PSI’s High Intensity Proton Accelerator (HIPA) complex. A key focus is the development of cryocooler-based HTS magnets for both DC and ramping applications, addressing the unique challenges of operating conduction-cooled HTS tapes in dynamic field environments. Additionally, a critical research area focuses on understanding and mitigating radiation-induced degradation in HTS materials, essential for magnets operating near high-intensity targets. This combined focus on performance enhancement, energy efficiency, and radiation resilience aims not only to reduce PSI’s power consumption and environmental footprint, but with meaningful contributions impacting the research related to the industrial use of the HTS magnets.

Speaker: Stephane Sanfilippo (Paul Scherrer Institute)

MC1 : Colliders and related accelerators (Invited)

8 Project status and R&D efforts for Super Tau-Charm Facility

The Super Tau-Charm Facility (STCF) was proposed as a third-generation circular electron-positron collider in the energy range of 2-7 GeV (CoM) and with a luminosity greater than 5*10^34 cm^-2s^-1 @4 GeV, aiming to explore charm physics and tau physics in the next decades. This presentation will introduce the facility design and R&D efforts for STCF, including the design goal, accelerator and detector schemes, and key technological R&D efforts, with focus on the accelerator. Under the financial support of the key technology R&D project by the local provincial government and other national funding agencies, the STCF accelerator team is working on the conceptual design of the accelerator, which will be followed by the technical design, while the detector team is working on the technical design. The accelerator consists of a full-energy injector consisting of multi-section linacs and a positron accumulator ring and a double-ring collider with the crab-waist collision scheme. Key physics and technological challenges will be addressed. Ongoing R&D efforts and progresses will be summarized. The project planning will also be given.

Speaker: Jingyu Tang (University of Science and Technology of China)

9 Prospects for linear colliders

In this talk the status of CLIC will be reviewd on design, technology readyness, human resourcece and timeline, etc.

Speaker: Steinar Stapnes (European Organization for Nuclear Research)

10 Contributed 1

11 Contributed 2

12 Contributed 3

13 Contributed 4

14 Contributed 5

15 Contributed 6

Poster session

18:00 Chair's reception

Tuesday 19 May

MC2 : Photon Sources and Electron Accelerators

16 First Lasing of a Cavity Based X-ray FELser facility

We present the first commissioning results of the XFEL laser oscillator (XFELO) demonstrator project, a joint European XFEL and DESY effort. XFELOs promise unprecedented coherence, stability and Brilliance in the hard X-ray regime. Their successful realization would mean a leap forward for the
field of FELs, opening new experimental opportunities and facilitating the notoriously demanding experiments at FEL facilities due to the increase in reproducibility. The demonstrator setup constructed at the European XFEL facility aims to realize the first ever true multi-bunch XFELO by achieving seeding with a bandwidth of 0.02eV at a fixed X-ray photon energy of 7 keV. Our demonstrator project shall showcase the capability to produce XFEL photon pulses with mJ-level pulse energies and high pulse-to-pulse stability. The scope of the project with its inherent challenges as well as its current status shall be presented in this contribution.

Speaker: Patrick Rauer (Deutsches Elektronen-Synchrotron DESY)

MC8 : Applications of Accelerators, Engagement with Industry, Technology Transfer and Outreach

17 Particle Accelerator-driven Muon Spectroscopy: An invaluable tool to understand our material world.

Muons are generated at several accelerator-based facilities around the world and can be implanted into a wide range of materials, acting as a local probe of the surrounding atomic environment. By measuring the muon’s precession and relaxation can provide an understanding of the material of interest and, from this, unique information is obtained on the static and dynamic properties. This has enabled muon spectroscopy to develop into a powerful tool to investigate materials, such as fundamental magnetism, superconductivity and functional materials, energy storage, ionic diffusion in potential batteries, the dynamics of soft matter, free radical chemistry, reaction kinetics, semiconductors, advanced manufacturing, cultural heritage, and even the effects of muons on electronics*. This talk will introduce the techniques, give an overview of the global facilities, describe the important characteristics of the particle accelerator, and highlight some recent scientific highlights.

