Name: IPAC'23 - 14th International Particle Accelerator Conference
Start: 2023-05-07T09:00:00+02:00
End: 2023-05-12T17:00:00+02:00
Location: Venice, Italy

3D polarisation of a structured laser beam and prospects for its application to charged particle acceleration (in session "Tuesday Poster Session")

4D Transverse Phase Space characterization of high brightness electron beams at PITZ (in session "Thursday Poster Session")

5 MeV Beam Transport System for MESA (in session "Monday Poster Session")

5D phase-space reconstruction of an electron beam (in session "MC06.2 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Contributed)")

20 T dipole magnet based on hybrid hts/lts cos-theta coils with stress management (in session "Wednesday Poster Session")

60° phase advance optics measurements in the Large Hadron Collider at CERN (in session "Monday Poster Session")

80% reduction in CO2 footprint with Hybrid Current Leads (in session "Wednesday Poster Session")

166.6 MHz HOM damped copper cavity designed for 4th generation synchrotron radiation sources (in session "Wednesday Poster Session")

200 kV Ion Accelerator Facility at Kurukshetra University: SO-55 Ion Source (in session "Tuesday Poster Session")

750 MHz IH-DTL for a proton therpy linac (in session "Monday Poster Session")

A 1-2 GHz stochastic cooling system for antiprotons and rare isotopes (in session "Tuesday Poster Session")

A 5 MeV Compton transmission polarimeter designed for a SRF photogun (in session "Student Poster Session")

A 100 mA RFQ Beam Dynamics Design with Small Output Beam Emittance (in session "Wednesday Poster Session")

A new NEG coating setup with travelling thin solenoids for the SLS 2.0 complex vacuum chambers (in session "Thursday Poster Session")

A bead-pulling test stand for s-band cavities (in session "Wednesday Poster Session")

A booster free from spin resonances for future 100 km-scale circular e+e- colliders (in session "Monday Poster Session")

A Booster Replacement Linac for the Future of High Energy Physics at Fermilab (in session "Monday Poster Session")

A bright future for new innovative and excellent opportunities for science at FLASH (in session "Tuesday Poster Session")

A C-band test platform for the development of RF photo cathode and high gradient accelerating structures (in session "Tuesday Poster Session")

A Compact Accelerator-based Light Source for High-power, Full-bandwidth Tunable Coherent THz Generation (in session "Tuesday Poster Session")

A compact and mobile system for breast irradiation in prone position (in session "Thursday Poster Session")

A Compact Dielectric Grating-Based Charged Particle Bunch Length Diagnostic Device at ARES (in session "Student Poster Session")

A compact dielectric grating-based charged particle bunch length diagnostic device at ARES (in session "Thursday Poster Session")

A Compton transmission polarimeter for DC and SRF electron photo-injectors (in session "Thursday Poster Session")

A conceptual design of FFA ring for super heavy element production adopting the ERIT mechanism. (in session "Monday Poster Session")

A consecutive double-slit emittance meter for high-brightness electron source (in session "Thursday Poster Session")

A Double Bend Achromat Hybrid Pulsed Synchrotron Lattice for Accelerating Muons to 5 TeV (in session "Monday Poster Session")

A DSRD-Based Pulse Forming Network for a Dielectric Wall Accelerator (in session "Tuesday Poster Session")

A feasibility study into the Quasi-Frozen Spin regime of operation of the NICA storage ring (in session "Monday Poster Session")

A Fixed Field Alternating Gradient Lattice Design for Acceleration to energies as high as 5 TeV (in session "Monday Poster Session")

A force-neutral adjustable phase undulator for a compact X-ray FEL (in session "Tuesday Poster Session")

A generalized tool to compute wake potential and impedance from electromagnetic time domain simulations (in session "Wednesday Poster Session")

A high brightness beam test facility for ERL applications (in session "Tuesday Poster Session")

A high brightness electron beam research and application beamline at Tsinghua University (in session "Tuesday Poster Session")

A high-current low-energy storage ring for photon-hungry applications (in session "Monday Poster Session")

A low energy linac solution for 3D scanning applications (in session "Wednesday Poster Session")

A low-latency feedback system for the control of horizontal betatron oscillations (in session "Thursday Poster Session")

A machine learning approach to shaping magnetic fringe fields for beam dynamics control (in session "Wednesday Poster Session")

A Microwave Test Bench for the Electromagnetic Characterization of Elettra 2.0 Diagnostics and Vacuum Chamber Components (in session "Wednesday Poster Session")

A modified round to flat beam transformation lattice for angular dispersion induced microbunching technique (in session "Wednesday Poster Session")

A MTCA.4-based resonance controller for superconducting cavities (in session "Thursday Poster Session")

A nanosecond power supply for grid-controlled electron gun used in HALF (in session "Wednesday Poster Session")

A nanosecond power supply for grid-controlled electron guns (in session "Student Poster Session")

A new center for heavy ion research (in session "Thursday Poster Session")

A new class of fast power converters for the Elettra 2.0 storage ring (in session "Wednesday Poster Session")

A new power supply for the pulsed bending magnet in J-PARC 3–50bt (in session "Tuesday Poster Session")

A new product lifecycle management platform for CERN’s accelerator complex and beyond (in session "Thursday Poster Session")

A novel dual-channel kicker for the Hefei Advanced Light Facility (in session "Monday Poster Session")

A novel fiber-optic beam monitor (in session "Wednesday Poster Session")

A novel fibre optic monitor for VHEE UHDR beam monitoring: first tests at CLEAR (in session "Thursday Poster Session")

A Novel Fibre Optic Monitor for VHEE UHDR Beam Monitoring: First Tests at CLEAR (in session "Student Poster Session")

A Novel Large Energy Acceptance Beamline for Hadron Therapy (in session "Student Poster Session")

A novel large energy acceptance beamline for hadron therapy (in session "Thursday Poster Session")

A novel method to suppress the emittance variation in extremely low emittance light source storage rings (in session "MC05.2 - Beam Dynamics and Electromagnetic Fields (Contributed)")

A novel scheme based on angular dispersion-induced microbunching mechanism for harmonic generation in storage ring (in session "Tuesday Poster Session")

A positron source demonstrator for future colliders (in session "Tuesday Poster Session")

A proposal for generating fully coherent X-ray FEL with femtosecond pulse based on fresh-slice (in session "Tuesday Poster Session")

A public data service for the Beam Interlock Systems at CERN - current status and future plans (in session "Thursday Poster Session")

A pulsed muon source based on a high-repetition-rate electron accelerator (in session "Tuesday Poster Session")

A Pulsed Wien Filter as a Low-Energy Kicker (in session "Tuesday Poster Session")

A pulser R&D for the HEPS booster bumper magnet (in session "Monday Poster Session")

A Python API for the particle tracking code PLACET (in session "Wednesday Poster Session")

A report on a lower emittance lattice at MAX IV 3 GeV storage ring (in session "Monday Poster Session")

A scheme to extract the beam in advance and transverse beam distribution measurement for the CSNS RCS (in session "Tuesday Poster Session")

A short-length transport line for laser-plasma accelerators using HTS periodic magnets (in session "MC07.2 - Accelerator Technology and Sustainability (Contributed)")

A Simulation Study on Residual Gas Chamber Based Photon Beam Position Monitor (in session "Thursday Poster Session")

A space charge forces analytical model for emittance compensation (in session "Wednesday Poster Session")

A Space Charge Forces analytical model for emittance compensation (in session "Student Poster Session")

A start-to-end optimisation of CLEAR for an inverse Compton scattering experiment, using RF-Track (in session "Tuesday Poster Session")

A Study on Differentiable Space Charge Model Based on the Green’s Function Solver (in session "MC05.3 - Beam Dynamics and Electromagnetic Fields (Contributed)")

A THz superconducting undulator for flute - Design parameters and layout (in session "Monday Poster Session")

A tungsten neutron-generating target of a neutron source based on a subcritical assembly driven with an electron accelerator (in session "Tuesday Poster Session")

A two harmonics circuit for the powering of the very fast RCS (Rapid Cycling Synchrotron) of the muon collider accelerator (in session "Wednesday Poster Session")

A UV Pump laser System for micro-UED at Cornell (in session "Thursday Poster Session")

A w-band corrugated waveguide for wakefield acceleration at the AWA emittance exchange beamline (in session "Tuesday Poster Session")

About the damage mechanisms of thin targets exposed to high-power particle beams (in session "Thursday Poster Session")

Absolute Calibration of BSI monitors in the SPS North Area at CERN (in session "Student Poster Session")

Absolute calibration of BSI monitors in the SPS North Area at CERN (in session "Thursday Poster Session")

Absolute charge measurements with pick-ups (in session "Thursday Poster Session")

AC excitation studies for full coupling operation (in session "Monday Poster Session")

Accelerating dynamic aperture evaluation using deep neural networks (in session "Wednesday Poster Session")

Acceleration of electrons from a linear accelerator by a laser driven plasma wave at CLARA (in session "MC03.3 - Novel Particle Sources and Acceleration Techniques (Contributed)")

Accelerator and beam physics challenges in support of FRIB experiments (in session "Tuesday Poster Session")

Accelerator driven system – a solution to multiple problems of society (in session "Friday Plenary")

Accelerator operation performance during the NSC KIPT SCA neutron source physical start up (in session "MC08.1 - Applications of Accelerators, Technology Transfer and Industrial Relations and Outreach (Contributed)")

Accelerator physics challenges for EIC (in session "MC01.2 - Colliders and other Particle Physics Accelerators (Invited)")

Accelerator physics experiments at the versatile SRF photoinjector of SEALab (in session "Tuesday Poster Session")

Accelerator researchers who have helped me (in session "Prize Session")

Accelerators for particle physics (in session "Friday Plenary")

Accurate control of seed and free-electron laser chirp with bunching spectral analysis (in session "Tuesday Poster Session")

Accurate prediction of mega-electron-volt electron beam properties from UED using machine learning (in session "Thursday Poster Session")

Accurate, quasi-3D modeling of single-beam and multiple-beam klystrons and iots by the Tesla-family of large-signal codes (in session "Wednesday Poster Session")

Achieving competitive overall energy-transfer efficiency in a plasma accelerator (in session "Tuesday Poster Session")

Achromatic low energy merger for energy recovery linacs (in session "Monday Poster Session")

Active deep learning for nonlinear optics design of a vertical FFA accelerator (in session "Wednesday Poster Session")

Activities at INFN LASA on ESS Medium Beta Cavities (in session "Tuesday Poster Session")

Activity inventories and decay heat generation of the LIEBE target at CERN (in session "Thursday Poster Session")

Adaptable gun pulser suitable for single bunch and programmed multibunch top-up and fill of storage ring light source (in session "Monday Poster Session")

Additive Manufacturing of 6 GHz seamless SRF copper cavities: printing, surface treatments and performance investigations (in session "Thursday Poster Session")

Additive manufacturing of copper RF structures for particle accelerator applications (in session "MC07.1 - Accelerator Technology and Sustainability (Contributed)")

Additively manufactured tantalum cathode for FEBIAD type ion sources: production, geometric measurements, and high temperature test (in session "Thursday Poster Session")

Adiabatic capture in the FETS-FFA ring (in session "Tuesday Poster Session")

Adiabatic capture of longitudinal phase space (in session "Wednesday Poster Session")

Adjoint optimization of circular lattices (in session "Wednesday Poster Session")

Adjoint perturbations and their applications to the design of vacuum RF sources (in session "Wednesday Poster Session")

Advanced accelerators for high energy physics and Snowmass AF06 (in session "Monday Poster Session")

Advanced basic layout of the Helmholtz LInear Accelerator for cw heavy ion beams at GSI (in session "Tuesday Poster Session")

Advanced studies for the dynamics of high brightness electron beams with the code MILES (in session "Wednesday Poster Session")

Advanced Techniques for Flight Path Alignment at LANSCE (in session "Thursday Poster Session")

Advancements in injection efficiency modelling for the Low Energy Ion Ring (LEIR) at CERN (in session "Monday Poster Session")

Advancements in the scintillation fibre beam monitor for low-intensity ion beams at HIT (in session "Thursday Poster Session")

Advancements of ELBE timing system upgrade (in session "Thursday Poster Session")

Advances in a perturbation theory for the microbunching instability in free-electron laser injectors (in session "Wednesday Poster Session")

Affordable, efficient injection-locked magnetrons for superconducting cavities (in session "Wednesday Poster Session")

AGS booster beam-based main quadrupole transfer function measurements (in session "Thursday Poster Session")

AI-ML developments for Heavy Ion Linac operations (in session "Thursday Poster Session")

AISHa: an ECRIS for nuclear-physics, new clinical protocols and material experiments (in session "Tuesday Poster Session")

ALBA beam lifetime optimization using RCDS (in session "Wednesday Poster Session")

ALBA II accelerator upgrade project status (in session "MC02.2 - Photon Sources and Electron Accelerators (Contributed)")

ALBA-II first tolerance studies (in session "Wednesday Poster Session")

Alignment activities of storage ring at Taiwan Photon Source (in session "Thursday Poster Session")

Alignment Strategy for HALF (in session "Wednesday Poster Session")

Alkali-antimonide photocathode transport in a vacuum-sealed canister (in session "Tuesday Poster Session")

Alternative Diamond-II storage ring optics with high beta section for improved injection (in session "Monday Poster Session")

Alvarez drift tube linac for medical applications in the framework of HITRIplus project (in session "Tuesday Poster Session")

Amplitude dependent tune shift measurements at KARA (in session "Wednesday Poster Session")

An Active Q-switched X-ray Regenerative Amplifier Free-Electron Laser (in session "Tuesday Poster Session")

An advanced digital feedback control system design for the muon linear accelerator (in session "Thursday Poster Session")

An Analysis of Methods to Generate a 4D Transverse Phase Space Distribution with Angular Momentum (in session "Wednesday Poster Session")

An beam line setup for flash radiation therapy with focused electron beams at the Pitz facility at DESY in Zeuthen: basic concept and dosimetry simulations (in session "Thursday Poster Session")

An effective use of calibration measurements for the CNAO pickup (in session "Thursday Poster Session")

An electron model of vertical FFA accelerator for Harmonytron (in session "Tuesday Poster Session")

An experimental study of X-Y emittance repartitioning in KEK-STF (in session "MC01.2 - Colliders and other Particle Physics Accelerators (Contributed)")

An improved method for linear optics and coupling correction based on closed orbit modulation (in session "Wednesday Poster Session")

An improved procedure for energy matching between PS and SPS at CERN (in session "Tuesday Poster Session")

An in-vacuum measurement system for CPMUs at Diamond Light Source (in session "Monday Poster Session")

An introduction to the UK XFEL conceptual design and options analysis (in session "Tuesday Poster Session")

An introduction to future accelerator based projects and the technological trends in Asia/Australia (in session "Industry Session 1")

An iterative algorithm to estimate the energy spectrum of an electron beam from PDD curves (in session "Monday Poster Session")

An objective approach to determining the steel penetration capabilities of X-ray cargo inspection systems (in session "Thursday Poster Session")

An online analysis platform for improving X-ray light source operations (in session "Thursday Poster Session")

An Optimized Water Cooling Scheme of Solid State Power Source for Accelerator (in session "Monday Poster Session")

An upgraded universal frequency divider module for the new FLASH2020+ RF reference generation system (in session "MC06.2 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Contributed)")

Analysis of a double-resonance crossing for beam splitting (in session "Wednesday Poster Session")

Analysis of Linear Induction Accelerator Physics with Field-Adapted Coordinate Transformations (in session "Wednesday Poster Session")

Analysis of losses and protection of the electrostatic septum anode wires in SIS18 (in session "Tuesday Poster Session")

Analysis of monochromatic properties of crystals under transient thermal loading (in session "Tuesday Poster Session")

Analysis of orbit measurements with the new High Luminosity LHC collimator beam position monitors in the LHC run 3 (in session "Monday Poster Session")

Analysis of single-bunch instabilities for Diamond-II (in session "Wednesday Poster Session")

Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply (in session "Wednesday Poster Session")

Analysis of the Diamond-II booster dipole magnets (in session "Wednesday Poster Session")

Analytic and numerical calculation of collider luminosity with CRAB dynamics (in session "Wednesday Poster Session")

Analytic calculations of RDT and detuning generated by beam-beam collisions and wire correctors (in session "Wednesday Poster Session")

Analytic derivative of orbit response matrix and dispersion with thick error sources and thick steerers implemented in python (in session "Monday Poster Session")

Analytical formulae for the longitudinal impedance of two parallel layers with arbitrary complex permittivity and permeability (in session "Wednesday Poster Session")

Analytical potential model for the Radio-Frequency Quadrupole at the European Spallation Source (in session "Wednesday Poster Session")

Analyzing and optimizing dynamic aperture based on minimizing the fluctuation of resonance driving terms (in session "Wednesday Poster Session")

Anodic bonding of silicon and glass for bent monochromator (in session "Thursday Poster Session")

Application for Anomaly Detection in the Storage Ring Power Supplies of APS-U (in session "Thursday Poster Session")

Application of a modified feedforward control algorithm for superconducting cavity (in session "Monday Poster Session")

