Skip to main content
1–6 Jun 2025
Taipei International Convention Center (TICC)
Asia/Taipei timezone

Assembly and testing of a QWR for the new ISIS MEBT

TUPS047
3 Jun 2025, 16:00
2h
Exhibiton Hall A _Salmon (TWTC)

Exhibiton Hall A _Salmon

TWTC

Poster Presentation MC4.A08 Linear Accelerators Tuesday Poster Session

Speaker

Dr Iker Rodriguez (Science and Technology Facilities Council)

Description

The quarter wave resonator (QWR, a.k.a. λ/4 resonator) for the new ISIS MEBT is a bunching cavity that longitudinally compresses the H- beam into smaller bunches. It has two gaps with a distance of βλ/2 between mid-gaps, and works in π mode at the resonant frequency of 202.5 MHz, with a phase angle of -90 degrees, and a maximum voltage per gap (E0L) of 55 kV. The detailed RF and thermal design was developed, followed by the manufacturing of a prototype, all being presented elsewhere. Several mechanical issues were noticed with the RF finger strips and tuners during the assembly of the prototype cavity. The manual tuner (to account for the manufacturing tolerances and the vacuum load) was machined to the final dimension to achieve the desired resonant frequency, according to the Vector Network Analyser (VNA) measurements. The measured quality factor was found to be much lower than expected, which required a redesign of some of the RF seals. The cavity was powered and conditioned in a relatively short time up to a nominal power, but severe multipacting was observed, initially only at low power, but later also at medium power levels, which required a creative approach to be fixed without a major cavity redesign.

Region represented Europe
Paper preparation format Word

Author

Dr Iker Rodriguez (Science and Technology Facilities Council)

Co-authors

Alan Letchford (Science and Technology Facilities Council) Jonathan Cawley (Science and Technology Facilities Council)

Presentation materials

There are no materials yet.