Speaker: Adrian Hillier (Science and Technology Facilities Council)

18 Contributed 7

19 Contributed 8

20 Contributed 10

21 Contributed 9

22 Contributed 11

23 Contributed 12

10:30 Coffee break

MC3 : Alternative Particle Sources and Acceleration Techniques

24 High quality electron beams with tunable energy produced by laser-plasma acceleration

Laser wakefield acceleration (LWFA) of electrons occurs when an intense short laser pulse focused in an underdense plasma drives in its wake a plasma wave with an amplitude large enough to trap and accelerate electrons. Relativistic electron bunches are easily obtained through this mechanism and have given rise to a large number of studies and publications. Despite these efforts, the achievement of a high quality reliable electron source, ready for use in applications, still needs some developments.
Electron beams with high quality, and tunable electron energy, have been achieved by the proposing team using the DRACO facility (HZDR Dresden), showing that the injection and acceleration processes can be controlled consistently in a gas cell. Dark current free, relativistic electron bunches with energy peaked at tunable values between 60 MeV, and 200 MeV, 40 pC charge in the peak and sub-mrad rms divergence, reaching up to 14pC/MeV/mrad, have been achieved experimentally and reproduced in PIC simulations using measured input parameters. Ongoing work is aimed at increasing the charge in the peak beyond 100pC through new gas cell development.

Speaker: Brigitte Cros (Université Paris-Saclay)

25 First direct observation of a wakefield generated with structured light

Very important results with the first observation of structured light laser driven plasma wave with femtosecond relativistic electron microscope. A path toward dephasing free accelerator. Paper under review. Aaron Liberman is one of my best PhD student and an outstanding speaker. Paper with referees.

Aaron will be the speaker: his email address is:
aaronrafael.liberman@weizmann.ac.il

I did not found a way to add it in the authors box !

Speaker: Aaron Liberman (Weizmann Institute of Science)

MC5 : Beam Dynamics and Electromagnetic Fields

26 Manipulating and Diagnosing Electron Beam with Cross-Plane Coupling in the Transverse Phase Space

Beams with significant correlations between different phase spaces are increasingly important for advanced accelerator applications. A prime example is magnetized beams, where cross-plane correlations between the two transverse phase spaces dominate the beam dynamics. Precisely controlling these cross-plane couplings—either by introducing or eliminating them in beams with high transverse emittance ratios—is particularly relevant to hadron cooling using cold electron beams. In this paper, we investigate the generation of magnetized beams and their transformation into flat beams through the removal of correlations. Conversely, we demonstrate the novel generation of magnetized beams from initially flat-beam distributions. These sophisticated manipulations rely on precise phase space diagnostics, for which we apply an AI/ML-based phase space reconstruction algorithm capable of accurately determining all cross-plane correlations within the 4D transverse phase space. We present a comprehensive analysis of the beam dynamics governing these transformations, supported by experimental demonstrations of both the beam manipulation techniques and the 4D phase-space reconstruction methodology.

Speaker: Seongyeol Kim (Pohang University of Science and Technology)

MC4: Hadron Accelerators

27 Status and Comparison of World-wide In-flight Fragment Separators

Generation of rare isotope beams by means of in-flight separation of nuclear fragments and fission products requires complex optical structures usually comprising multiple separator stages. Large apertur magnets providing maximum acceptance, radiation hard and superconducting are used to separate the reference isotope from the bulk of the primary and secondary heayv ion beam. The pre-separator stages are designed to dump a majority of the secondary beam in a controlled way and are therefore often a challenge for radioprotection, shielding and beam catchers. The complex optics of fragment separators makes use of energy degraders, intermediate focal- and image planes to minimie contamination of the desired isotopes. A comparison of optical designs and magnet technologies will be presented.

Speaker: Haik Simon (GSI Helmholtz Centre for Heavy Ion Research)

28 Accelerator Complex Evolution at Fermilab

The largest hadron accelerator facility in the US is undergoing radical changes and the undertaking of new HEP-driven neutrino research. This talk will discuss the wide-ranging projects and impacts to the accelerator community taking place at FNAL.

Speaker: Mary Convery (Fermi National Accelerator Laboratory)

MC6 : Beam Instrumentation, Controls, Feedback & Operation

29 ML-driven Automated Tuning of SACLA XFEL

Speaker: Eito Iwai (Japan Synchrotron Radiation Research Institute)

12:30 Lunch break

MC2 : Photon Sources and Electron Accelerators

30 Attosecond FEL Physics

Following the first demonstration of isolated attosecond FEL pulses in 2018 and the Nobel prize in (tabletop) attosecond science in 2023, demand for attosecond x-ray pulses has increased exponentially.