Application of beam-based alignment to the CLEAR facility (in session "Wednesday Poster Session")

Application of High Precision RF Measurement for ESS Cavities (in session "Tuesday Poster Session")

Application of low-energy, tunable-delay ultrashort electron bunch pairs for irradiation experiments (in session "Thursday Poster Session")

Application of three families of sextupoles at the KARA ring of Karlsruhe Institute of Technology (in session "Monday Poster Session")

Arbitrary bunch shaping via wake potential tailoring (in session "MC05.2 - Beam Dynamics and Electromagnetic Fields (Invited)")

Arbitrary transverse and longitudinal correlation generation using transverse wiggler and wakefield structures (in session "Wednesday Poster Session")

Architecture overview of the FGCDv2, CERN's brand-new power converters control framework (in session "Wednesday Poster Session")

Artificial Intelligence for improved facilities operation in the FNAL LINAC (in session "Thursday Poster Session")

Assembly, alignment and tuning of the XiPAF DTL (in session "Monday Poster Session")

Assessment of beam-intercepting device robustness for intensity increase in CERN’s North Area (in session "Wednesday Poster Session")

Asymmetric effects in shock-injection of laser-plasma acceleration of electrons (in session "MC03.3 - Novel Particle Sources and Acceleration Techniques (Contributed)")

ATLAS operations shift log software upgrade and implementation (in session "Thursday Poster Session")

Attosecond pulse shaping of X-ray free-electron lasers and applications to coherent control in quantum systems (in session "Tuesday Poster Session")

Attosecond pulse shaping of X-ray free-electron lasers and applications to coherent control in quantum systems (in session "Student Poster Session")

Automated evaluation of LHC proton losses during high-energy beam dumps for the Post-Mortem System (in session "Monday Poster Session")

Automated Faraday cup readings at ATLAS (in session "Thursday Poster Session")

Automated RF-conditioning utilizing machine learning (in session "Monday Poster Session")

Automating beam dump failure detection using computer vision (in session "Thursday Poster Session")

AWAKE from Run 2a to Run 2b (in session "Tuesday Poster Session")

AWAKE: driving plasma wakefields with a proton bunch and accelerating electrons for particle phyics applications (in session "Tuesday Poster Session")

A CBXFEL demonstrator setup at the European XFEL (in session "Tuesday Poster Session")

BAM system and machine stability at SXFEL (in session "Thursday Poster Session")

Band gap modification in few-layer MoS2 using Pelletron accelerator (in session "Thursday Poster Session")

Basic high-power design of a 1.5-GHz TM020-type harmonic cavity for the KEK future light source (in session "Wednesday Poster Session")

Bayesian optimization calibration of ionization profile monitor at the AGS complex (in session "Thursday Poster Session")

Bayesian Optimization for SASE Tuning at the European XFEL (in session "Thursday Poster Session")

Bayesian optimization of the dynamic aperture in UVSOR-IV design study (in session "Monday Poster Session")

Bayesian optimization for high-power X-ray vortex generation (in session "Tuesday Poster Session")

BDSIM v1.7.0 developments for the modelling of accelerators and their environment (in session "Wednesday Poster Session")

Bead-pull analysis of HOM in X-band linearizer linac on CLARA, with update on HOM measurement system (in session "Thursday Poster Session")

Bead-Pull of 0.2 THz Strucutre and Technical Issues (in session "Monday Poster Session")

Beam absorbing material candidates for primary collimators for FCC-ee (in session "Monday Poster Session")

Beam background study at BEPCII (in session "Monday Poster Session")

Beam backgrounds at the CEPC (in session "Monday Poster Session")

Beam based alignment of focusing solenoids at ARES (in session "Tuesday Poster Session")

Beam Based Alignment Using a Neural Network (in session "Monday Poster Session")

Beam Breakup Studies for the C3 Linear Collider (in session "Wednesday Poster Session")

Beam characterization and optimisation for AWAKE 18 MeV electron line (in session "Monday Poster Session")

Beam commissioning of the HEPS Linac (in session "Tuesday Poster Session")

Beam commissioning of the waste beam line (in session "Tuesday Poster Session")

Beam coupling impedance contribution of flange aperture gaps: a numerical study for Elettra 2.0 (in session "Wednesday Poster Session")

Beam delivery of high-energy ion beams for irradiation experiments at the CERN Proton Synchrotron (in session "Monday Poster Session")

Beam Delivery System for BNCT at Tokyo Institute of Technology (in session "Student Poster Session")

Beam delivery system for BNCT at Tokyo Institute of Technology (in session "Thursday Poster Session")

Beam diagnostics and instrumentation for MESA (in session "Thursday Poster Session")

Beam Dynamics for Concurrent Operation of the LHeC and the HL-LHC (in session "Student Poster Session")

Beam dynamics for concurrent operation of the LHeC and the HL-LHC (in session "Monday Poster Session")

Beam dynamics for the RUEDI microscopy beamline (in session "Tuesday Poster Session")

Beam dynamics in the NEWGAIN project at GANIL-SPIRAL2 (in session "Wednesday Poster Session")

Beam dynamics of the RUEDI diffraction beamline (in session "Tuesday Poster Session")

Beam dynamics optimization for high gradient beam driven plasma wakefield acceleration at SPARC-Lab (in session "MC05.3 - Beam Dynamics and Electromagnetic Fields (Contributed)")

Beam dynamics optimization of a modular and versatile linear accelerator-based system exploiting C-Band technology for VHEE FLASH Applications (in session "Tuesday Poster Session")

Beam Dynamics Optimization of an Electron Linac Using the Multi-Objective Genetic Algorithm (in session "Tuesday Poster Session")

Beam dynamics optimization of EuPRAXIA@SPARC_LAB RF injector (in session "Wednesday Poster Session")

Beam dynamics optimization of the EuPRAXIA@SPARC_LAB RF photoinjector (in session "Student Poster Session")

Beam dynamics studies for the FCC-ee collimation system design (in session "Monday Poster Session")

Beam dynamics studies for the target beamlines of the high brilliance neutron source (in session "Tuesday Poster Session")

Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL (in session "Wednesday Poster Session")

Beam dynamics study of the high-power electron beam irradiator using niobium-tin superconducting cavity (in session "Wednesday Poster Session")

Beam injection issues at SuperKEKB (in session "Monday Poster Session")

Beam injection using a nonlinear kicker for the HLS-II storage ring (in session "Monday Poster Session")

Beam injection with an anti-septum into the HALF storage ring (in session "Monday Poster Session")

Beam instrumentation for real time FLASH dosimetry: experimental studies in the CLEAR facility (in session "Thursday Poster Session")

Beam Instrumentation Hardware Architecture for Upgrades at the BNL Collider-Accelerator Complex and the Future Electron Ion Collider (in session "Thursday Poster Session")

Beam lifetime monitoring using beam loss monitors during LHC Run 3 (in session "Thursday Poster Session")

Beam loading compensation in the CERN SPS 200 MHz cavities. Measurements and comparison with expectations (in session "Thursday Poster Session")

Beam loading compensation of traveling wave LINAC to a multi-bunch pulse with gaps (in session "Monday Poster Session")

Beam Loading Effects in Standing-Wave LINACs and their Implementation into the Particle Tracking Code RF-Track (in session "Student Poster Session")

Beam loading effects in standing-wave linacs and their implementation into the particle tracking code RF-Track (in session "Wednesday Poster Session")

Beam loading simulations in PyAT for the ESRF (in session "Wednesday Poster Session")

Beam loss monitoring through emittance growth control and feedback with design (in session "Tuesday Poster Session")

Beam loss monitoring with fixed and translating scintillation detectors along the Fermilab drift-tube linac (in session "Thursday Poster Session")

Beam loss monitors characterization for SPES proton beam line (in session "Thursday Poster Session")

Beam Measurements from Proton Testbeam At KAHVE-Lab (in session "Thursday Poster Session")

Beam optics update for EIC HSR-IR2 (in session "Monday Poster Session")

Beam options for the REDTOP experiment (in session "Monday Poster Session")

Beam performance and operational efficiency at the CERN Proton Synchrotron (in session "Tuesday Poster Session")

Beam polarization studies at the CEPC (in session "Monday Poster Session")

Beam profile measurement using the highly-oriented pyrolytic graphite (in session "Thursday Poster Session")

Beam properties beyond the therapeutic range at HIT (in session "Thursday Poster Session")

Beam Simulations of the ALBA and BESSY II Electron Guns (in session "Tuesday Poster Session")

Beam size measurement developments at SLS (in session "Thursday Poster Session")

Beam study on low dispersion CEBAF arcs (in session "Wednesday Poster Session")

Beam test of physics applications at the beam commissioning of the RAON accelerator (in session "Tuesday Poster Session")

Beam tomography with coupling using maximum entropy technique (in session "MC05.3 - Beam Dynamics and Electromagnetic Fields (Contributed)")

Beam Trajectory Control with Lattice-Agnostic Reinforcement Learning (in session "Student Poster Session")

Beam trajectory control with lattice-agnostic reinforcement learning (in session "Thursday Poster Session")

Beam transfer line of Wuhan Advanced Light Source (in session "Monday Poster Session")

Beam transfer lines design study for 30-40 mA proton beam for Boron Neutron Capture Therapy facility (in session "Tuesday Poster Session")

Beam transport and diagnostics for the space plasma experiment at Samurai (in session "Tuesday Poster Session")

Beam-based alignment of beam position monitors at SLS 2.0 (in session "Monday Poster Session")

Beam-based alignment of individual members of sextupole families (in session "Thursday Poster Session")

Beam-based characterization of a non-linear injection kicker at BESSY II (in session "Monday Poster Session")

Beam-beam long range compensator mechanical demonstrator (in session "Thursday Poster Session")

Beam-beam long-range wire compensators in LHC Run 3 (in session "Wednesday Poster Session")

Beam-Impact Validation of HL-LHC Collimator Materials: the "MultiMat-2" Experiment (in session "Wednesday Poster Session")

Beam-induced heating mitigation of the SPS kickers: a crucial upgrade to move towards HL-LHC beam intensities (in session "Wednesday Poster Session")

Beam-ion Instabilities and Their Mitigation for SOLEIL II (in session "Wednesday Poster Session")

Benchmark and performance of beam-beam interaction models for XSUITE (in session "Monday Poster Session")

Benchmark and performance of beam-beam interaction models for XSUITE (in session "Student Poster Session")

Benchmarking for CODAL beam dynamics code: laser-plasma accelerator case study (in session "Wednesday Poster Session")

Benchmarking HPSim with the LANSCE Linac (in session "Tuesday Poster Session")

Benchmarking simulations of slow extraction driven by RF transverse excitation at the CERN Proton Synchrotron (in session "Tuesday Poster Session")

Benchmarking the FCC-ee positron source simulation tools using the SuperKEKB results (in session "Monday Poster Session")

Bending magnet photon absorber design and calculations for Elettra 2.0 storage ring (in session "Monday Poster Session")

BESSY III - status and overview (in session "Monday Poster Session")

Bhabha scattering model for multi-turn tracking simulations at the FCC-ee (in session "Monday Poster Session")

Bi-periodic undulator innovative insertion device for SOLEIL II (in session "Wednesday Poster Session")

Bimodal design of 500 MHz and 1.5 GHz normal conducting RF cavity for advanced synchrotron radiation facilities (in session "Wednesday Poster Session")

Bloch equation for the description of linear coupling in storage rings (in session "Wednesday Poster Session")

Booster conceptual design of the Southern Advanced Photon Source (in session "Monday Poster Session")

BPM design and simulation based on Hefei advanced light source (in session "Thursday Poster Session")

BPM offset measurements at rapid cycling synchrotron in China Spallation Neutron Source (in session "Wednesday Poster Session")

Brixsino high-flux dual X-ray and THz radiation source based on energy recovery linacs (in session "Tuesday Poster Session")

Broad band impedance effects on Elettra 2.0 (in session "Monday Poster Session")

Broad range single-shot electron energy spectrometer for THz driven booster accelerator using an in-vacuum tunable dipole magnet (in session "Tuesday Poster Session")

Bruno Touschek Award Presentation (in session "Prize Session")

Budget, procurement and risk management for the HL-LHC project (in session "Tuesday Poster Session")

Bunch Cleaning in a Multi-GeV Electron Storage Ring for High Bunch Purity Operations (in session "Monday Poster Session")

Bunch length measurement based on Cherenkov radiation spectrum at PolFEL (in session "Tuesday Poster Session")

Bunch lengthening by a third-harmonic cavity in a low-emittance ring (in session "Wednesday Poster Session")

Bunch lifetime analysis based on the injection interval at SuperKEKB (in session "Monday Poster Session")

Bunch-by-bunch transverse position measurement during injection (in session "Thursday Poster Session")

Burst mode compact optical cavity for Inverse Compton scattering sources (in session "Monday Poster Session")

Button Type Beam Position Monitor Design for the Elettra 2.0 Storage Ring (in session "Thursday Poster Session")

ByPass optics design in NICA storage ring for experiment with polarized beams for EDM search (in session "Monday Poster Session")

C-band photoinjector radiofrequency cavity design for enhanced beam generation (in session "Tuesday Poster Session")

Calculation for a compact laser plasma undulator beamline based on the experimental beam parameters at NCU (in session "Tuesday Poster Session")

Calculation for a compact laser plasma undulator beamline based on the experimental electron parameters at NCU (in session "Student Poster Session")

Calculation of beam sizes in coupled electron storage rings (in session "Wednesday Poster Session")

Calibration assessment of the PSI proton therapy Gantry 2 scanning system after 10 years of operation (in session "Thursday Poster Session")

Calibration of LLRF Systems at ESS (in session "Thursday Poster Session")

Calibration of the 2-phase bubble tracking model for liquid mercury target simulation with machine learning surrogate models (in session "Monday Poster Session")

Calibration of the LHC Diamond Beam Loss Monitors for LHC Run 3 (in session "Student Poster Session")

Calibration of the LHC Diamond beam loss monitors for LHC Run 3 (in session "Thursday Poster Session")

Calibration of the Main Linac Cryomodule Cavities for the CBETA Energy Recovery Linac (in session "Monday Poster Session")

Can additive manufactured materials meet ISO cleanroom standards? (in session "Thursday Poster Session")

Capacitive BPM electromagnetic design optimisation (in session "Thursday Poster Session")

Carrier-envelope phase stabilization in FEL oscillators (in session "Tuesday Poster Session")

Cavity mirror development for optical enhancement cavity of steady-state microbunching light source (in session "Monday Poster Session")

CEBAF 22 GeV FFA energy upgrade (in session "Monday Poster Session")

CEBAF Injector Model for K-Long bunch charge at 200 kV (in session "Wednesday Poster Session")

CEPC circumference optimization (in session "Monday Poster Session")

CEPC damping ring design in TDR stage (in session "Monday Poster Session")

CERN-MEDICIS: Operational indicators to support the production of new medical radionuclides by mass separation (in session "Wednesday Poster Session")

CERN’s beam instrumentation R&D study for FCC-ee (in session "Thursday Poster Session")

CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators (in session "Thursday Poster Session")

Challenges and solutions in the integration studies of the future circular collider (in session "Wednesday Poster Session")

Challenges for Fabricating Aluminium Alloy Insertion-Device Vacuum Chambers (in session "Thursday Poster Session")

Challenges for personnel safety systems during commissioning of ESS normal conducting linac (in session "Thursday Poster Session")

Challenges for the SIS100 emergency beam dump system (in session "Tuesday Poster Session")

Challenges of K-modulation measurements in the LHC Run 3 (in session "Monday Poster Session")

Challenging students into developing accelerator-based innovations to protect the environment (in session "MC08.1 - Applications of Accelerators, Technology Transfer and Industrial Relations and Outreach (Contributed)")

Characterisation and analysis of supersonic gas jets using interferometric measurement methods (in session "Thursday Poster Session")

Characterisation facilities for evaluating superconducting thin films for SRF cavities (in session "Wednesday Poster Session")

Characterisation of a Cs-implanted Cu photocathode (in session "Tuesday Poster Session")

Characterisation of microbunching instability at the FERMI Free Electron Laser (in session "MC07.1 - Accelerator Technology and Sustainability (Contributed)")

Characteristic study of the pulse bump magnet in HEPS (in session "Thursday Poster Session")

Characteristics of focused very high energy electron (VHEE) beams in radiotherapy (in session "Thursday Poster Session")

Characterization and optimization of laser-generated THz beam for THz based streaking (in session "Thursday Poster Session")

Characterization of elliptical single-cell Nb thin-film cavity at low temperatures (in session "Thursday Poster Session")

Characterization of high dynamic range beam emittance (in session "Wednesday Poster Session")

Characterization of in-vacuum wiggler for FAXTOR beamline at alba (in session "Wednesday Poster Session")

Characterization of plasma-discharge capillaries for plasma-based particle acceleration (in session "Tuesday Poster Session")

Characterization of plasma-discharge Capillaries for Plasma-based Particle Acceleration (in session "Student Poster Session")

Characterization of Sn100cv filler metal in UNS C10700 copper silver alloy vacuum soldering for Sirius vacuum chamber manufacturing (in session "Thursday Poster Session")

