1–6 Jun 2025
Taipei International Convention Center (TICC)
Asia/Taipei timezone

Design of bellows in HALF vacuum system

MOPB115
2 Jun 2025, 16:00
2h
Exhibiton Hall A _Bear (TWTC)

Exhibiton Hall A _Bear

TWTC

Poster Presentation MC2.A24 Accelerators and Storage Rings, Other Monday Poster Session

Speaker

gangqiang ma (University of Science and Technology of China)

Description

The fourth generation HALF light source is a kind of storage ring light source based on diffraction limit. On the one hand, the shielded bellows in the vacuum system is used to compensate the thermal expansion and cold contraction of the vacuum chamber, and to adjust the longitudinal and transverse offset of the vacuum chamber according to the requirements of installation and collimation, on the other hand, it provides continuous shielding in the adjacent vacuum chamber to reduce the impedance of the beam pipe. The shielded bellows consists of a shielding finger, a contact finger and an inner tube, the contact finger acts on the inner tube, and the contact force comes from the elastic force formed by pressing the spring finger on the contact finger. In the structure, the high temperature area of the shielding finger is separated from the high stress area, so as to improve the durability of the bellows. The main mechanical parameters are as follows: longitudinal compression: ≥ 8mm; stretching: ≥ 8mm; lateral offset: ≥ 1mm; overall permeability ≤ 1.02 after welding, so that it can meet the requirements of vacuum system.

Region represented Asia
Paper preparation format Word

Author

gangqiang ma (University of Science and Technology of China)

Co-authors

Junke Xing (University of Science and Technology of China) Tao Huang (University of Science and Technology of China) Xinming Song (University of Science and Technology of China) jinghua wang (University of Science and Technology of China)

Presentation materials

There are no materials yet.