This talk would review recent advances in attosecond pulse generation, including: attosecond lasing at LCLS-II; the first demonstration of attosecond super-radiance; and a measurement of FEL group velocity in the first attosecond pump / attosecond probe experiment at a free electron laser. These advances rely on the novel use of collective dynamics to shape the electron beam.

This talk would also provide an outlook for upcoming opportunities in attosecond science using linear accelerators, including:
HXR attosecond pulses and attosecond beams from plasma wakefield based bunch compression.

Speaker: Agostino Marinelli (SLAC National Accelerator Laboratory)

31 Report on the performances of the ThomX compact Compton source demonstrator

ThomX is a demonstrator of Compact Compton Source. In 2024 they reported a flux of 10^10 x-rays/s and significant improvement have been made to the machine after that improvement. The first user runs have taken place at the beginning of 2025,so there will be interesting results to report in 2026.

[1] https://journals.aps.org/prab/abstract/10.1103/PhysRevAccelBeams.28.023401

Speaker: Iryna Chaikovska (Laboratoire de Physique des 2 Infinis Irène Joliot-Curie)

MC7: Accelerator Technology

32 Innovate for Sustainable Accelerator Systems (iSAS)

Particle accelerators have become essential instruments for fundamental research and also to improve our health, high-tech abilities or safety. Accelerating particles to high energies require a large amount of energy and energy sustainability is an unavoidable challenge for future accelerators. Among several solutions developed to minimize energy consumption, the project Innovate for Sustainable Accelerator Systems (iSAS) focuses on energy-efficient SRF R&D. It aims to develop core SRF technologies with the largest leverage for energy savings. This european-funded project (HORIZON-INFRA-2023-TECH-01-01) aims to develop, prototype and validate SRF technologies so that accelerators can operate with the same or improved performance while using significantly less energy.
iSAS is devoted to three main technology areas, aiming to save energy
• from the RF power with fast reactive tuners, smart LLRF system, optimized fundamental and HOM couplers,
• from the cryogenics, with Nb3Sn on Cu cavity operating at 4.5 K,
• from the beam, with energy-recovery linacs.
The project envisages three activities to introduce these technologies into the design of a sustainable LINAC cryomodule, into existing research facilities and into industrial solutions.

Speaker: Maud Baylac (Laboratoire de Physique Subatomique et de Cosmologie)

33 The tristron, a new paradigm in high-efficiency RF power generation

The tristron was already proposed many years ago but was never developed to a stage, where it could be mass produced. Based on IOTs, the tristron promises to achieve RF efficiencies above 90% for a wide frequency and power range. Building on the development of high-efficiency klystrons, CERN is proposing this new device as the power source of choice for future colliders like the FCC. The talk will focus on the conceptual design of the tristron and outline the development that is starting together with industry.

Speaker: Igor syratchev (European Organization for Nuclear Research)

34 Contributed 13

35 Contributed 14

36 Contributed 15

37 Contributed 16

38 Contributed 17

39 Contributed 18

Poster session

18:00 Main Reception

Wednesday 20 May

MC8 : Applications of Accelerators, Engagement with Industry, Technology Transfer and Outreach

40 EUV for lithography production using accelerators

This talk gives an overview of the ongoing developments to produce EUV for lithography

Speaker: Daniel Ratner (SLAC National Accelerator Laboratory)

MC1 : Colliders and related accelerators (Invited)

41 A quarter century of RHIC – performance far beyond design

The BNL Relativistic Ion Collider (RHIC) started operation in 2000 with a program of high-energy ion collisions. A few years later a unique program with polarized proton collisions was added, and the following years the program expanded further and further with the Au-Au luminosity increasing to 44x of the Au-Au design using a with novel bunched beam stochastic cooling system, proton polarization to 56% at the highest energy, 12 different species combinations including 4 asymmetric ones, an extension of the energy range below the nominal injection energy for which the first bunched beam electron cooler was operated, and operational flexibility that allowed for more than 10 different modes in a single year.
We examine the path from the beginning to the end of the physics program in 2025 and outline the technical and other components and strategies to sustain a long and varied physics program. Parts of RHIC are now prepared for use in the Electron-Ion Collider.