Characterization of the fast corrector dynamic response at the HEPS (in session "Wednesday Poster Session")

Characterization of the longitudinal beam coupling impedance and mitigation strategy for the fast extraction kicker KFA79 in the CERN PS (in session "Wednesday Poster Session")

Characterization of transverse profiles along the LHC injector chain at CERN (in session "Wednesday Poster Session")

Cherenkov diffraction radiation dielectric button characterization via a slab-line (in session "Thursday Poster Session")

Choosing Cavity Voltages and Phases for the CBETA Multi-Pass Energy Recovery Linac (in session "Monday Poster Session")

CLIC BDS 7 TeV design (in session "Student Poster Session")

Closed-orbit distortion study of XiPAF upgrading project synchrotron (in session "Tuesday Poster Session")

Closing crab dispersion by dispersive RF cavity in Electron-Ion Collider Hadron Storage Ring (in session "Monday Poster Session")

Cloud-based Neutron Transport Simulations and Variance Reduction with OpenMC (in session "Thursday Poster Session")

Coaxial Input Coupler Design For Wuhan Advanced Light Source (in session "Monday Poster Session")

Coherence in High Gain FELs: from electron intrabeam scattering to quantum effects (in session "MC05.4 - Beam Dynamics and Electromagnetic Fields (Invited)")

Coherent free-electron laser light with circular polarization at Fe L edge (in session "Tuesday Poster Session")

Collaboration between institutes and Thales: presentation of a successful technology transfer case study (in session "Industry Session 2")

Collimation performance of the 400MJ LHC beam at 6.8 TeV (in session "Tuesday Poster Session")

Collimation quench test at the LHC with a 6.8 TeV proton beam (in session "Monday Poster Session")

Collimation system for the updated FCC-hh design baseline (in session "Monday Poster Session")

Combined-function optics for the lattice of the CERN hadron-hadron Future Circular Collider ring (in session "Monday Poster Session")

Combining multi-objective genetic algorithm and neural network dynamically for the complex optimization problems in accelerator physics (in session "Wednesday Poster Session")

Commissioning and operation of the SPIRAL2 SC linac (in session "MC04.3 - Hadron Accelerators (Invited)")

Commissioning of 70 MeV proton cyclotron system of IBS and a plan for its utilization (in session "Tuesday Poster Session")

Commissioning of a 1.6 m long 16mm period superconducting undulator at the Australian Synchrotron (in session "MC07.3 - Accelerator Technology and Sustainability (Contributed)")

Commissioning of ESS normal-conducting linac instrumentation and implications for future hadron linacs (in session "Thursday Poster Session")

Commissioning of LCLSII injector (in session "Tuesday Poster Session")

Commissioning of new photocathode RF gun for oscillator-type mid-infrared free-electron laser at Kyoto University (in session "Thursday Poster Session")

Commissioning of orbit feedforward system for HEX superconducting wiggler at NSLS-II (in session "Wednesday Poster Session")

Commissioning of SupraLab: SRF cavity processing and testing facility at HZB (in session "Wednesday Poster Session")

Commissioning of the 2nd Bunch Compression Chicane for FLASH2020+ (in session "Tuesday Poster Session")

Commissioning of the low energy electron gun test stand at the University of Chicago (in session "Thursday Poster Session")

Commissioning of the RF system for the ThomX storage ring (in session "Monday Poster Session")

Commissioning of the RFQcb at the Isolde Offline 2 target test facility (in session "Tuesday Poster Session")

Commissioning of the S-band RF Transverse Deflecting Cavity at Dalian Coherent Light Source (in session "Tuesday Poster Session")

Commissioning of the ThomX heterodyne synchronisation system (in session "Thursday Poster Session")

Commissioning of the ThomX Storage Ring (in session "Monday Poster Session")

Commissioning of X-LAB: a very high-capacity X-band RF test stand facility at the University of Melbourne (in session "MC06.3 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Contributed)")

Commissioning Results of Phase Shifters at Dalian Coherent Light Source (in session "Tuesday Poster Session")

Commissioning simulations tools based on python Accelerator Toolbox (in session "Monday Poster Session")

Commissioning status of the Frankfurt Neutron Source FRANZ LEBT and RFQ (in session "Tuesday Poster Session")

Commissioning status of the RAON superconducting accelerator (in session "Tuesday Poster Session")

Commissioning strategies of hollow electron lens residual kick compensation (in session "Monday Poster Session")

Compact Accelerator-Based EUV Source Development Using Laser Compton Scattering (in session "Tuesday Poster Session")

Compact Carbon Ion Therapy Gantry Design (in session "Thursday Poster Session")

Compact electron beam transport system of AXSIS THz-driven electron accelerator employing adjustable high gradient permanent magnet quadrupole (in session "Tuesday Poster Session")

Compact High Power RF Sources for Integrated Linear Accelerator Systems (in session "Wednesday Poster Session")

Compact Single-Side-Pumped Terahertz-Driven Booster Accelerator (in session "Tuesday Poster Session")

Compact, mega-watt superconducting electron linear accelerators for environmental and industrial applications: projects and status (in session "Thursday Poster Session")

Comparison between Run 2 SEU measurements and FLUKA simulations in the CERN LHC tunnel and shielded alcoves around IP1/5 (in session "Thursday Poster Session")

Comparison of 352 MHz LINAC structures for injection into an ion therapy accelerator (in session "Student Poster Session")

Comparison of 352 MHz LINAC structures for injection into an ion therapy accelerator (in session "Tuesday Poster Session")

Comparison of design and production RF settings at SNS normal temperature linac (in session "Tuesday Poster Session")

Comparison of measurements and simulation results of dose for the FLASH radiation therapy beamline at PITZ (in session "Thursday Poster Session")

Comparison of tracking codes for beam-matter interaction (in session "Monday Poster Session")

Compatibility of non-evaporable ZAO®-based getter pumps with particle-sensitive vacuum applications (in session "Thursday Poster Session")

Complex bend prototype beamline design and commissioning (in session "Monday Poster Session")

Compression of relativistic electron bunch train (in session "Monday Poster Session")

Conception design for high-resolution reconstruction of fault occurrence (in session "Thursday Poster Session")

Conceptual design of a compact synchrotron-based facility for cancer therapy and biomedical research with helium and proton beams (in session "Thursday Poster Session")

Conceptual design of a super bend dipole magnet as a high-field radiation source for the ILSF storage ring (in session "Wednesday Poster Session")

Conceptual design of multipole injection kicker magnets for the ILSF storage ring (in session "Wednesday Poster Session")

Conceptual design of the high-power electron beam irradiator using niobium-tin superconducting cavity (in session "Thursday Poster Session")

Conceptual design of the low dark charge photocathode RF gun for Relativistic Ultrafast Electron Diffraction and Imaging (RUEDI) facility (in session "Tuesday Poster Session")

Conceptual design of the magnetised iron block system for the SHADOWS experiment (in session "Monday Poster Session")

Conceptual frequency analysis-based predictive maintenance (in session "Wednesday Poster Session")

Conceptual lattice design for vertical fixed field medical accelerators (in session "Thursday Poster Session")

Configuration and engineering integration in the IFMIF-DONES project (in session "Tuesday Poster Session")

Configuration management of the CERN accelerators complex on the road to long shutdown 3 (in session "Monday Poster Session")

Considerations for a new damping ring design of the FCC-ee pre-injector complex (in session "Monday Poster Session")

Construction and beam commissioning of the GeV-range test beamline at KEK PF-AR (in session "Monday Poster Session")

Construction and Installation of a 320kW Solid State Power Amplifier for Taiwan Photo Source. (in session "Wednesday Poster Session")

Construction of and experiments with a compact plasma source (in session "Thursday Poster Session")

Construction, assembly and measurements of the SPES RFQ (in session "Tuesday Poster Session")

Control of Electron Injection in LWFA with a Laser-ablated Aluminum Plasma by inserting a thin-layer of different metal. (in session "Tuesday Poster Session")

Control of Electron Injection in LWFA with a Laser-ablated Aluminum Plasma by inserting a thin-layer of different metal. (in session "Student Poster Session")

Cooling and thermomechanical studies for the IMPACT HIMB collimator system (in session "Tuesday Poster Session")

Cooling and thermomechanical studies for the impact tattoos beam dump design (in session "Tuesday Poster Session")

Coordinate transformation based on dual quaternion and total least squares adjustment (in session "Monday Poster Session")

Copper photocathodes for the modified 10 Hz gun on the CLARA accelerator (in session "Tuesday Poster Session")

Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties (in session "Tuesday Poster Session")

Correlation between the stoichiometry of

C s_{x} S b_{y}

and its photoemission properties and oxidation response (in session "Tuesday Poster Session")

Corrugated wakefield structures at SwissFEL (in session "Thursday Poster Session")

Coupled bunch stability with variable filling patterns in PETRA IV (in session "Wednesday Poster Session")

Coupled-bunch longitudinal instabilities with a harmonic cavity (in session "Wednesday Poster Session")

Coupler design for THz DLW LINACs (in session "Wednesday Poster Session")

Coupling between transverse and longitudinal beam dynamics in the first-stage CLIC decelerator (in session "Monday Poster Session")

CPMU development at diamond light source (in session "Monday Poster Session")

Cross-talk between magnets in the H6BA-cell of PETRA IV (in session "Wednesday Poster Session")

Cryogenic Current Comparator (CCC): absolute beam current measurement in the order of nA (in session "Thursday Poster Session")

Cryogenic oxygen deficiency hazard assessment at the National Synchrotron Radiation Research Center (in session "Thursday Poster Session")

Cryogenic surfaces in a room temperature SIS18 ion catcher (in session "Thursday Poster Session")

Cryogenic System of the NHa C400 Cyclotron (in session "Wednesday Poster Session")

Cryogenic Testing Infrastucture at UCLA (in session "Wednesday Poster Session")

Crystal collimation performance at the LHC with a 6.8 TeV proton beam (in session "Monday Poster Session")

CSR-induced projected emittance growth study for the beam switchyard at the European XFEL (in session "Wednesday Poster Session")

CsSb atomically smooth thin films as novel visible light photocathodes (in session "Tuesday Poster Session")

Current Status of Beam Operation at Compact ERL toward Free-Electron Laser with CW Mode (in session "Tuesday Poster Session")

Current Status of the Beam Dynamics Simulations for the HBS Drift Tube Linac (in session "Wednesday Poster Session")

Current status of the storage ring design of Korea-4GSR (in session "Wednesday Poster Session")

Cyclotron resonance accelerator for electron beams (in session "Tuesday Poster Session")

DAFNE run for the SIDDHARTA-2 experiment (in session "Monday Poster Session")

Damage experiment with superconducting sample coils - experimental setup and observations during beam impact (in session "Wednesday Poster Session")

Damage Experiment with Superconducting Sample Coils - Experimental Setup and Observations during Beam Impact (in session "Student Poster Session")

Damping ring and transfer lines of FCC-𝑒+𝑒− injector complex (in session "Monday Poster Session")

Dark current in the LCLS-II-HE superconducting injector (in session "Tuesday Poster Session")

Dark sector searches based on dielectric laser acceleration (in session "Monday Poster Session")

Data acquisition and archiving system for HEPS RF system based on Archiver Appliance (in session "Thursday Poster Session")

Data acquisition and supervision for the HL-LHC quench protection system – Part II the software stack (in session "Thursday Poster Session")

Data acquisition and supervision systems for the HL-LHC quench protection system - part I the hardware (in session "Thursday Poster Session")

Data analysis and control of an MeV ultrafast electron diffraction system and a photocathode laser and gun system using machine learning (in session "Monday Poster Session")

Data intensive science and particle accelerators: driving science and innovation (in session "Wednesday Poster Session")

DC and pulsed electron beam test facility at CERN (in session "Tuesday Poster Session")

DC septum magnet with low current density for the synchrotron light source (in session "Wednesday Poster Session")

DDBA-H6ba lattice for the nanometer-emittance design of Hefei Light Source (in session "Wednesday Poster Session")

Dealing with thermionic emission in wire scanners based on secondary electron emission (in session "Thursday Poster Session")

Definition of tolerances and corrector strengths for the orbit control of the High-Energy Booster ring of the future electron-positron collider (in session "Monday Poster Session")

Degrader beamline design at the CEBAF injector for machine acceptance studies (in session "Monday Poster Session")

Delivery of Low Momentum Muons for Muon EDM Studies at Fermilab (in session "Monday Poster Session")

Delivery status of the magnet system for the STAR high energy linac (in session "Tuesday Poster Session")

Democratization of Particles Therapy: Design of The Most Compact Multiroom Particle Therapy Facility (in session "Thursday Poster Session")

Demonstration of an electro-optic spectral interferometry longitudinal profile monitor at Clara (in session "Thursday Poster Session")

Demonstration of Beam Emittance Optimization using Reinforcement Learning (in session "Wednesday Poster Session")

Demonstration of Flat/Round Transformations of Angular Momentum and Space Charge Dominated Electron Beams (in session "Wednesday Poster Session")

Demonstration of non-local crystal shadowing at the CERN SPS (in session "Monday Poster Session")

Demonstration of three-dimensional spiral injection for the J-PARC muon g-2/EDM experiment (in session "Monday Poster Session")

Demonstration of transverse stability in an alternating symmetry planar dielectric structure (in session "Tuesday Poster Session")

Demonstration of transverse stability in an alternating symmetry planar dielectric structure (in session "Student Poster Session")

Deposition of NbTiN and NbN on 6 GHz seamless copper cavity (in session "Monday Poster Session")

Derivation and interpretation of parameters describing betatron mismatch and chromaticity (in session "Wednesday Poster Session")

Describing curved magnetic fields (in session "Wednesday Poster Session")

Design and commissioning of a 200-kV photocathode electron gun (in session "Thursday Poster Session")

Design and commissioning of a new SRF cavity for a conduction-cooled system (in session "Wednesday Poster Session")

Design and commissioning of the RF-KO extraction at CNAO (in session "Monday Poster Session")

Design and construction of a population inversion x-ray laser at LCLS (in session "Tuesday Poster Session")

Design and Development of Inverse Compton Scattering Hard X-Ray Source Based on Linear Accelerator of Polish Free Electron Laser (PolFEL) (in session "Thursday Poster Session")

Design and experimental research of UHV flanges for the Hefei Advanced Light Facility (in session "Thursday Poster Session")

Design and fabrication of the waveguide Iris couplers for the Spallation Neutron Source drift tube linac (in session "Monday Poster Session")

Design and integration on the test station for PSM of a 300 kW transmitter (in session "Monday Poster Session")

Design and Layout of TDS System for DALS-pre (in session "Wednesday Poster Session")

Design and modeling of dielectric a wakefield accelerator with plasma ionized witness bunch (in session "Tuesday Poster Session")

Design and optimisation of an 800 MHz 5-cell elliptical SRF cavity for T¯t working point of the future circular Electron-Positron Collider (in session "Monday Poster Session")

Design and optimization of a proton source extraction system for the JAEA-ADS linac (in session "Tuesday Poster Session")

Design and optimization of an ERL for cooling EIC hadron beams (in session "Monday Poster Session")

Design and optimization of diffraction-limited storage ring lattices based on many-objective evolutionary algorithms (in session "Wednesday Poster Session")

Design and precision research of Hefei Advanced Light Source Precision control network based on GNSS and elevation measurement (in session "Monday Poster Session")

Design and production of the fast HESR-injection kicker magnets (in session "Thursday Poster Session")

Design and simulation of EIC IR orbit control system (in session "Monday Poster Session")

Design and test of a metamaterial accelerating structure for Wakefield acceleration (in session "Tuesday Poster Session")

Design and test of C-band linac prototypes for electron flash radiotherapy (in session "Thursday Poster Session")

Design and Testing of a High-Gradient mm-Wave Accelerator Prototype (in session "Tuesday Poster Session")

Design and testing of the VSR blade tuner and actuators (in session "Thursday Poster Session")

Design and Thermomechanical Calculation of High-heat-load Absorber in WALS Storage Ring (in session "Thursday Poster Session")

Design and validation of the LEBT for the project LINAC 7, a low-current low-energy compact LINAC (in session "Wednesday Poster Session")

Design considerations for CERN´s second-generation Beam Interlock System (in session "Thursday Poster Session")

Design development and R&D for CERN’s HL-LHC external beam dump (in session "Tuesday Poster Session")

Design development and technological R&D for niobium-cladded beam production targets (in session "Thursday Poster Session")

Design modelling of RF injector for ICS gamma-ray source system (in session "Monday Poster Session")

Design of a 10.156 MHz pre-buncher for a heavy ion RFQ (in session "Monday Poster Session")

Design of a 10.156 MHz Pre-buncher for a heavy ion RFQ (in session "Student Poster Session")

Design of a 250 linac injector for the Southern Advanced Photon Source (in session "Monday Poster Session")

Design of a broadband modular permanent magnet electron energy spectrometer for FEBE (in session "Thursday Poster Session")

Design of a compact superconducting recoil separator for HIE-ISOLDE (in session "Tuesday Poster Session")

Design of a CW RFQ as axial injector of high intensity cyclotron (in session "Monday Poster Session")

Design of a High-Power Linac for the industrial production of Isotopes (in session "Thursday Poster Session")

