-
16:40
Research on the stability of BPM independent support system
-
Anxin Wang
()
-
16:40
ROCK-IT: automated sample handling for operando catalysis at synchrotron beamlines
-
Shrouk Ehab
()
-
16:40
Determination of a reliable metrology method to characterize a sphere of confusion in the hundred of nanometer range
-
Aymeric Cunrath
()
-
16:40
Characterization and damping control of mechanical connections to improve performance of horn stripline
-
Zunping Liu
()
-
16:40
Progress and development of the offset mirror system for SHINE
-
Zuyang Ren
()
-
16:40
Vacuum system design and prototyping for the ALBA II upgrade
-
Ricardo Parise
()
-
16:40
NSLS-II magnetron coating system and upgrade
-
Paul Palecek
()
-
16:40
Becoming a synchrotron designer; experiences, challenges, and teachings.
-
Owen Harding
()
-
16:40
Application of AI intelligent control in utility systems
-
Zong-Da Tsai
()
-
16:40
Heat load study of insertion devices for the Iranian Light Source Facility
-
Hossein Karimi
()
-
16:40
Activation mechanism of surface partially nitrided high-purity titanium deposited film as a nonevaporable getter (NEG) studied by soft X-ray photoelectron spectroscopy (XPS) and angle-resolved hard X-ray photoelectron spectroscopy (HAXPES)
-
Kazuhiko Mase
(, )
-
16:40
Advanced figure control scheme for piezoelectric deformable mirror
-
Baoning Sun
()
-
16:40
Strategic maintenance transformation: integrating processes, tools, and asset intelligence
-
Andreas Lassesson
()
Gurhan Yana
()
Johan Thånell
()
-
16:40
Verification of SPring-8-II vacuum system prototype chamber
-
Kazuhiro Tamura
(, )
-
16:40
Experimental modal analysis, model correlation, and tuning for synchrotron storage rings applications
-
Ryan Johnson
()
-
16:40
A vibration control method for linear accelerator
-
Zhidi Lei
()
-
16:40
Experimental characterization of rail‑to‑carriage dynamic stiffness in linear guides
-
Gabor Felcsuti
()
-
16:40
FE-Analyses as the key to successful high-temperature brazing of complex components
-
Martin Lemke
()
-
16:40
Environmental vibration characterization and spectral analysis of ground motion sources at the SHINE facility
-
Fang Liu
()
-
16:40
Stability evaluation of a double crystal monochromator using an optical linear encoder
-
Masato Okui
(, )
-
16:40
Vacuum system design for the booster of Iranian Light Source Facility
-
Hossein Karimi
()
-
16:40
Commissioning of the APS-Upgrade storage ring vacuum system
-
Jason Carter
()
-
16:40
Vibration stability of a liquid nitrogen cooled double-crystal monochromator at HALF
-
Zhanglang Xu
(, )
-
16:40
Extended travel range and parallel-decoupled compliant positioning mechanism for medium energy resolution monochromator at HEPS
-
Lu Zhang
(, )
-
16:40
The first particle-free beam stop for the ESS superconducting linac
-
Artur Gevorgyan
()
-
16:40
Minimization of the heat-induced deformation in the switching mirror for the Elettra 2.0 nanoESCA/nanospectroscopy beamline
-
Giulio Scrimali
()
-
16:40
The new Nanomotion laboratory at ALBA
-
Juan Luis Frieiro
()
-
16:40
In-situ characterization thermal contact variations between InGa and anti-corrosion layer for beamline thermal management
-
Jie Chen
(, )
-
16:40
Final design stage completed: SX-700 successor ready for production
-
Frank Eggenstein
()
-
16:40
ConFlat® vacuum flange application and analysis in various non-circular flange geometries
-
Michael Seegitz
()
-
16:40
Parallel flexure-based RADSI instrument for curved X-ray mirror metrology
-
Lukas Lienhard