Speaker: Michiko Minty (Brookhaven National Laboratory)

42 Contributed 19

43 Contributed 20

44 Contributed 21

45 Contributed 22

46 Contributed 23

47 Contributed 24

10:30 Coffee break

MC3 : Alternative Particle Sources and Acceleration Techniques

48 Controlled injection and acceleration of 10 GeV-class electron beams in a laser wakefield accelerator

We measure the high-intensity laser propagation throughout meter-scale, channel-guided laser-plasma accelerators by adjusting the length of the plasma channel on a shot-by-shot basis, showing high-quality guiding of 500 TW laser pulses over 30 cm in a hydrogen plasma of density 𝑛≈10^17  cm−3. We observed transverse energy transport of higher-order modes in the first ≈12  cm of the plasma channel, followed by quasimatched propagation, and the gradual, dark-current-free depletion of laser energy to the wake. We quantify the laser-to-wake transfer efficiency limitations of currently available petawatt-class lasers and demonstrate via simulation how control over the laser mode can significantly improve beam parameters. Using 21.3 J of laser energy, and triggering localized electron injection, we observed electron bunches with single, quasimonoenergetic peaks up to 9.2 GeV with charge extending beyond 10 GeV.
Reference:
Picksley et al., Phys. Rev. Lett. 133, 255001 (2024)

Speaker: Alex Picksley (Lawrence Berkeley National Laboratory)

MC5 : Beam Dynamics and Electromagnetic Fields

49 Overview of crab cavities for light sources and particle colliders

The speaker will illustrate the motivations which, in the last decade, brought to new consideration of RF transverse deflecting cavities, a.k.a. crab cavities, for application to storage ring light sources (time-resolved synchrotron radiation experiments) as well as to circular and linear colliders (maximizing luminosity). He will report on the physical constraints of the aforementioned accelerators to the implementation of crab cavities, the technical challenges and the advancement in the production of superconducting devices.

Speaker: Rama Calaga (European Organization for Nuclear Research)

50 Contributed 25

51 Contributed 26

52 Contributed 27

53 Contributed 28

54 Contributed 29

55 Contributed 30

12:30 Lunch break

Engagement with Industry Session

MC2 : Photon Sources and Electron Accelerators

56 Commissioning and current status of High Energy Photon Source (HEPS)

The first 4th generation light source in China, HEPS, has been constructed and commissioned. The new light source is expected to produce the emittance of less than 100 pm.rad that can provide hard X-rays with the brilliance higher than 10^22 photons/sec/mm^2/mrad^2/0.1%B.W. In order to stably operate this ultra-low emittance ring, HEPS accommodated the advanced swap-out beam injection scheme, in which the kicked-out beams return to the booster synchrotron for reuse. This talk will present the current status of accelerator and beamline commissioning and future plan.

Speaker: Yuhui Dong (Chinese Academy of Sciences)

MC5 : Beam Dynamics and Electromagnetic Fields

57 Realization of High-Intensity Beams with Smaller Emittance Without a Transverse Feedback System

The RCS at J-PARC is a kicker-impedance-dominant machine, which exceeds the impedance budget from a classical viewpoint. However, we have achieved a 1-MW beam without transverse feedback by fully utilizing the indirect space charge effect to suppress beam instabilities. Although the indirect space charge effect is beneficial, beam instability can still occur in a high-intensity beam with smaller transverse emittance. To address this, we installed diode stacks and resistors at the ends of the four kicker power cables and have successfully conducted routine operations. This approach opens the door to achieving high-quality, higher-intensity beams, including a 2-MW beam, as no transverse feedback is required.

Speaker: Yoshihiro Shobuda (Japan Proton Accelerator Research Complex, Japan Atomic Energy Agency)