Design of a hybrid seven-bend-achromat-based lattice for a super tau charm facility (in session "Monday Poster Session")

Design of a laser wakefield relativistic electron source (in session "Tuesday Poster Session")

Design of a new CERN SPS injection system via numerical optimisation (in session "Monday Poster Session")

Design of a new photo and thermionic hybrid mode 50 kV pulsed electron gun for ELSA (in session "Tuesday Poster Session")

Design of a new S-band 250 MeV electron linac with RF SLED compression for the CLS (in session "Tuesday Poster Session")

Design of a parallel-feeding deflecting cavity with variable polarization (in session "Wednesday Poster Session")

Design of a permanent quadrupole magnet with adjustable magnetic field gradient (in session "Monday Poster Session")

Design of a QWR cavity for the new ISIS MEBT (in session "Tuesday Poster Session")

Design of a S band high power klystron for BEPCII (in session "Monday Poster Session")

Design of an E x B chopper based on permanent magnets (in session "Tuesday Poster Session")

Design of an electron energy spectrometer and energy selector for laser-plasma driven beams at EPAC (in session "Thursday Poster Session")

Design of an electrostatic chopper for the new ISIS MEBT (in session "Tuesday Poster Session")

Design of an S-band buncher for KeV UED (in session "Monday Poster Session")

Design of CLIC beam delivery system at 7 TeV (in session "Monday Poster Session")

Design of final focus system for a super tau charm facility (in session "Monday Poster Session")

Design of magnets for Hefei advanced light facility (in session "Wednesday Poster Session")

Design of permanent magnet dipoles-quadrupoles with longitudinal gradient for the PETRA IV storage ring (in session "Wednesday Poster Session")

Design of synchrotron for proton flash radiotherapy (in session "Tuesday Poster Session")

Design of the ESS DTL mechanical supports (in session "Thursday Poster Session")

Design of the gradient dipole magnet for LLICTF (in session "Wednesday Poster Session")

Design of the Gradient Dipole Magnet for LLICTF (in session "Student Poster Session")

Design of the new 18 MeV electron injection line for AWAKE Run2c (in session "Monday Poster Session")

Design of the photocathode plug for the CARIE RF photoinjector (in session "Tuesday Poster Session")

Design of the pseudo single bunch mode in SPEAR3 (in session "Monday Poster Session")

Design of the Test Platform for High Current VHF Electron Gun (in session "Thursday Poster Session")

Design of transverse feedback kickers for the HEPS storage ring (in session "Monday Poster Session")

Design optimization for the construction of a linear accelerator driven BNCT facility (in session "Monday Poster Session")

Design optimization of the water-cooled coil for the LEIR extraction septum (in session "Thursday Poster Session")

Design Progress for Accelerators of a Super Tau Charm Facility in China (in session "Monday Poster Session")

Design Progress on 50MW Pulsed Power C-band Klystron Gun and Magnet (in session "Wednesday Poster Session")

Design status of RF system for the Korea 4th generation storage ring (in session "Monday Poster Session")

Design status of the Electron-Ion Collider (in session "Monday Poster Session")

Design Status of the Electron-Ion Collider Beam Instrumentation (in session "Thursday Poster Session")

Design study of 972-MHz RF and clock generator board at J-PARC linac (in session "Thursday Poster Session")

Design Study of button BPMs for the EIC Hadron Storage Ring (in session "Thursday Poster Session")

Design study of rebuncher system for KoBRA at RAON (in session "Thursday Poster Session")

Design, fabrication and cold-test of an x-band accelerating structure for linearizer (in session "Tuesday Poster Session")

Design, fabrication and measurement of a normal conducting quadrupole for a laser-plasma-accelerator-based beam transport line (in session "Wednesday Poster Session")

Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications (in session "Wednesday Poster Session")

Design, fabrication and verification of a 3MeV S-band medical linear accelerator (in session "Thursday Poster Session")

Design, testing, and validating the CLIC module pre-alignment and alignment systems (in session "Monday Poster Session")

Designing the spreaders and splitters for the FFA@CEBAF energy upgrade (in session "Monday Poster Session")

Designs and measurements of a new Superbend-magnet for WALS (in session "Wednesday Poster Session")

Detailed characterization of a five-dimensional phase space distribution (in session "Wednesday Poster Session")

Detailed design studies of the high energy beam transport line of the Minerva Project at SCK CEN (in session "Monday Poster Session")

Detailed Phase Space Reconstruction from Accelerator Beam Measurements Using Differentiable Simulations (in session "Thursday Poster Session")

Detector parametrisation for the front end test stand laserwire diagnostic using GEANT4 (in session "Thursday Poster Session")

Determination of the invariant spin axis in a COSY model using Bmad (in session "Tuesday Poster Session")

Developing a two-colour all-fibre balanced optical cross-correlator for sub-femtosecond synchronisation (in session "Thursday Poster Session")

Developing a Two-Colour All-Fibre Balanced Optical Cross-Correlator for Sub-Femtosecond Synchronisation (in session "Student Poster Session")

Development and characterisation of advanced coatings for high energy physics applications (in session "Wednesday Poster Session")

Development and commissioning of a new materials irradiation station at ATLAS (in session "Thursday Poster Session")

Development and progress of the high-power solid-state amplifiers for HEPS (in session "Wednesday Poster Session")

Development and testing of quantum gas jet beam profile scanner (in session "Thursday Poster Session")

Development and Tests of a Full-Size Additive Manufactured Radio Frequency Quadrupole Module (in session "Thursday Poster Session")

Development of a 704.4 MHz CH cavity using additive manufacturing (in session "Tuesday Poster Session")

Development of a backside laser-heated toroidal electron gun using a lanthanum hexaboride emitter. (in session "Tuesday Poster Session")

Development of a combined element with an electric and magnetic fields for the JEDI experiment (in session "Thursday Poster Session")

Development of a compact half-cell RF photocathode gun for single-shot keV ultrafast electron diffraction with femtosecond resolution (in session "Tuesday Poster Session")

Development of a GaN FETs based fully digital correction magnet power supply platform for taiwan photon source (in session "Wednesday Poster Session")

Development of a Modular X-ray Detector for Beamline Diagnostics at Los Alamos National Lab (in session "Thursday Poster Session")

Development of a new control interface for the electron gun pulser of TLS LINAC (in session "Thursday Poster Session")

Development of a new digital LLRF system for high energy photon source (in session "Thursday Poster Session")

Development of a New Electromagnetic Extraction channel for the AGOR Cyclotron (in session "Wednesday Poster Session")

Development of a new online model application for the high-energy beam transfer lines at GSI (in session "Thursday Poster Session")

Development of a Prototype Pulsed Power Supply using SiC-MOSFETs for a Fast Kicker System in KEK-PF (in session "Thursday Poster Session")

Development of a pulse current monitoring device for the Eddy septum magnets in J-PARC main ring (in session "Tuesday Poster Session")

Development of a setup for laser-Compton backscattering at the S-DALINAC (in session "Tuesday Poster Session")

Development of a special power supply for the injector of compact X-ray source (in session "Wednesday Poster Session")

Development of a spin filter polarimeter for polarization measurement of pulsed H+/D+ ion beam at IMP (in session "Tuesday Poster Session")

Development of a Spin Filter Polarimeter for Polarization Measurement of Pulsed H+/D+ Ion Beams at IMP (in session "Student Poster Session")

Development of a Tool for Cavity Failure Compensation in Superconducting Linacs: Progress and Comparative Study (in session "Thursday Poster Session")

Development of an elliptically polarizing X-type undulator for fourth generation light sources (in session "Monday Poster Session")

Development of an ion-optical achromat for high-energy proton imaging (in session "Wednesday Poster Session")

Development of an octupole ceramics chamber with integrated pulsed magnet for beam injection (in session "Wednesday Poster Session")

Development of an S-band accelerating structure for Hefei Advanced Light Source facility (in session "Wednesday Poster Session")

Development of an ultrahigh dose rate radiation platform for X-ray FLASH radiotherapy research (in session "Tuesday Poster Session")

Development of an X-band RF gun with four-feed coupler (in session "Monday Poster Session")

Development of beam position monitor for korea 4GSR project (in session "Thursday Poster Session")

Development of bent crystal manipulation systems for beam collimation and extraction at CERN (in session "Monday Poster Session")

Development of build-up optical cavity for broad-band THz pulse train (in session "Tuesday Poster Session")

Development of cold atom electron source in KEK (in session "Tuesday Poster Session")

Development of EPICS-based data acquisition system for beam loss monitor and sX-Map (in session "Thursday Poster Session")

Development of fast BBA for Diamond Light Source (in session "Monday Poster Session")

Development of Hall probe system for accurate field mapping at NSRRC (in session "Wednesday Poster Session")

Development of He2+ 10GHz ECR ion source for astatine generation accelerator (in session "Tuesday Poster Session")

Development of He2+ 10GHz ECR Ion Source for astatine generation accelerator (in session "Student Poster Session")

Development of Low Energy Branch at Micro Analytical Centre, Ljubljana, Slovenia (in session "Student Poster Session")

Development of Low Energy Branch at Micro Analytical Centre, Ljubljana, Slovenia (in session "Thursday Poster Session")

Development of low energy SuperConducting Linac (SCL3) control system for RAON (in session "Thursday Poster Session")

Development of low-dose proton irradiation test bench using beam window (in session "Thursday Poster Session")

Development of Nanosecond Pulser for The Southern Advanced Photon Source Injection System (in session "Monday Poster Session")

Development of new synchronized data system for J-PARC RCS (in session "Thursday Poster Session")

Development of Nonlinear Optics Simulation Using the Accelerator Code ACE3P (in session "Wednesday Poster Session")

DEVELOPMENT OF POLARIZED H AND D ATOMIC BEAM SOURCE AT IMP (in session "Student Poster Session")

Development of polarized H and D atomic beam source at IMP (in session "Tuesday Poster Session")

Development of reliable VHEE/FLASH passive dosimetry methods and procedures at CLEAR (in session "Thursday Poster Session")

Development of RF Fundamental Coupler for 325 MHz Superconducting Single Spoke Resonator (in session "Wednesday Poster Session")

Development of single mode cavity at 1.5 GHz for the third harmonic RF-system in PETRA IV (in session "Monday Poster Session")

Development of the diagnostic beamline for muon acceleration test with APF IH-DTL (in session "Monday Poster Session")

Development of the diagnostic beamline for muon acceleration test with APF IH-DTL (in session "Student Poster Session")

Development of the digital low level RF system for the LANSCE proton storage ring (in session "Thursday Poster Session")

Development of the first permanent bending magnet at BESSY II (in session "Wednesday Poster Session")

Development of the TATTOOS target (in session "Tuesday Poster Session")

Development of Two-Color Sub-Femtosecond Pump/Probe Techniques with X-ray Free-Electron Lasers (in session "Tuesday Poster Session")

Development progress of high-level applications for the HEPS (in session "Thursday Poster Session")

Development status and constructional features in RF HPA for ALS-U project at LBNL (in session "Wednesday Poster Session")

Developments and Characterization of a Gas Jet Ionization Imaging Optical Column (in session "Student Poster Session")

Developments and characterization of a gas jet ionization imaging optical column (in session "Thursday Poster Session")

DFCSR: A Fast Calculation of 2D/3D Coherent Synchrotron Radiation in Relativistic Beams (in session "Wednesday Poster Session")

Diagnostic Suite for High Power Electron Beams (in session "Thursday Poster Session")

Diagnostics beamline development for ALS-U (in session "Thursday Poster Session")

Dielectric Assist Accelerating structures for compact linear accelerators of low energy particles in hadrontherapy treatments (in session "Wednesday Poster Session")

Dielectric laser acceleration for dark sector studies (in session "MC03.2 - Novel Particle Sources and Acceleration Techniques (Contributed)")

Dielectric laser acceleration for dark sector studies (in session "Student Poster Session")

Differentiable beam optics optimization and measurement (in session "Wednesday Poster Session")

Differential equation model of tune ripple effect on beam spill ripple in RFKO slow extraction (in session "Tuesday Poster Session")

Digital LLRF feedbacks development, implementation and test at KEK LUCX facility (in session "Thursday Poster Session")

Dipole quadrupole magnet design for Korea-4GSR (in session "Wednesday Poster Session")

Direct RF sampling processor for cavity BPM system (in session "Thursday Poster Session")

Dispersion relations for a cylindrical waveguide with multilayer walls (in session "Wednesday Poster Session")

Distributed coupling linac for efficient acceleration of high charge electron bunches (in session "Tuesday Poster Session")

DLLRF for the active harmonic RF system of ALBA-II (in session "Thursday Poster Session")

Dose calibration and spot-size reconstruction using self-developing x-ray films in a linear induction accelerator-produced flash x-ray source (in session "Tuesday Poster Session")

Dose rate and accumulated dose around the Taiwan Photon Source in various scenarios (in session "Thursday Poster Session")

Dose Simulation of Ultra-High Energy Electron Beams for Novel FLASH Radiation Therapy Applications (in session "Thursday Poster Session")

Dosimetry and first radiobiological assay of multi-Gy, multi-MeV TNSA proton beam with ultrahigh dose-rate (in session "Tuesday Poster Session")

Double achromat solution with a dedicated collimation system for the MEBT-3 section of MYRRHA (in session "Monday Poster Session")

Driver-witness configuration in CNT array-based acceleration (in session "Tuesday Poster Session")

Driver-Witness Configuration in CNT Array-Based Acceleration (in session "Student Poster Session")

Dual-scattering foil installation at CLEAR (in session "Thursday Poster Session")

Dual-Scattering Foil Installation at CLEAR (in session "Student Poster Session")

Dynamic aperture evaluation for the EIC Hadron storage ring with two interaction regions (in session "Monday Poster Session")

Dynamic aperture predictions with echo state networks (in session "Wednesday Poster Session")

Dynamic aperture studies for the EIC electron storage ring (in session "Monday Poster Session")

Dynamic aperture studies for the first run of High Luminosity LHC (in session "Wednesday Poster Session")

Dynamic Aperture Studies for Vertical Fixed Field Accelerators (in session "Student Poster Session")

Dynamic aperture studies for vertical fixed field accelerators (in session "Tuesday Poster Session")

Dynamics of off-axis injection near the coupling resonance at PETRA IV (in session "Monday Poster Session")

DYVACS (DYnamic VACuum Simulation) code: gas density profiles for dynamic conditions in particle accelerators - simulations for the LHC and the FCCee (in session "Thursday Poster Session")

EARLI: design of a laser wakefield accelerator for AWAKE (in session "Tuesday Poster Session")

Earthquake measurements and those analysis on ir components and Belle II detector in KEK (in session "Monday Poster Session")

ECR ion source with high temperature superconducting REBCO coils (in session "Tuesday Poster Session")

ECR Ion Source with High Temperature Superconducting REBCO Coils (in session "Student Poster Session")

Effect of a silicon dioxide diffusion barrier layer on the migration of strontium implanted into SiC (in session "Thursday Poster Session")

Effect of electron orbit ripple on proton emittance growth in EIC (in session "Monday Poster Session")

Effect of oxygen and other impurities on copper coating conductivity at cryogenic temperatures (in session "Thursday Poster Session")

Effect of SCU long range errors on the FEL performance (in session "Monday Poster Session")

Effects of bulk material properties on RF surface resistivity (in session "Tuesday Poster Session")

Efficient computation of two-dimensional coherent synchrotron radiation with neural networks (in session "Wednesday Poster Session")

Efficient RF components of solid-state amplifiers for Sirius storage ring's RF plant (in session "Wednesday Poster Session")

Efficient simulation of multistage plasma accelerators (in session "Tuesday Poster Session")

Efficient tuning of particle accelerator emittance via Bayesian algorithm execution and virtual objectives (in session "MC06.1 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Contributed)")

EIC cooler injector space charge benchmark (in session "Tuesday Poster Session")

EIC crab cavity LLRF specifications (in session "Wednesday Poster Session")

EIC crab cavity multipole effects on dynamic aperture (in session "Monday Poster Session")

Electrodeposition of copper on Niobium for cryocooler application (in session "Wednesday Poster Session")

Electromagnetic and beam dynamics modeling of the LANSCE coupled-cavity linac with CST studio (in session "Tuesday Poster Session")

Electromagnetic Design of 402 MHz Normal Conducting Coaxial Window for SNS Facility (in session "Thursday Poster Session")

Electromagnetic simulation of LANSCE chopper structure (in session "Monday Poster Session")

Electron Acceleration by Self Focused q-Gaussian Laser Pulse in Plasma (in session "Monday Poster Session")

Electron beam analysis and sensitivity studies for the EuPRAXIA@SPARC_LAB RF injector (in session "Tuesday Poster Session")

Electron beam qualification at ENEA Frascati particle accelerators laboratory (in session "Thursday Poster Session")

Electron beam studies on a beam position monitor based on Cherenkov diffraction radiation (in session "Thursday Poster Session")

Electron beam test facilities for novel applications (in session "MC05.1 - Beam Dynamics and Electromagnetic Fields (Invited)")

Electron beam test to the multi-stripline-based non-destructive energy spread monitor for the PAL-XFEL (in session "Thursday Poster Session")