()
-
16:40
Vacuum chamber fabrication for various light sources around the world
-
Greg Wiemerslage
()
-
16:40
Beam-induced heating on the sector gate valve in the SPring-8-II storage ring
-
Hiroshi Ota
()
-
16:40
Thermal analysis and design optimization of a DCM for Korea-4GSR based on PLS-II benchmarking
-
Jinjoo Ko
()
-
16:40
FEA simulations for the reuse of front-end components for PETRA IV
-
Jörn Seltmann
()
-
16:40
Experimental evaluation of vibrational sensitivity in the Veritas spectrometer arm
-
Gabor Felcsuti
()
-
16:40
In-situ vibration measurements for evaluating impact of low conductivity water induced vibrations on Advanced Light Source upgrade (ALS-U) accumulator ring magnets and electron beam positioning monitors
-
Ryan Johnson
()
-
16:40
Corrosion-suppressed thermal interfaces with indium-gallium alloy for high-energy synchrotron beamline cooling
-
Dezhi Diao
()
-
16:40
Residual gas analysis in oxygen-free Pd/Ti deposited UHV chamber
-
Takashi Kikuchi
()
-
16:40
An ultra-stable, 3-axis goniometer for precise angular positioning for optical metrology of X-ray mirrors
-
Simon Alcock
()
-
16:40
Mechanical design of a flexible bunch compressor for SHINE linac
-
Fei Gao
()
-
16:40
Pumping station for UCV and UHV Components in the European XFEL cleanroom
-
Joshua Ohnesorge
()
-
16:40
High-stability double multilayer monochromator with gravity-driven water cooling for the SDB beamline at HEPS
-
Hao LIANG
(, )
-
16:40
Vibration stability measurement and simulation for the Future Circular Collider studies
-
Audrey Piccini
()
Michael GUINCHARD
()
-
16:40
High heat load annealed pyrolytic graphite filter for the material science beamline at SESAME
-
Mohammad AL-Najdawi
()
-
16:40
Numerical simulation and thermal optimization of a catalysis chamber for the MIRAS beamline at the ALBA synchrotron
-
Barbara de Abreu Francisco
()
-
16:40
Simulation study on the motion process of copper foil tensioning device in vacuum undulator
-
Hongcui Wang
()
-
16:40
Can stepper motors replace the piezos in a high-resolution monochromator?
-
Frank-Uwe Dill
()
-
16:40
Designing a 3-axis delta robot capable of sub-nanometre stability for a synchrotron flagship beamline
-
Scott Beamish
()
-
16:40
Fully NEG-coated vacuum system design for the storage ring of Iranian Light Source Facility
-
Hossein Karimi
()
-
16:40
Evaluation of 3D-printed plastics for ultra-high vacuum applications: Outgassing, and residual gas analysis
-
Artur Domingues
()
-
16:40
Mechanical design and analysis for a DMM at the EMBL@PETRA III beamline P14
-
Enrique Rodriguez Garcia
()
-
16:40
Comparison of FEA simulations and experimental data for a new germanium detector for X-ray spectroscopy at synchrotron facilities
-
Marcos Quispe
()
-
16:40
As-build process for accelerator, target and neutron scattering systems at European Spallation Source
-
Antoine Lepine
()
-
16:40
Improvement of structural dynamic stability experimental assessment: principle and actual performance of advanced methods
-
Nicolas Jobert
()
Zhengxuan Fan
()
-
16:40
From 80 nrad to 35 nrad: active damping control achieves sub-50-nrad stability in SHINE's beamline mirror system
-
Fang Liu
()
-
16:40
Nano-tomography instrumentation based on magnetically levitated 6 DoF actuation
-
Theo Ruijl
()
-
16:40
Simulation approaches for magnet design in the ALBA II synchrotron upgrade
-
Barbara de Abreu Francisco
()
-
16:40
Advanced motor test bench developments for beamline motion system characterization
-
David Kraft
()