58 Contributed 31

59 Contributed 32

60 Contributed 33

Poster session

Equal Opportunities

Thursday 21 May

MC2 : Photon Sources and Electron Accelerators

61 MAX 4U, an upgrade of the MAX IV 3 GeV ring.

The MAX IV 3 GeV storage ring in Lund, Sweden, was the first implementation of a multibend achromat (MBA) lattice fourth-generation light source. Since it started delivery of light in 2016, three succeeding MBA-based rings and variants have come on-line: ESRF-EBS, Sirius and APS-U. Several others are being planned, designed, built or commissioned. All of these capitalize on the MBA concept and expand it to push the brightness and coherence performance even further. In order to continue to offer the Swedish and international scientific communities’ competitive tools beyond the end of this decade, MAX IV Laboratory launched in 2024 the conceptual design of MAX 4U, an upgrade of its 3 GeV storage ring aiming at an emittance below 100 pm.rad. This performance boost is to be achieved through a minimum-interference upgrade in which localized interventions in selected subsystems and components are carefully chosen to provide the maximum performance increase with minimum cost and, equally important, minimum dark time for the MAX IV user community. In 2025, the conceptual design report (CDR) is published, and the focus in 2026 is to elaborate on the solutions identified for this upgrade through the Technical Design Report (TDR), to be published in 2027. This contribution describes the latest developments in accelerator physics and engineering aspects of the MAX 4U design.

Speaker: Eshraq Al-Dmour (MAX IV Laboratory)

MC3 : Alternative Particle Sources and Acceleration Techniques

62 First 150 MeV Proton Beam from Plasma Accelerators

Proton beams produced from plasma accelerators have recently reached 150 MeV beam energy. This is considered a crucuial milestone on usability of this technology for cancer treatment. The technical results at HZDR are presented, further advances are discussed and an outlook to applications is presented.

Speaker: Ulrich Schramm (Helmholtz-Zentrum Dresden-Rossendorf)

63 Contributed 34

64 Contributed 35

65 Contributed 36

66 Contributed 36

67 Contributed 38

68 Contributed 39

10:30 Coffee break

MC4: Hadron Accelerators

69 Progress and status of high intensity heavy ion accelerator facility (HIAF) in China

HIAF is one of the next generation heavy ion accelerators under construction in China. It is composed of a superconducting ion linear accelerator, a high-energy synchrotron booster, a high-energy radioactive isotope beam line, an experimental storage ring and multiple experimental setups. Characterized by unprecedented intense ion beams from hydrogen through uranium, HIAF can produce a large variety of exotic nuclear matters not normally found on the earth and will bring researchers to the forefront of promoting the most vigorous and fascinating fields in nuclear physics. During the construction of HIAF, extensive R&D efforts have achieved a major breakthrough in fast-cycle acceleration through innovative technological solutions. Currently, most components have completed production and fabrication. The civil engineering and infrastructure have been completed. The facility has entered the installation phase. The accelerator equipment installation is 95% complete. The integrated commissioning of the power supply and magnet systems is in progress. The vacuum of BRing and SRing has reached 10^-12mbar. The first beam has been delivered by the combination of SECR and RFQ in August 2024. The Day One experiment is expected to be made by the end of 2025. The details of the HIAF status and progress will be given in this report.

Speaker: Jiancheng Yang (Institute of Modern Physics, Chinese Academy of Sciences)

MC6 : Beam Instrumentation, Controls, Feedback & Operation

70 Overview of the Beam Position Monitors Development for the Next Generation Light Sources

The development of Beam Position Monitors (BPMs) is crucial for the next generation of synchrotron light sources, where increasing demands for miniaturization and enhanced performance drive innovation. As beam pipes become smaller and beam spectra broaden, BPM button designs must evolve to ensure high-resolution measurements essential for machine commissioning and feedback systems. This paper explores the latest advancements in BPM technology, addressing challenges related to signal integrity, mechanical constraints, and system integration. Novel design approaches and optimization strategies are discussed to meet the stringent requirements of modern synchrotron facilities like PETRAIV, ALBAII, SOLEILII, ALS-U, Korea-4GSR.

Speaker: Laura Torino (ALBA Synchrotron (Spain))

71 Contributed 40

72 Contributed 41

73 Contributed 42

74 Contributed 43

75 Contributed 44

76 Contributed 45

12:30 Lunch break

Award Session

Entertainment Session

Poster session

18:00 Conference Banquet

Friday 22 May

MC5 : Beam Dynamics and Electromagnetic Fields

77 Beam Dynamics in the SNS Linac and Beam Test Facility

The speaker has experience in the modeling and measurement of high-intensity beams, including the SNS linac and BTF. Dynamics of halo formation and losses in the linac could be discussed. In addition to the unique status of SNS as the premier US intensity-frontier facility, the BTF has unique high dynamic range phase space diagnostics that enable detailed benchmarking of phase space details against numerical modeling (in pyORBIT), making it an ideal facility for code validation of 4D/5D phase space distributions against precision measurements. (The proposed speaker gave a talk on benchmarking in the BTF at ICAP'24.)