Electron beam transport modeling in a linear induction accelerator for X-ray flash radiography (in session "Wednesday Poster Session")

Electron cloud build-up studies for FCC-ee (in session "Wednesday Poster Session")

Electron cloud measurements in Fermilab booster (in session "Wednesday Poster Session")

Electron cloud observations and mitigation for the LHC Run 3 (in session "Wednesday Poster Session")

Electron gun for sheet electron probe for beam tomography (in session "Thursday Poster Session")

Electron microbunching using amplified optical stochastic cooling (in session "Wednesday Poster Session")

Electron Microbunching using the Amplified Optical Stochastic Cooling Mechanism (in session "Student Poster Session")

Electron optics based on quadrupole multiplets for dark field imaging and diffraction with MeV electron beams (in session "Student Poster Session")

Electron optics based on quadrupole multiplets for dark field imaging and diffraction with MeV electron beams (in session "Tuesday Poster Session")

Electron polarization preservation in the EIC (in session "Monday Poster Session")

Electron Polarization Preservation in the EIC (in session "Student Poster Session")

Electron Storage Ring Collimation and Abort System design for the Electron Ion Collider (in session "Monday Poster Session")

Electron-bunch manipulation at 400GHz for compression, de-chirping, acceleration and synchronisation of femtosecond bunches. (in session "Tuesday Poster Session")

Electrostatic dust lofting: a possible cause for beam losses at CERN’s LHC (in session "Monday Poster Session")

Elettra 2.0 - the girder support design (in session "Monday Poster Session")

Elettra 2.0 eBPM: Complete System Overview (in session "Thursday Poster Session")

Elettra 2.0 – Italy’s lightsource for science and outreach (in session "Monday Plenary before coffee")

Elettra 2.0: Activities in the experimental Hall (in session "Monday Poster Session")

Elettra 2.0: Magnet Power Converters strategy (in session "Wednesday Poster Session")

Elettra 2.0: the vacuum system design for a new generation storage ring (in session "Thursday Poster Session")

Elongation of LED lighting lifetime under X-ray dominant radiation environment (in session "Thursday Poster Session")

Emittance compensation in a high charge TOPGUN photoinjector (in session "Wednesday Poster Session")

Emittance exchange with periphery cut for high-brightness beam (in session "Wednesday Poster Session")

Emittance growth study of an electron beam in a double-alpha magnet compressor used in an Inverse Compton Scattering X-ray source (in session "Tuesday Poster Session")

Emittance oscillations and self-compensation during blow-out beam generation (in session "Tuesday Poster Session")

Emittance reduction of the actual Booster for Elettra2.0 (in session "Wednesday Poster Session")

Emittance Tomography with multiple wire scanners at RAON facility (in session "Thursday Poster Session")

Emittance tuning bumps for the main linac of CLIC 380 GeV (in session "Thursday Poster Session")

Employing octupole magnets for nonlinear optimization of Iranian Light Source Facility storage ring (in session "Wednesday Poster Session")

Employing octupole magnets for nonlinear optimization of Iranian Light Source Facility storage ring (in session "Student Poster Session")

Energy deposition challenges for the HL-LHC beam dump (in session "Monday Poster Session")

Energy deposition simulations for a damage experiment with superconducting sample coils (in session "Wednesday Poster Session")

Energy saving magnets for beam lines (in session "Thursday Poster Session")

Energy saving measures in the high-power RF system of the European XFEL (in session "Tuesday Poster Session")

Engineering, Manufacturing and Validation of Microwave Thermionic Electron Gun for Advanced Photon Source Upgrade* (in session "Tuesday Poster Session")

Enhanced harmonic generation for high-repetition-rate soft X-ray free-electron laser (in session "Tuesday Poster Session")

Enhancing the sensitivity of the electro-optical far-field experiment for measuring CSR at KARA (in session "Thursday Poster Session")

Eom-based bunch arrival monitor development at the Argonne wakefield accelerator facility (in session "Thursday Poster Session")

Error correction for the high luminosity lattice of the CEPC (in session "Monday Poster Session")

Error study on Hefei Advanced Light Facility storage ring (in session "Wednesday Poster Session")

ESS ellyptical cryomodules field emission campaign measurements (in session "Wednesday Poster Session")

ESS spoke RF power station (400kwp@352mhz) soak testing: issues and mitigations (in session "Wednesday Poster Session")

Establishing a relativistic ultrafast electron diffraction & imaging (RUEDI) UK national facility (in session "Tuesday Poster Session")

Establishment of the new particle therapy Research Center (PARTREC) at UMCG Groningen (in session "Thursday Poster Session")

Estimated heat load and proposed cooling system in the FCC-ee Interaction region beam pipe (in session "Monday Poster Session")

Estimation of Hot S-parameters of Power Amplifiers at ESS (in session "Thursday Poster Session")

Estimation of the anode power supply current of the J-PARC MR RF system for 1.36 s cycle operation (in session "Tuesday Poster Session")

EuPRAXIA and its italian construction site (in session "MC03.1 - Novel Particle Sources and Acceleration Techniques (Invited)")

EuPRAXIA doctoral network (in session "Tuesday Poster Session")

European collaboration for the realization of ESS (in session "Friday Plenary")

EUV-FEL light source for future lithography (in session "Thursday Poster Session")

Evaluation of a compact electron preinjector using a low beta acceptance X-band accelerating structure (in session "Tuesday Poster Session")

Evaluation of a high-power target design for positron production at CEBAF (in session "Wednesday Poster Session")

Evaluation of green laser source additive manufacturing technology for accelerator applications with ultra-high vacuum requirements (in session "Thursday Poster Session")

Evaluation of low-loss alumina material for high-power RF windows (in session "Thursday Poster Session")

Evaluation of photon energy and bandwidth jitter of SASE-FEL beam using hard X-ray spectrometer at European XFEL (in session "Monday Poster Session")

Evaluation of the first version of the new RFPI system dedicated to PIP-II project accelerator (in session "Thursday Poster Session")

Evaluation of the Impact of REBCO Coated Conductors on the Resistive Wall Impedance of the FCC-hh (in session "Student Poster Session")

Evaluation of the impact of REBCO-coated conductors on the resistive wall impedance of the FCC-hh (in session "Wednesday Poster Session")

Evaluation of the in-situ photocathode handling for SRF photoinjector of SEALab (in session "Thursday Poster Session")

Expansion of the µTCA based direct sampling LLRF at MedAustron for hadron synchrotron applications (in session "Thursday Poster Session")

Experience from the US contribution to HL-LHC: Nb3Sn focusing quadrupoles and SRF crab cavities (in session "Monday Poster Session")

Experimental 4D tracking of a single electron in IOTA (in session "Wednesday Poster Session")

Experimental and simulated dark current and beam loss studies for a SRF photo-injector of an ERL injector (in session "Thursday Poster Session")

Experimental confirmation of the impedance reduction campaign in the CERN SPS (in session "MC05.2 - Beam Dynamics and Electromagnetic Fields (Contributed)")

Experimental demonstration of a straight-merger beamline (in session "Wednesday Poster Session")

Experimental design for beam motion measurements in the Crocker Nuclear Laboratory cyclotron at UC Davis (in session "Thursday Poster Session")

Experimental generation of the transversely uniform electron bunches at the CLEAR facility at CERN (in session "Tuesday Poster Session")

Experimental investigations and Simulations of Dark Current in ELBE SRF gun-II (in session "Tuesday Poster Session")

Experimental measurements on impedance and beam instability in BEPCII (in session "Monday Poster Session")

Experimental measuremnet of quadrupole beam oscillating frequency at CSNS RCS (in session "MC04.1 - Hadron Accelerators (Contributed)")

Experimental test of a new method of generation of ultrashort pulses in X-ray FELs (in session "Tuesday Poster Session")

Exploration of beamline configuration space for identifying robust quadrupole configurations (in session "Wednesday Poster Session")

Exploratory investigation into the causes of beam instabilities using Machine Learning (in session "Tuesday Poster Session")

Exploring FCC-ee optics designs with combined function magnets (in session "Monday Poster Session")

Exploring the necessary conditions for steady-state microbunching at the Metrology Light Source (in session "Monday Poster Session")

Exploring time-of-flight energy filtering possibilities for ultrafast electron single-pixel imaging (in session "Thursday Poster Session")

Extraction of high-charge state neon and krypton from the D-Pace Penning ion source test stand (in session "Tuesday Poster Session")

Extremum seeking for accelerator optimisation (in session "Monday Poster Session")

Fabrication and evaluation of the PEM for the fuel cell by irradiation graft polymerization using electron beam accelerator (in session "Tuesday Poster Session")

Fabrication and testing of corrugated waveguides for a collinear wakefield accelerator (in session "MC03.2 - Novel Particle Sources and Acceleration Techniques (Invited)")

Fabrication Processes for Low-Emittance Storage Ring Copper Vacuum Chambers (in session "Thursday Poster Session")

Fabrication progress of the prototype spoke cavity for the JAEA-ADS linac (in session "Tuesday Poster Session")

Fabrication, conditioning, installation and commissioning with the beam of the first High Gradient (HG) module for the FERMI linac upgrade (in session "MC02.1 - Photon Sources and Electron Accelerators (Contributed)")

FAIR completion of construction works, towards commissioning and first science (in session "MC07.3 - Accelerator Technology and Sustainability (Invited)")

FAIR Project Management Office as strategy and services department for a mega-project in the scientific environment (in session "Tuesday Poster Session")

FAIR SIS100 Accelerating RF System - Modeling and Analysis of the Coupled LLRF Control Loops (in session "Thursday Poster Session")

Fast kickers for bunch by bunch feedbacks at SLS 2.0 and ELETTRA (in session "Thursday Poster Session")

Fast neutron TOF facility at RAON (in session "Tuesday Poster Session")

Fast RF tracking functions (in session "Wednesday Poster Session")

FCC-ee arc half-cell: preliminary design & integration studies, with ideas for a mock-up (in session "Monday Poster Session")

Feasibility investigation of a low energy laser driven plasma injector for ELSA (in session "Tuesday Poster Session")

Feasibility of round beams in SLS 2.0 (in session "Monday Poster Session")

Feasibility study of a hard x-ray FEL oscillator at 3 GeV based on harmonic lasing and transverse gradient undulator (in session "Tuesday Poster Session")

Feasibility study of fast beam-based alignment using ac excitations in the HEPS (in session "Monday Poster Session")

Feasibility Study of the Real-time Proton Flux Monitoring System for Space Radiation Environment Test By Using a 100 MeV Proton Irradiation Facility (in session "Thursday Poster Session")

Feasibility study on multi-channel power extraction tube (in session "Tuesday Poster Session")

Feasibility verification of ultrafast FEL generation experimental scheme based on SXFEL (in session "Tuesday Poster Session")

FELICIA – A probe to survey the RHIC magnet beampipe diameter for EIC beam screen insertion (in session "Thursday Poster Session")

FERMI status and perspectives (in session "Tuesday Poster Session")

FERMI upgrade to Echo Enabled Harmonic Generation (in session "Tuesday Poster Session")

Fermilab's Muon Campus: Status, Experiments, and Future (in session "Monday Poster Session")

Few cycle radiation pulses from strongly compressed electron beams (in session "Student Poster Session")

FFA design study for a high intensity proton driver (in session "Tuesday Poster Session")

FFA magnet prototype for high intensity pulsed proton driver (in session "Tuesday Poster Session")

Field quality improvement of septum magnets for SuperKEKB injection system (in session "Monday Poster Session")

Field-adapted coordinate transformations for rotating and accelerating beams (in session "Wednesday Poster Session")

Finite element analysis for NEG coated vacuum chamber based on ANSYS Workbench (in session "Thursday Poster Session")

Finite element analysis for NEG coated vacuum chamber based on ANSYS Workbench (in session "Student Poster Session")

Finite element simulation of fast corrector magnets for Petra IV (in session "Wednesday Poster Session")

Finite element study of AC losses in the superconducting coil of the NHa C400 cyclotron (in session "Thursday Poster Session")

First anomalies exploration from data mining and machine learning at the ARRONAX cyclotron C70XP (in session "Tuesday Poster Session")

First Beam Heating Studies with the Laser Heater for FLASH2020+ (in session "Student Poster Session")

First beam heating with the laser heater for FLASH2020+ (in session "Tuesday Poster Session")

First coaxial HOM coupler prototypes and RF measurements on a copper cavity for the PERLE project (in session "Monday Poster Session")

First correction to elastic scattering of electrons for microscopy (in session "Thursday Poster Session")

First demonstration of spin-polarized electrons from gallium nitride photocathodes (in session "MC03.2 - Novel Particle Sources and Acceleration Techniques (Contributed)")

First demonstration of spin-polarized electrons from gallium nitride photocathodes (in session "Student Poster Session")

First design of a 10 TeV centre of mass energy muon collider (in session "Monday Poster Session")

First high quality DTL cavity additively manufactured from pure copper (in session "Thursday Poster Session")

First installation of the upgraded vacuum control system for ALPI accelerator (in session "Monday Poster Session")

First light at the Israeli superradiant THz free electron laser (in session "Tuesday Poster Session")

First measurement of fourth and fifth order chromaticity in the LHC (in session "Monday Poster Session")

First measurements of fourth and fifth order chromaticity in the LHC (in session "Student Poster Session")

First operational results of new real-time magnetic measurement systems for accelerator control (in session "Thursday Poster Session")

First results of automated startup and commissioning procedures at the Advanced Light Source (in session "Monday Poster Session")

First results of running the LHC with lead ions at a beam energy of 6.8 Z TeV (in session "Monday Poster Session")

First results of the multipole injection kicker in the MAX IV 1.5 GeV ring (in session "Monday Poster Session")

First simulations for the EuAPS betatron radiation source (in session "Tuesday Poster Session")

First steps of the plasma-filled undulator concept for high-quality compact FEL (in session "Tuesday Poster Session")

First studies of final focus quadrupoles vibrations of the z lattice of FCC-ee (in session "Monday Poster Session")

First test results of a short period superconducting helical undulator (in session "Monday Poster Session")

First two-bunch measurements using the electro-optical near-field monitor at KARA (in session "Thursday Poster Session")

Flash Radiotherapy with the CEPC(Circular Electron-Positron Collider) Synchrotron Radiation (in session "Thursday Poster Session")

FLASHForward: experimental progress towards an idealised plasma-based energy booster (in session "MC03.3 - Novel Particle Sources and Acceleration Techniques (Contributed)")

Flexi-Gun research and development project at BESSY II (in session "Tuesday Poster Session")

Flux expulsion and material properties of Nb explored in ~650 MHz cavities (in session "Student Poster Session")

Flux expulsion and material properties of Niobium explored in 644-650 MHz cavities (in session "Wednesday Poster Session")

Focusing of high energy electron beam using crystal lenses for applications in radiotherapy - feasibility study (in session "Thursday Poster Session")

Focusing of highly charged ion beams using Gabor-lenses (in session "Tuesday Poster Session")

Foundations of Iterative Learning Control (in session "Thursday Poster Session")

Four-rows APPLE-Knot undulator on HEPS (in session "Monday Poster Session")

Free Electron Laser online optimization method based on deep reinforcement learning (in session "Tuesday Poster Session")

Frequency pre-tuning of the 166.6 MHz hom-damped srf cavities for HEPS (in session "Wednesday Poster Session")

From CERN to industrial applications: MgB2 high temperature superconductors wire technology for energy transmission (in session "Industry Session 2")

From Talk to Targets: Gender and Beyond at CERN (in session "Equal Opportunity Session")

Fully coherent soft X-ray pulse generation based on ERL (in session "Tuesday Poster Session")

Fully Coherent Soft X-ray Pulse Generation Based on ERL (in session "Student Poster Session")

Functional Architecture of SPES Safety System (in session "Thursday Poster Session")

Further aspects of the deterministic lattice design approach for BESSY III (in session "Wednesday Poster Session")

Further investigations of TRIBs in BESSY III design MBA lattices (in session "Wednesday Poster Session")

Future ESS upgrade to medium pulse length: what are the technical challenges for the accelerator and the target? (in session "Tuesday Poster Session")

Future Los Alamos Neutron Science Center (LANSCE) Directions and Enabling R&D Studies (in session "Tuesday Poster Session")

GaAs cathode activation with Cs-K-Sb thin film (in session "Monday Poster Session")

Gamma diagnostic development for ESS cryomodule prototypes in CEA Saclay (in session "Wednesday Poster Session")

Gamma-ray-induced positron annihilation spectroscopy at UVSOR-III BL1U (in session "Monday Poster Session")

Gantry design using achromatic scaling fixed-field magnets (in session "Thursday Poster Session")

Gender and STEM: it is time to change the narrative (in session "Equal Opportunity Session")

General method of short-range wakefield calculation for corrugated structures of arbitrary shape (in session "Wednesday Poster Session")

Generalized Gradient Field Description Using the Bmad and PTC Toolkits (in session "Wednesday Poster Session")

Generalized gradient map tracking in the Siberian snakes of the AGS and RHIC (in session "Wednesday Poster Session")

Generalized longitudinal strong focusing in a storage ring for coherent EUV radiation (in session "Monday Poster Session")

Generating isolated attosecond soft x-ray free electron laser with optical beat lasers (in session "Tuesday Poster Session")

Generation and NRF application of Flat-Laser Compton Scattering gamma-ray beam in UVSOR (in session "Thursday Poster Session")

Generation of Vertical Emittance through Transverse Coupling and its Impact on the Polarization in the EIC ESR (in session "Monday Poster Session")

Girder and support system for the Iranian Light Source Facility (in session "Monday Poster Session")

GNU Radio 4.0 for real-time signal-processing and feedback applications at FAIR (in session "Thursday Poster Session")

Going global: from a spin-off company to a mature successful business. Challenges and critical success factors (in session "Industry Session 2")

Gradient descent optimization and resonance control of superconducting RF cavities (in session "Thursday Poster Session")

Green-oriented upgrade of accelerator complex at the SPring-8 campus (in session "MC02.2 - Photon Sources and Electron Accelerators (Contributed)")

GUI control system for the Mu2e electrostatic septum high voltage at Fermilab (in session "Monday Poster Session")

H11(0) end cells for a 750 MHz IH structure (in session "Tuesday Poster Session")

Haissinski distribution of electron beam in Electron-Ion Collider and its impact on the Hadron beam (in session "Monday Poster Session")

Handling the functional features of accelerator components using ISO GPS situation features (in session "Thursday Poster Session")

Handshake between European laboratories and industries for particle accelerator development (in session "Industry Session 1")

Harmonic RF cavity design for 4th Generation Synchrotron Light Sources (in session "Wednesday Poster Session")

Harmonics of 50 Hz on the beam spectrum of the Large Hadron Collider (in session "Monday Poster Session")

Head-tail mode zero instability growth rate studies in the CERN SPS (in session "Wednesday Poster Session")

Heavy ion beam characterization for radiation effects testing at CERN using Monte Carlo simulations and experimental benchmarking (in session "Thursday Poster Session")

Heavy Ion CW RFQ Test Stand Development (in session "Thursday Poster Session")

Helen: Traveling wave SRF Linear Collider Higgs factory (in session "Monday Poster Session")

Helical undulator combined with a multilayer cylindrical waveguide. (in session "Wednesday Poster Session")

Helical undulators from magnetized helices and ring sectors (in session "Student Poster Session")

Helical undulators of magnetized helices and ring sectors (in session "Tuesday Poster Session")

Hellweg improvements for 3D traveling wave linac design with beam loading (in session "Wednesday Poster Session")

High accuracy optics measurement in J-PARC MR for 1.3 MW upgrade plan (in session "Wednesday Poster Session")

High angular magnification for accessing structural information in Ultrafast Electron Diffraction (in session "Wednesday Poster Session")

High beam energy recovery simulations for space charged based collector in Neutral beam injection application (in session "Monday Poster Session")

High efficiency, 1 MW, 1 MeV accelerator for environmental applications (in session "Thursday Poster Session")

High Energy & High Luminosity Gamma Gamma Colliders (in session "Tuesday Poster Session")

High energy electron shadowgraphy diagnosing magnetic field (in session "Thursday Poster Session")

High Finesse Fabry-Perot Cavity for ThomX ICS as an X-ray Source (in session "Monday Poster Session")

High gradient hybrid halbach quadrupoles with a novel 3-Bit gradient tuning system (in session "Wednesday Poster Session")

High intensity beam operation of J-PARC RCS with minimum beam loss (in session "Tuesday Poster Session")

High Luminosity LHC optics scenarios for Run 4 (in session "Monday Poster Session")

High order mode analysis in energy recovery linac based on an energy budget model (in session "Monday Poster Session")

High Power Radiofrequency Operation of the Radiofrequency Quadrupoles in the Spallation Neutron Source (in session "Monday Poster Session")

High power test results of diode E-Gun based 4-6 MeV Accelerator Beam Centerline (ABC) (in session "Tuesday Poster Session")

High power, high frequency tetrode development with revitalization supply chain (in session "Thursday Poster Session")

High precision digital control magnet power supplies (in session "Wednesday Poster Session")

High voltage DC gun using distributed Bragg reflector super lattice GaAs photocathode for EIC polarized electron sources (in session "Tuesday Poster Session")

High voltage e-gun for LINAC (in session "Tuesday Poster Session")

High-bandwidth Electro-Optic BPMs and an optical time-stretch technique (in session "Thursday Poster Session")

High-beam current operation with a digital low-level radio frequency system (in session "MC06.3 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Invited)")

High-efficiency industrial 130 kW cw solid-state RF amplifier for 1.3 GHz (in session "Wednesday Poster Session")

High-energy beamline for delivering H- laser stripped proton beam to LANSCE experimental area (in session "Tuesday Poster Session")

High-energy single-cycle terahertz sources for compact particle accelerators and manipulators (in session "Tuesday Poster Session")

High-gain free-electron laser with orbital angular momentum seeded by an x-ray regenerative amplifier (in session "Tuesday Poster Session")

High-gradient accelerating structures for proton radiography booster linac (in session "Tuesday Poster Session")

High-oower modular GaN based power supply for MedAustron scanning magnets (in session "Wednesday Poster Session")

High-Order-Modes Damping in Superconducting Harmonic Cavity for HALF storage ring (in session "Wednesday Poster Session")

High-power and femtosecond free-electron laser pulse generation with chirped pulse amplification in EEHG (in session "Tuesday Poster Session")

High-power experiment of a C-band photocathode gun (in session "Tuesday Poster Session")

High-power tests of the compactly HOM-damped TM020-cavities for a next generation light source (in session "MC07.2 - Accelerator Technology and Sustainability (Contributed)")

High-rate radiation damage studies of materials with heavy ion beams (in session "Thursday Poster Session")

Higher-order spin depolarization analysis (in session "Wednesday Poster Session")

Highly reliable industrial solid-state RF Amplifier for synchrotron light sources (in session "Wednesday Poster Session")

HL-LHC BPM electronics development as a case study for direct digitization and integrated processing techniques in accelerator instrumentation (in session "Thursday Poster Session")

HOM dampers design for the MAX IV 100 MHz RF cavities (in session "Wednesday Poster Session")

HOM power in the EIC crab cavity system (in session "Wednesday Poster Session")

How and why setting up a company in Europe working on the particles accelerator field (in session "Industry Session 2")

HPC modelling of a high-gradient C-Band LINAC for applications including hard X-Ray FREE-Electron Lasers (in session "Tuesday Poster Session")

HPRF SSPA System for RAON SRF cavities (in session "Wednesday Poster Session")

Hybrid beamline element ML-training for surrogates in the impactX beam-dynamics code (in session "Wednesday Poster Session")

Hydrodynamic model for particle beam-driven wakefield in carbon nanotubes (in session "Tuesday Poster Session")

Hydrodynamic Model for Particle Beam-Driven Wakefield in Carbon Nanotubes (in session "Student Poster Session")

IC@MS - modular and containerized web-based alarm management system (in session "Thursday Poster Session")

Identification of magnetic field errors in synchrotrons based on deep lie map networks (in session "Thursday Poster Session")

Identification of Magnetic Field Errors in Synchrotrons based on Deep Lie Map Networks (in session "Student Poster Session")

IFAST-REX: An initiative for the mitigation of beam current fluctuations in slow extraction (in session "Tuesday Poster Session")

Imaging a high-power hollow electron beam non-invasively with a gas-jet-based beam profile monitor (in session "Thursday Poster Session")

Impact of Crab Cavity RF noise on the transverse beam profiles in the HL-LHC (in session "Wednesday Poster Session")

Impact of dipole component change on quadrupole beam-based alignment accuracy for circular accelerators (in session "Thursday Poster Session")

Impact of dipole quadrupolar errors in FCC-ee (in session "Monday Poster Session")

Impact of insertion devices on the SLS 2.0 dynamic aperture (in session "Tuesday Poster Session")

Impact of multiple beam-beam encounters on LHC absolute-luminosity calibrations by the van der Meer method (in session "Student Poster Session")

Impact of multiple beam-beam encounters on LHC absolute-luminosity calibrations by the van der Meer method (in session "Wednesday Poster Session")

Impact of slow-extracted beam by main power supply trip in J-PARC main ring (in session "Tuesday Poster Session")

Impact of Surface Cleaning on the Quantum Efficiency of Mg Photocathodes (in session "Tuesday Poster Session")

Impact of the applied drain voltage on combined solid-state power amplifier modules (in session "Wednesday Poster Session")

Impact of the insertion devices operation on the ESRF-EBS equilibrium emittance (in session "Monday Poster Session")

Impact of the neutral molecule trapping on beam lifetime and beam profile (in session "Wednesday Poster Session")

Impact of two-dimensional decoherence on the measurement of resonance driving terms (in session "Wednesday Poster Session")

Impact of Vibration to HL-LHC Performance During the FPF Facility Construction (in session "Thursday Poster Session")

Impacts of strongly curved magnetic multipoles on compact synchrotron dynamics (in session "Thursday Poster Session")

Impedance analysis of deformable RF contact bridges for high luminosity LHC (in session "Wednesday Poster Session")

Impedance characterization of the RF-shielded bellows for Sirius SRF cavities (in session "Wednesday Poster Session")

Impedance measurements of key elements in the HEPS (in session "Wednesday Poster Session")

Impedance model of the Fermilab Recycler Ring (in session "Tuesday Poster Session")

Impedance modeling for Korea’s fourth-generation storage ring (in session "Wednesday Poster Session")

Impedance-induced beam observables in the CERN Proton Synchrotron (in session "Wednesday Poster Session")

Impedance-induced beam observables in the CERN Proton Synchrotron (in session "Student Poster Session")

Implementation and performance estimation of new archive system for the TLS control system (in session "Thursday Poster Session")

Implementation of the Additive Manufacturing for metals approach: the production of the acceleration grids for DTT NBI project (in session "Tuesday Poster Session")

Implementation status of MYRRHA phase 1 (MINERVA) (in session "MC04.2 - Hadron Accelerators (Contributed)")

Improve availability of solid-state amplifier by optimizing power combiner (in session "Tuesday Poster Session")

Improved antiproton production beam at CERN (in session "Tuesday Poster Session")

Improved Local Oscillator Rear Transition Module for 704.42 MHz LLRF Control System at ESS (in session "Thursday Poster Session")

Improved measurements of nonlinear integrable optics at IOTA (in session "Wednesday Poster Session")

Improved signal detection of the steady-state microbunching experiment at the Metrology Light Source (in session "Monday Poster Session")

Improved waveforms for barrier-bucket systems (in session "Wednesday Poster Session")

Improvement of beam transport in high energy transfer lines using Gabor-lenses (in session "Tuesday Poster Session")

Improvement of extraction efficiencty of oscillator-type mid-infrared free-electron laser at Kyoto University (in session "Tuesday Poster Session")

Improvement of the longitudinal phase space tomography at the J-PARC synchrotrons (in session "Thursday Poster Session")

Improvements in longitudinal phase space tomography at PITZ (in session "Thursday Poster Session")

Improvements on the LHC Interlock BPM system (in session "Thursday Poster Session")

Improvements to the commissioning simulations of the APS Upgrade storage ring (in session "Wednesday Poster Session")

Improving the performance of the SXFEL through Proximal Policy Optimization (in session "Tuesday Poster Session")

Improving the performance of the SXFEL through Proximal Policy Optimization (in session "Student Poster Session")

Improving the phase stability of the 201.25 MHz BPPM reference for the LANSCE 805 MHz LINAC (in session "Thursday Poster Session")

In-Situ Pulse-to-Pulse Evaluation Method on Cavity Parameters of the RF Pulse Compressor (in session "Wednesday Poster Session")

Incoherent and coherent synchrotron radiation effects in the SuperKEKB electron beam transport (in session "Monday Poster Session")

Incoherent dynamics of intense proton beams under electron cooling (in session "Tuesday Poster Session")

Increased dose rate for a proton therapy eye treatment nozzle on a medical gantry system using a diamond degrader (in session "Student Poster Session")

Increased dose rate for a proton therapy eye treatment nozzle on a medical gantry system using a diamond degrader (in session "Thursday Poster Session")

Increasing equipment availability with CERN’s enterprise asset management platform (in session "Thursday Poster Session")

Increasing the flux of a Thomson source while maintaining a narrow bandwidth by using large energy spread primary particles (in session "Tuesday Poster Session")

Inferring nonlinear phase space from spectral correlations in free-electron laser radiation (in session "Tuesday Poster Session")

Influence of vibratory effects on the beam parameters of SuperKEKB (in session "Thursday Poster Session")

INFN-LASA R&D on high-Q cavities for the PIP-II project (in session "Wednesday Poster Session")

Initial application of machine learning for beam parameter optimization at the Hefei Light Source II (in session "Thursday Poster Session")

Initial experimental test of a modified ADRC algorithm for microphonics reduction (in session "Thursday Poster Session")

Initial high electric field – vacuum arc breakdown test results for additively manufactured pure copper electrodes (in session "Thursday Poster Session")

Initial results of applying an autoencoder to detect anomalies in the air conditioning systems of the Brookhaven accelerator complex (in session "Thursday Poster Session")

Injection optimization via reinforcement learning at the cooler synchrotron COSY (in session "Wednesday Poster Session")

Injector and synchrotron commissioning of helium ion beams at the MedAustron Ion Therapy Center (in session "Tuesday Poster Session")

Innovation partnership for the industrialization and production of the BPM electronics (in session "Industry Session 2")

Innovations in the Next Generation Medical Accelerators for Therapy with Ion Beams (in session "Thursday Poster Session")

Insertion device developments for Elettra 2.0 (in session "Monday Poster Session")

Insertion Region Optics Correction Strategies for FCC-ee (in session "Monday Poster Session")

Instability consideration in the presence of passive superconducting harmonic cavities (in session "Wednesday Poster Session")

Instability mitigation using octupoles in bunches with space-charge (in session "Wednesday Poster Session")

Installation and integrated testing of magnets for the ESS linac (in session "Wednesday Poster Session")

Installation of a new low energy line (LEBTO3) at CNAO (in session "Monday Poster Session")

Instrumentation and operation modes for the commissioning phase of the SEALab SRF photoinjector (in session "Thursday Poster Session")

Integrated control system for space radiation environment test based on 100 MeV proton accelerator (in session "Thursday Poster Session")

Integrating hysteresis models into the Radia software (in session "Wednesday Poster Session")

Intelligent online optimization in X-ray free-electron lasers (in session "MC06.1 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Contributed)")

Interaction region effects on the EIC’s electron storage ring's dynamic aperture (in session "Monday Poster Session")

Interactive automated Bragg peak identification with 3D neutron scattering data (in session "Thursday Poster Session")

Introduction by the Chair (in session "Industry Session 1")

Introduction by the Chair (in session "Industry Session 2")

Investigating alternative extraction methods at MedAustron (in session "Tuesday Poster Session")

Investigating the feasibility of delivering higher intensity proton beams to ECN3 at the CERN SPS North Area (in session "Monday Poster Session")

Investigation of attosecond pulse generation schemes for UK XFEL (in session "Tuesday Poster Session")

Investigation of micro spill in RF KO extraction using tailored excitation signals (in session "Tuesday Poster Session")

Investigation of multi-modes in Hard X-ray Self-seeding operation at the European XFEL (in session "Tuesday Poster Session")

Investigation of the fabrication method for the 3rd harmonic superconducting double-cell cavity (in session "Wednesday Poster Session")

Investigations into operating Pulse Picking by Resonant Excitation (PPRE) in the vertical plane (in session "Monday Poster Session")

Investigations of losses on the CERN SPS flat bottom with HL-LHC type beams (in session "Tuesday Poster Session")

Investigations on NbTi superconducting racetrack coils under pulsed-current excitations (in session "Wednesday Poster Session")

Ion acceleration by laser-matter interaction: status and perspective with the upcoming I-LUCE facility at INFN-LNS (in session "Thursday Poster Session")

Ion Beam Distribution in the FNAL LEBT (in session "Tuesday Poster Session")

Ion effects studies for Diamond-II with a simplified model (in session "Monday Poster Session")

Ion trapping and instabilities in SLS 2.0 (in session "Wednesday Poster Session")

Ionization of the muonium using the electron (in session "Tuesday Poster Session")

IOTA Proton Injector Beamline Installation (in session "Tuesday Poster Session")

IRIS - the Italian research infrastructure on Applied Superconductivity for Particle Accelerators and Societal Applications (in session "Thursday Poster Session")

Irradiation tests of a cavity core material and GaN devices in J-PARC Main Ring (in session "Wednesday Poster Session")

J-PARC operation with the high repetition rate upgrade (in session "MC04.1 - Hadron Accelerators (Invited)")

Jacobs remote leak sealing (in session "Thursday Poster Session")

Jefferson Lab’s 20A Bipolar Trim power supply for Very Low Inductance Load (in session "Wednesday Poster Session")

Jitter tolerance for the FEBE beamline on CLARA (in session "Tuesday Poster Session")

Kaon beam simulations employing conventional hadron beam concepts and the RF separation technique at the CERN M2 beamline for the future AMBER experiment (in session "Tuesday Poster Session")