Speaker: Kiersten Ruisard (Oak Ridge National Laboratory)

MC6 : Beam Instrumentation, Controls, Feedback & Operation

78 From femtosecond to attosecond RF field control

In the past two decades, RF controls have improved by two orders in
magnitude achieving meanwhile sub-10 fs phase stabilities and 10e-4
amplitude precision. Analog-to-digital-converters (ADCs) are the main
limitation for further increase in detector resolution. Alternative
architectures are therefore needed to overcome this limitation. The
presented work covers a novel application of the suppressed-carrier
detector, which extends conventional heterodyne receivers and improves
the residual time jitter of the regulated RF-field in the cavity far
below 1 fs. A practical implementation of the proposed principle is
presented. The setup was used to drive a superconducting RF cavity at
1.3 GHz frequency at a Cryo Module Test Bench (CMTB) at a gradient of
8MV/m. The measured out-of-loop residual time jitter of the RF field
was 189 as (10Hz to 1MHz). The limiting factors of the setup have been
identified by feeding the measurements to a system model. In conclusion,
a general discussion about future steps is presented.

Speaker: Frank Ludwig (Deutsches Elektronen-Synchrotron DESY)

79 Contributed 46

80 Contributed 47

81 Contributed 48

82 Contributed 49

83 Contributed 50

84 Contributed 51

10:30 Coffee break

MC0 : closing session

85 Review of inverse Compton scattering sources and research paths towards fundamental physics studies

Inverse Compton Scattering sources are becoming a mature technology world-wide, enabling several applications in many fields, from medical imaging to cultural heritage, to palaeontology, material studies and bio-physics. Very recently ICS has been proposed also for fundamental studies in the Unruh sector via the Full Inverse Compton Scattering
process, leading to maximal acceleration (10^30 m/s2) and the observation of MeV Unruh photons by the accelerated electron. After a review of present ICS, in operation or close to commissioning, we will discuss the anticipated and expected performances in the FICS modality, that enables also a very relevant application in the generation of high
energy photons, i.e. with same energy as the emitting electrons. Opening a strategic way towards high energy photon sources based on GeV and multi-GeV accelerators. Practical examples will be presented connected to plasma accelerators, high energy storage rings, Linacs driving FELs.

Speaker: Vittoria Petrillo (University of Milano-Bicocca)

86 Machine learning for design and control of particle accelerators: A look backward and forward

Particle accelerators are extremely complex machines that are challenging to simulate, design, and control. Over the past decade, artificial intelligence (AI) and machine learning (ML) techniques have made dramatic advancements across various scientific and industrial domains, and rapid improvements have been made in the availability and power of computing resources. These developments have begun to revolutionize the way particle accelerators are designed and controlled, and AI/ML techniques are beginning to be incorporated into regular operations for accelerators. This article provides a high-level overview of the history of AI/ML in accelerators and highlights current developments along with contrasting discussion about traditional methods for accelerator design and control. Areas of current technological challenges in developing reliable AI/ML methods are also discussed along with future research directions.

Speaker: Auralee Edelen (SLAC National Accelerator Laboratory)

87 The European Research Roadmap on Concepts and Technologies for Accelerators

The European accelerator R&D Roadmap for the European Strategy for Particle Physics Update (ESPPU) outlines the path towards future large-scale particle physics facilities, involving five R&D panels. Two of them cover technologies: a program for High Field Magnet (HFM) developments, and one on RF systems including RF sources and variants of s.c. and n.c. structures. The other three programs are covering advanced concepts: plasma wakefield acceleration, muon colliders and energy recovery linacs. These concepts have potential advantages over the classical collider concepts, but they are associated with a need for significant R&D as well as with increased complexity. Launched in 2022 the first phase of the roadmap will conclude in 2026. This presentation will motivate the different research topics, describe the progress made in implementing these, the successes achieved and the priority activities proposed, which will form the basis of the future R&D programme.

Speaker: Mike Seidel (Paul Scherrer Institute)

Closing Remarks

13:00 Lunch break

Laboratory Tour