Kaon beam studies employing coventional hadron beam concepts and the RF-separation technique at the CERN M2 beam line for the future AMBER experiment (in session "Student Poster Session")

KEK LUCX facility new FPGA based LLRF phase and amplitude feedback performance report (in session "Thursday Poster Session")

Korea-4GSR Lattice Update (in session "Wednesday Poster Session")

Landau damping with a transversely gaussian pulsed electron lens (in session "Wednesday Poster Session")

LANSCE accelerator machine protection/timing system interaction opportunities (in session "Thursday Poster Session")

LANSCE Accelerator Modernisation Project Studies at LANL (in session "Monday Poster Session")

LANSCE's instrumentation and controls system modernization (in session "Thursday Poster Session")

Large-aperture high-field NB3SN magnets for the 2nd EIC interaction region (in session "Wednesday Poster Session")

Laser assisted charge exchange injection into the ring at the SNS (in session "MC04.1 - Hadron Accelerators (Contributed)")

Laser cooling taken to the extreme: cold relativistic intense beams of highly-charged heavy ions (in session "MC04.1 - Hadron Accelerators (Contributed)")

Laser plasma accelerator-based soft X-ray FEL development at ELI-Beamlines (in session "Tuesday Poster Session")

Laser powder bed fusion of CuCrZr for nuclear fusion acceleration components (in session "Thursday Poster Session")

Laser powder bed fusion of pure niobium for particle accelerator applications (in session "Thursday Poster Session")

Laser source and Gabor lens for use within LhARA (in session "Tuesday Poster Session")

Laser-electron phase-locking in a steady-state microbunching storage ring (in session "Monday Poster Session")

Laser-plasma acceleration beyond the diffraction and dephasing limits (in session "MC03.1 - Novel Particle Sources and Acceleration Techniques (Invited)")

Latest lattice design and optimization for Southern Advanced Photon Source storage ring (in session "Monday Poster Session")

Latest PANTECHNIK’s ECR ion sources performances (in session "Tuesday Poster Session")

Latest updates on JSPEC – an IBS and electron cooling simulation program (in session "Tuesday Poster Session")

Lattice and detector studies for the MDI of a 10 TeV muon collider (in session "Monday Poster Session")

Lattice considerations for synchrotron of XiPAF-upgrading project (in session "Wednesday Poster Session")

Lattice design for the hadron storage ring of the Electron-Ion Collider (in session "Monday Poster Session")

Lattice design for the interaction region of the electron-ion collider (in session "Monday Poster Session")

Lattice design of 250 MeV version of Perle (in session "Tuesday Poster Session")

Lattice optimization for Electron Ion Collider Hadron storage ring injection (in session "Monday Poster Session")

Lattice options for MLS II (in session "Monday Poster Session")

Lattice-based simulations for the fast orbit feedback system of PETRA IV (in session "Thursday Poster Session")

Lattice design of the EIC electron storage ring for energies down to 5 GeV (in session "Monday Poster Session")

LCLS-II commissioning results (in session "Monday Plenary after coffee")

LhARA, the laser-hybrid accelerator for radiobiological applications (in session "Thursday Poster Session")

LHC crystal collimation tests with 6.8 Z TeV Pb beams (in session "Tuesday Poster Session")

LHC low beta quadrupole magnets: cryogenic refrigeration capacity and improved controls for luminosity optimization (in session "Wednesday Poster Session")

LHC Run 3 optics corrections (in session "Monday Poster Session")

Lifetime improvement of the CeB6 thermionic cathode at the X-ray free-electron laser facility SACLA by avoiding backward-accelerated electrons (in session "Tuesday Poster Session")

Lifetime without Compromise (in session "Monday Poster Session")

Lifetime without Compromise (in session "Student Poster Session")

Light source developments at UVSOR BL1U (in session "Monday Poster Session")

Limitations of radial magnetic field estimates from counter-rotating beams in an electro-static EDM ring (in session "Wednesday Poster Session")

Linear accelerator for a next generation rare isotope facility (in session "Tuesday Poster Session")

Linear accelerator simulation code AVAS (in session "Wednesday Poster Session")

Linear Canonical Transform Library for Fast Coherent X-Ray Wavefront Propagation (in session "Monday Poster Session")

Linear optics compensation for the HEX superconducting wiggler at NSLS-II (in session "Wednesday Poster Session")

LIPAc (linear IFMIF prototype accelerator) beam commissioning & future plans (in session "Monday Plenary after coffee")

LLRF control upgrade at BESSY-II with mTCA.4 platforms (in session "Thursday Poster Session")

Local and global betatron coupling correction based on beam position measurements in RHIC (in session "Monday Poster Session")

Logistics strategies for Elettra 2.0 (in session "Wednesday Poster Session")

Long short-term memory networks for anomaly detection in storage ring power supplies (in session "Thursday Poster Session")

Longitudinal beam dynamics and RF requirements for a chain of muon RCSs (in session "Tuesday Poster Session")

Longitudinal beam dynamics for different initial distributions at cSTART (in session "Wednesday Poster Session")

Longitudinal beam dynamics studies with a third harmonic RF system for ALBA-II (in session "Wednesday Poster Session")

Longitudinal bunch shaping and optimization of the FAST injector (in session "Tuesday Poster Session")

Longitudinal Electron Beam Characterisation at the MAX IV Linac (in session "Thursday Poster Session")

Longitudinal Feedback System for Suppression of FEL Lasing Drift at Dalian Coherent Light Source (in session "Tuesday Poster Session")

Longitudinal impedance of nonlinear kicker for Hefei advanced light facility (in session "Wednesday Poster Session")

Longitudinal injection for SAPS based on a double-frequency RF system (in session "Monday Poster Session")

Longitudinal laser shaping at the EIC cooler injector (in session "Tuesday Poster Session")

Longitudinal loss of Landau damping in the CERN super proton synchrotron at 200 GeV (in session "Wednesday Poster Session")

Longitudinal loss of Landau damping in the CERN Super Proton Synchrotron at 200 GeV (in session "Student Poster Session")

Longitudinal microwave instability with long bunches in the CERN Proton Synchrotron (in session "Wednesday Poster Session")

Longitudinal phase space mapping of low energy electron beams using an rf deflector and a bend (in session "Thursday Poster Session")

Longitudinal splitting of bunches with variable energies in synchrotron (in session "Tuesday Poster Session")

Los Alamos National Laboratory Fast Kicker Upgrade 2022 (in session "Thursday Poster Session")

Loss simulations on shielding foil slit errors (in session "Wednesday Poster Session")

Low energy nuclear cross section measurement facility at Crocker Nuclear Laboratory at the UC Davis (in session "Tuesday Poster Session")

Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication (in session "Tuesday Poster Session")

Low-Energy Muon Beam Production Studies from Tungsten Using the 400-MeV Fermilab Linac (in session "Tuesday Poster Session")

Low-level radio-frequency system integrated with feed-forward control and vector modulation (in session "Monday Poster Session")

Low-power model tests of the wide-band cavity to compensate the transient beam loading in the next generation light sources (in session "Wednesday Poster Session")

Machine impedance calculation and impedance optimization of vacuum components in SLS 2.0 (in session "Monday Poster Session")

Machine learning and Bayesian optimization for pulse shaping on a linear induction accelerator (in session "Monday Poster Session")

Machine learning applications for orbit and optics correction at the Alternating Gradient Synchrotron (in session "Thursday Poster Session")

Machine Learning based SRF cavity active resonance control (in session "Monday Poster Session")

Machine learning for combined scalar and spectral longitudinal phase space reconstruction (in session "Thursday Poster Session")

Machine learning for laser pulse shaping (in session "Thursday Poster Session")

Machine learning-based optimization of storage ring injection efficiency (in session "Wednesday Poster Session")

Machine learning-based reconstruction of electron radiation spectra (in session "Tuesday Poster Session")

Machine learning-based reconstruction of electron radiation spectra (in session "Student Poster Session")

Machine protection perspective on the restart of the large hadron collider after long shutdown 2 (in session "Monday Poster Session")

Macroparticle collisionality in PIC solver (in session "Wednesday Poster Session")

MAD-NG for final focus design (in session "Monday Poster Session")

Magnet design for the strong hadron cooler in the Electron-Ion Collider (in session "Monday Poster Session")

Magnet designs for the multi-bend achromat lattice of the Shenzhen Innovation Light Facility (in session "Monday Poster Session")

Magnet system for a 1.497 GHz injection-locked magnetron (in session "Wednesday Poster Session")

Magnet technology and design of superconducting magnets for heavy ion gantry for hadron therapy (in session "Thursday Poster Session")

Magnetic alloy core loaded 2nd harmonic cavity design and testing for CSNS-II RCS (in session "Wednesday Poster Session")

Magnetic design of the commutational magnet and quadrupoles for PERLE accelerator (in session "Monday Poster Session")

Magnetic Design of the Commutational Magnet and Quadrupoles for PERLE Accelerator (in session "Student Poster Session")

Magnetic error corrections of the storage ring for the Southern Advanced Photon Source (in session "Monday Poster Session")

Magnetic field errors and possible correction schemes in SCUs (in session "Monday Poster Session")

Magnetic field measurements and radiation simulation for a superconducting transverse-gradient undulator (in session "Wednesday Poster Session")

Magnetic field tools, a C++/Python library for magnetic field processing (in session "Wednesday Poster Session")

Magnetic lattice of PolFEL linac (in session "Monday Poster Session")

Magnetic Measurement of Tapered Gap U50 Undulator (in session "Monday Poster Session")

Magnetic measurement of the magnets with trim coils in the HEPS storage ring (in session "Monday Poster Session")

Magnetic measurement systems for Elettra 2.0 (in session "Wednesday Poster Session")

Magnetic measurements of the ALS-U magnets (in session "Wednesday Poster Session")

Magnetic-field measurements and preliminary modelling for the operation of the high-order corrector magnets for HL-LHC (in session "Wednesday Poster Session")

Magnets for a muon collider (in session "Wednesday Poster Session")

Manufacturing and Testing of the 800 MHz RFQ at KAHVE-Lab (in session "Student Poster Session")

Manufacturing and testing of the 800 MHz RFQ at KAHVELab (in session "Monday Poster Session")

Mathematica expression of Gaussian lasers with temporal or spatial chirp (in session "Monday Poster Session")

Mayo Clinic Florida Carbon and Proton Therapy Facility Design (in session "Thursday Poster Session")

Mean Transverse Energy and Degradation Measurements on a Caesium Telluride Photocathode (in session "Tuesday Poster Session")

Measurement and analysis of the intensity-dependent effects on the CSNS medium energy beam transport line (in session "Tuesday Poster Session")

Measurement and characterization of a toroidal tape wound nano-crystalline core for the 40kV Inductive adder development at CERN (in session "Thursday Poster Session")

Measurement and modelling of decapole errors in the LHC from beam-based studies (in session "Monday Poster Session")

Measurement and simulations of the energy variation-induced orbit motion in a low momentum compaction APS lattice (in session "Wednesday Poster Session")

Measurement of beam energy in the Fermilab's Linac taken at the transfer line (in session "Thursday Poster Session")

Measurement of LCLS Hard X-ray Undulator gain under CBXFEL-like conditions (in session "Tuesday Poster Session")

Measurement of the 80Se(γ,n) reaction with linearly polarized γ rays (in session "Thursday Poster Session")

Measurement of the Photoelectron Yield from the Synchrotron Radiation for the NEG-coated Tubes (in session "Thursday Poster Session")

Measurements at peak operational beam current in the SNS beam test facility (in session "Wednesday Poster Session")

Measurements of longitudinal Loss of Landau damping in the CERN Proton Synchrotron (in session "Wednesday Poster Session")

Measurements of the Variation of Extracted Beam Current of a Clinical Hitachi Proton and Carbon Synchrotrons and Implications for Particle Therapy (in session "Thursday Poster Session")

Mechanical characterization of the BPMs brazing interface for Sirius storage ring (in session "Thursday Poster Session")

Mechanical Polishing of Nb3Sn Thin-Film Cavities (in session "Wednesday Poster Session")

Mechanical Polishing of Nb3Sn Thin-Film Cavities (in session "Student Poster Session")

Megaelectron-Volt ultrafast electron microscope – the future of electron imaging (in session "MC02.1 - Photon Sources and Electron Accelerators (Contributed)")

Metallic neutral vapours diffusion in electron cyclotron resonance ion sources : fluid dynamics and particle tracing simulations (in session "Tuesday Poster Session")

Methods to Discover New Photocathode Materials using Machine Learning and Data-Driven Screening (in session "Tuesday Poster Session")

MeV-scale simulations and fabrication tests of woodpile-based waveguide for dielectric laser accelerators (in session "Tuesday Poster Session")

Microbunching gain evaluation of bunch stretcher designs (in session "Wednesday Poster Session")

Microwave driven space-charge compensation with optical diagnostics and feedback (in session "Wednesday Poster Session")

Microwave instability threshold from coherent wiggler radiation impedance in storage rings (in session "Monday Poster Session")

Mini-beta optics for the European Synchrotron Radiation Facility (in session "Wednesday Poster Session")

Mitigation of losses at injection protection devices in the CERN LHC (in session "Monday Poster Session")

Model of a dynamic orbit correction system based on neural network in CLS (in session "Wednesday Poster Session")

Model-independent determination of solenoid offsets in the Sealab Injector (in session "Wednesday Poster Session")

Modeling for the phased injector upgrade for 12 GeV CEBAF (in session "Wednesday Poster Session")

Modeling of Plasma Accelerators with the Exascale Code WarpX (in session "Tuesday Poster Session")

Modeling of standing wave RF cavities for tracking through multi-pass energy recovery linac (in session "Tuesday Poster Session")

Modeling of the amplified optical stochastic cooling experiment at IOTA (in session "Wednesday Poster Session")

Modeling optical interference effects for optimization of electron emission properties from thin film semiconductor photocathodes (in session "Tuesday Poster Session")

Modeling SuperKEKB backgrounds with the Belle II electromagnetic calorimeter (in session "Monday Poster Session")

Modelling the experimental data for long-range beam-beam wire compensators at the CERN LHC with diffusive models (in session "Wednesday Poster Session")

Modernization of the laser-optical system of the X-ray generator NESTOR (in session "Monday Poster Session")

Modernization of the NSC KIPT hard X-ray source facility (in session "Monday Poster Session")

Modification of beam transport line design for simultaneous top-up injection to PF and PF-AR (in session "Monday Poster Session")

Monochromatization Interaction Region Optics Design for Direct s-channel production at FCC-ee (in session "Monday Poster Session")

Monochromatization Interaction Region Optics Design for Direct s-channel production at FCC-ee (in session "Student Poster Session")

Motorized girder realignment test in the PETRA III storage ring (in session "Monday Poster Session")

MTCA.4-based clock and timing distribution for PETRA IV (in session "Thursday Poster Session")

Mu*star: A new paradigm for nuclear reactors (in session "Thursday Poster Session")

Multi-bunch operation mode for simultaneously serving SASE and seeding FEL beamlines (in session "Tuesday Poster Session")

Multi-color FEL generation through a chirped electron beam bunch train (in session "Tuesday Poster Session")

Multi-color operation via coherent harmonic generation in a plasma driven attosecond X-ray source (in session "Tuesday Poster Session")

Multi-megahertz induction cell driver for the next generation compact hadron therapy system (in session "Thursday Poster Session")

Multi-object optimization based on high gradient C-band photoinjector (in session "Monday Poster Session")

Multi-objective extremum seeking to control drifts in the transverse beam splitting efficiency of the multi-turn extraction at the CERN proton synchrotron (in session "Tuesday Poster Session")

Multi-objective genetic algorithm for synchrotron radiation beamline optimization (in session "Monday Poster Session")

Multi-physics simulation of quadrupole resonators in the time domain under uncertainties (in session "Wednesday Poster Session")

Multi-terawatt, sub-picosecond long-wave infrared laser for next-generation particle accelerators (in session "Thursday Poster Session")

Multibunch Instabilities with Stepped Airbag Bunches (in session "Monday Poster Session")

Multicell dielectric disk accelerating structure design and low power results (in session "Monday Poster Session")

Multipacting analysis of the SNS drift tube linac (DTL) RF vacuum window using Spark3d (in session "Wednesday Poster Session")

Multipactor studies for the FCC–ee superconducting swell cavities (in session "Wednesday Poster Session")

Multipurpose Vacuum Accident Scenarios (MuVacAS) Prototype for the IFMIF-DONES Linear Accelerator (in session "Student Poster Session")

Multipurpose Vacuum Accident Scenarios (MuVacAS) prototype for the IFMIF-DONES linear accelerator (in session "Thursday Poster Session")

Multiscale material design of robust semiconductor photocathodes under strong fields (in session "Tuesday Poster Session")

Multiturn injection design and optimization for XiPAF-upgrading synchrotron (in session "Tuesday Poster Session")

Muon background minimisation using the second achromat of the NA62-BD experiment (in session "Tuesday Poster Session")

Muon momentum distribution from radial beam measurements in the Muon g-2 Storage Ring at Fermilab (in session "Monday Poster Session")

Muonium R&D at Fermilab (in session "Tuesday Poster Session")

Mutual interaction of 2m long electron plasma ensembles with an ion beam in MeV range (in session "Tuesday Poster Session")

Nb3Sb conduction cooled SRF photogun for UEM/UED status update (in session "Wednesday Poster Session")

Nb3Sn on Cu Coating By Magnetron Sputtering From Target Synthesized via Liquid Tin Diffusion (in session "Wednesday Poster Session")

Nb3Sn superconductors with artificial pinning centers for high-field accelerator magnets (in session "Prize Session")

NEG Coating for PETRA IV: Resistivity and Sticking Probability Measurements (in session "Thursday Poster Session")

Negative electron-affinity activation procedures for GaAs photocathodes at Photo-CATCH (in session "Tuesday Poster Session")

Neural networks for ID gap orbit distortion compensation in PETRA III (in session "Wednesday Poster Session")

Neutrino generated radiation from a high energy muon collider (in session "Monday Poster Session")

New controls for white circuits power supplies for the booster synchrotron of Taiwan Light Source (in session "Thursday Poster Session")

New digital low-level rf controls based on the red pitaya STEMlab for the tls linac system (in session "Thursday Poster Session")

New event based timing system for the taiwan light source (in session "Thursday Poster Session")

New Geant4 Simulation Model of Electromagnetic Processes in Oriented Crystals and its Applications in Accelerator Physics (in session "Wednesday Poster Session")

New injection controls environment for the Taiwan Light Source (in session "Thursday Poster Session")

New pulse forming line and transmission cables for the CERN PS booster extraction and transfer kickers (in session "Thursday Poster Session")

New SiC kicker power supply for J-PARC (in session "Wednesday Poster Session")

New techniques for the LNL superconductive linac ALPI beam dynamics simulations and commissioning (in session "MC05.2 - Beam Dynamics and Electromagnetic Fields (Contributed)")

NEWGAIN project at GANIL-SPIRAL2 : design of the new heavy ion injector for the superconducting linac (in session "Tuesday Poster Session")

NICA ion collider and its acceleration complex (in session "Monday Poster Session")

Noise in intense electron bunches (in session "Tuesday Poster Session")

Non-destructive definition of emittance using the compton back-scattering and AI machine learning (in session "Thursday Poster Session")

Non-destructive spin tune measurement of polarized protons in a storage ring (in session "Monday Poster Session")

Non-Destructive Testing and Mechanical Measurements at the European Spallation Source (in session "Thursday Poster Session")

Non-invasive bunch length reconstruction in linacs (in session "Thursday Poster Session")

Non-scaling fixed-field proton accelerator with constant tunes (in session "Tuesday Poster Session")

Nonlinear coupling resonances in the EIC electron storage ring (in session "Monday Poster Session")

Nonlinear Dynamics of Scaling FFAs (in session "Wednesday Poster Session")

Nonlinear optics from hybrid dispersive orbits (in session "Wednesday Poster Session")

Nonlinearity optimization for the 125 TeV SPPC collider ring lattice (in session "Monday Poster Session")

Normal-conducting 5-cell cavities for HEPS booster RF system (in session "Monday Poster Session")

Novel diagnostics for measuring 4D beam matrix (in session "Thursday Poster Session")

Novel Fabrication Methods and Geometries of Nanoblade Cathodes (in session "Tuesday Poster Session")

Novel iron lamination for fast kicker magnets with high flux density (in session "MC07.2 - Accelerator Technology and Sustainability (Contributed)")

Novel method to produce coherent soft X-ray via external seeded schemes (in session "Tuesday Poster Session")

Novel multi-beam front end for LANSCE accelerator facility (in session "Tuesday Poster Session")

Novel source of electrons in a pyroelectric accelerator (in session "Tuesday Poster Session")

Numerical analysis on the air conditioning system of the experimental hall at TPS (in session "Monday Poster Session")

Numerical calculation of the Lorentz force detuning and the pressure sensitivity for the HL-LHC crab cavity (in session "Wednesday Poster Session")

Numerical calculation on spectral phase of undulator radiation (in session "Monday Poster Session")

Numerical design of a compact TE11-to-TM01 mode converter for THz-driven electron acceleration (in session "Wednesday Poster Session")

Numerical simulation study towards 1.3-MW beam operation at J-PARC MR (in session "Tuesday Poster Session")

Numerical Simulations of an alternating-symmetry slab-based dielectric wakefield accelerator (in session "Tuesday Poster Session")

Numerical simulations of radiation reaction using Lorentz-Abraham-Dirac formalism (in session "Wednesday Poster Session")

Numerical simulations of transverse nonlinear beam manipulations at the CERN PS (in session "Wednesday Poster Session")

Numerical studies for EuPRAXIA@SPARC_LAB plasma beam driven working point (in session "Tuesday Poster Session")

Numerical studies of electron beam dynamics for the generation of attosecond pulses at the European XFEL (in session "Tuesday Poster Session")

Numerical studies of Thomson backscattering at MESA (in session "Tuesday Poster Session")

Numerical simulation of an electron beam for magnetic bunch compressor commissioning at PITZ (in session "Tuesday Poster Session")

Observation of coherent Terahertz bursts during low-energy operation of DELTA (in session "Monday Poster Session")

Observation of beam emittance reduction due to gas sheet injection for beam profile measurement (in session "Thursday Poster Session")

Observation of sudden beam loss in SuperKEKB (in session "Monday Poster Session")

Obtaining picosecond x-ray pulses on fourth generation synchrotron light sources (in session "Monday Poster Session")

Off-energy operation of a HMBA lattice (in session "Monday Poster Session")

On positron beam dynamics an initial part of a large aperture FCC-ee capture linac (in session "Monday Poster Session")

On the Betatron radiation in cylindrically symmetric plasma-ion channels (in session "Tuesday Poster Session")

On the commissioning of the ELIMAIA plasma accelerator and the future medical application using the ELIMED beamline (in session "MC08.1 - Applications of Accelerators, Technology Transfer and Industrial Relations and Outreach (Contributed)")

On-resonance round beam experiment in the HLS-II storage ring (in session "Monday Poster Session")

Online fit of an analytical response matrix model for orbit correction and optical function measurement (in session "Thursday Poster Session")

Online optimization of SIRIUS nonlinear optics (in session "Wednesday Poster Session")

Online spatio-temporal couplings monitoring diagnostics for laser-plasma accelerator driver (in session "Thursday Poster Session")

OPAL and Future Directions Towards the Exascale Area (in session "Wednesday Poster Session")

Open-midplane gradient permanent magnet with 1.53 T peak field (in session "Wednesday Poster Session")

Opendigitizer: digitizer modernisation using openCMW and GNU radio 4.0 for FAIR (in session "Thursday Poster Session")

Operation and New Capabilities of CERN's Digital LLRF Family for Injectors (in session "Thursday Poster Session")

Operation improvements of the actual booster-injector for Elettra 2.0 (in session "Thursday Poster Session")

Operation of copper cavities at cryogenic temperatures (in session "Tuesday Poster Session")

Operation of the ESRF-EBS light source (in session "Monday Poster Session")

Operation pressure and lifetime improvement of bialkali photocathodes via graphene protection (in session "Tuesday Poster Session")

Operation the Accelerator Test Facility linac transport beamline by using Artificial Intelegence and Machine Learning Methods (in session "Thursday Poster Session")

Operational beta* levelling at the LHC in 2022 and beyond (in session "Monday Poster Session")

Operational experience of a low beam coupling impedance injection kicker magnet for the CERN SPS ring (in session "Thursday Poster Session")

Operational experiences of two CPMUs at Taiwan Photon Source (in session "Wednesday Poster Session")

Operational handling of Crystal collimation at the LHC (in session "Monday Poster Session")

Operational tests of CRYRING@ESR without electron cooler solenoid compensation (in session "Tuesday Poster Session")

Operations Overview of the Los Alamos Neutron Science Center (LANSCE) (in session "Tuesday Poster Session")

Optical optimization of Cs2Te photocathodes (in session "Tuesday Poster Session")

Optical pepper-pots: developing single-shot emittance diagnostics (in session "Thursday Poster Session")

Optical Transition Radiation Measurements of a High Intensity Low Energy Hollow Electron Beam on Electron Beam Test Facility (in session "Student Poster Session")

Optical transition radiation measurements of a high intensity low energy hollow electron beam on electron beam test facility (in session "Thursday Poster Session")

Optimisation of a gas jet-based beam profile monitor for high intensity electron beams (in session "Thursday Poster Session")

Optimisation of the stem cooling design of the normally conducting Myrrha-CH structures using the example of CH 3 (in session "Tuesday Poster Session")

Optimization and development of the CBPM system for the SHINE (in session "Thursday Poster Session")

Optimization of 200 MeV laser-plasma electron injector target using massive particle-in-cell simulation combined with fluid simulation (in session "Tuesday Poster Session")

Optimization of Echo-Enabled Harmonic Generation toward coherent soft X-ray free-electron laser in current and future synchrotron light sources (in session "Tuesday Poster Session")

Optimization of EPURE LINAC performances and time characterization using electronic/photonic focal spot size correlation (in session "Thursday Poster Session")

Optimization of klystron drive signal and HV shape to reduce energy consumption during operation of the European XFEL (in session "Tuesday Poster Session")

Optimization of low-energy slow extraction efficiency of XiPAF (in session "Tuesday Poster Session")

Optimization of mechanical robustness in the booster injection bumpers (in session "Thursday Poster Session")

Optimization of spin coherence time for electric dipole moment (EDM) measurements in a storage ring (in session "Tuesday Poster Session")

Optimization of the optical design of cavity-based x-ray lasers (in session "Tuesday Poster Session")

Optimization of the THz SASE FEL at PITZ (in session "Tuesday Poster Session")

Optimization Studies On An S-band RF Gun For MeV-Ultrafast Electron Diffraction (in session "Tuesday Poster Session")

Optimizations of a combined RFQ cooler prototype for exotic ion beams (in session "Tuesday Poster Session")

Optimizing AWAKE Run2 Simulations Using Invertible Neural Networks (in session "Tuesday Poster Session")

Optimizing coupling slot design for pi-mode structure cavity in CSNS II debuncher (in session "Tuesday Poster Session")

Optimizing Coupling Slot Design for Pi-Mode Structure Cavity in CSNS II Debuncher (in session "Student Poster Session")

Optimizing Pb beam losses at the LHCb for maximum luminosity (in session "Monday Poster Session")

Optimizing the beam intensity control by Compton back-scattering in e+/e- Future Circular Collider (in session "Monday Poster Session")

Optimizing the design tunes of the electron storage ring of the Electron-Ion Collider (in session "Monday Poster Session")

Optimizing the discovery of underlying nonlinear beam dynamics and moment evolution (in session "Student Poster Session")

Optimizing the discovery of underlying nonlinear beam dynamics and moment evolution (in session "Thursday Poster Session")

Optimizing the filling factor in high energy colliders (in session "Wednesday Poster Session")

Orbit correction studies for the MINERVA 100 MeV proton accelerator (in session "Monday Poster Session")

Orbit-response based optics corrections for FCC-ee (in session "Wednesday Poster Session")

Orbital Stability Analysis of Three Beamlines in Beam Distribution System of SHINE Facility (in session "Wednesday Poster Session")

Origins of quench in buffered chemical polished and low temperature baked SRF cavities (in session "Wednesday Poster Session")

Origins of Quench in Buffered Chemical Polished and Low Temperature Baked SRF Cavities (in session "Student Poster Session")

Outlook to future X-FELs (in session "MC02.3 - Photon Sources and Electron Accelerators (Invited)")

Overall status of the HL-LHC project (in session "MC01.1 - Colliders and other Particle Physics Accelerators (Invited)")

Overview and status of ESS RF systems (in session "MC07.3 - Accelerator Technology and Sustainability (Contributed)")

Overview of FLASHlab@PITZ: the new R&D platform for FLASH radiation therapy and radiation biology (in session "Thursday Poster Session")

Overview of material choices for HL-LHC collimators (in session "Wednesday Poster Session")

Overview of the collective effects in SLS 2.0 (in session "Monday Poster Session")

Overview of the radiation levels in the CERN accelerator complex after LS2 (in session "Thursday Poster Session")

Overview of total ionizing dose levels in the Large Hadron Collider during 2022 restart (in session "Thursday Poster Session")

Overview of transverse instabilities in the CERN Proton Synchrotron (in session "Wednesday Poster Session")

PALLAS, a laser-plasma injector test facility, development status (in session "Monday Poster Session")

Parallel prediction of beam spot with neural networks and PCA at TTX (in session "Wednesday Poster Session")

Parameter ranges for a chain of rapid cycling synchrotrons for a muon collider complex (in session "Monday Poster Session")

Particle accelerators to meet gravitational waves (in session "Monday Poster Session")

Particle Aceeleration by electrostatic standing wave generated in the superposition of two counter propagating relativistic whistler waves (in session "Tuesday Poster Session")

Path to high current 500 mA at NSLS-II (in session "Monday Poster Session")

Performance of a double-crystal setup for LHC fixed-target experiments (in session "Monday Poster Session")

Performance of the Low Energy Ion Ring at CERN with lead ions in 2022 (in session "Tuesday Poster Session")

Performance with the upgraded LHC injectors (in session "Monday Plenary before coffee")

Periodicity five lattice proposal for a cpedm prototype ring (in session "Monday Poster Session")

PERLE: a novel facility for ERL development and applications in multi-turn configuration and high-power regime (in session "MC01.2 - Colliders and other Particle Physics Accelerators (Contributed)")

Permanent helical undulators with strong fields (in session "Monday Poster Session")

Permanent magnet materials for green accelerator facilities (in session "Wednesday Poster Session")

PETRA III operation and studies in 2022 (in session "Monday Poster Session")

Phase reference line synchronization for LCLS-I and LCLS-II at SLAC (in session "Thursday Poster Session")

Phase space control of transverse resonance island buckets at CESR (in session "Wednesday Poster Session")

Phase space measurements of an electron beam using the ASU cryocooled 200 kV DC electron gun (in session "Tuesday Poster Session")

Phase Space Measurements of an Electron Beam Using The ASU Cryocooled 200 kV DC Electron Gun (in session "Student Poster Session")

Phase space painting of a self-consistent Danilov distribution in the SNS ring (in session "Tuesday Poster Session")

Phase-space reconstruction based on severe undersampling for ultrafast electron beam (in session "Thursday Poster Session")

Photocathode activities at INFN LASA (in session "Tuesday Poster Session")

Photocathode charge map measurements at ARES (in session "Tuesday Poster Session")

Photocathodes for the electron sources at FLASH and European XFEL (in session "Tuesday Poster Session")

Photoelectron spectroscopy of CsK2Sb photocathode at Synchrotron Radiation Facility using vacuum transport system (in session "Tuesday Poster Session")

Photon beam stability and XBPMs at the MAX IV storage ring light source (in session "Thursday Poster Session")

Photon diagnostics for the high-gain THz FEL at PITZ (in session "Monday Poster Session")

Photonics-Integrated Photocathodes (in session "Student Poster Session")

Photonics-Integrated Photocathodes (in session "Tuesday Poster Session")

Physical design for EEHG beamlines of S3FEL (in session "Tuesday Poster Session")

Physical Design for SASE Beamlines of S3FEL (in session "Tuesday Poster Session")

Physical design for Shenzhen superconducting soft X-Ray free-electron laser (S3FEL) (in session "Tuesday Poster Session")

Physical design of a 10 MeV electron linac for industrial application and material irradiation effect research (in session "Tuesday Poster Session")

Physics of Star Wars (in session "Outreach")

Physics-constrained 3D convolutional neural networks for electrodynamics of relativistic charged particle beams (in session "Wednesday Poster Session")

PLACET3: 6D tracking through PETS and accelerating structures wakefields (in session "Wednesday Poster Session")

PLACET3: 6D tracking through PETS’ and accelerating structures’ wakefields (in session "Student Poster Session")

PLAN - from LS2 to RUN3-LS3 and outcomes from the first RUN3-LS3 PLAN exercise (in session "Tuesday Poster Session")

Planning, installation and testing of the RF system for the upgrade of the Star facility (in session "Tuesday Poster Session")

Plasma acceleration-induced betatron radiation: a potential seed for Free Electron Lasers (in session "Tuesday Poster Session")

Plasma cleaning efforts at Fermilab (in session "Wednesday Poster Session")

Plasma cleaning of hydrocarbon and carbon contaminated surfaces of accelerator components (in session "Thursday Poster Session")

Plasma simulation and optimization of a hot surface -microwave hybrid ion sources (in session "Tuesday Poster Session")

Plasma wakefields produced by transversely asymmetric beams (in session "Tuesday Poster Session")

Plasma-accelerator-based linear beam cooling systems (in session "Tuesday Poster Session")

Polarization based out-coupling for cavity based x-ray FELs (in session "Tuesday Poster Session")

Polarized electron injector for positron production at CEBAF (in session "Wednesday Poster Session")

Polarized proton operation at RHIC with partial snakes (in session "Monday Poster Session")

Positron beams at Ce+BAF (in session "Monday Poster Session")

Post-linac beam collimation study at the beam distribution section of SHINE (in session "Wednesday Poster Session")

Potential and constraints of a beam-beam wire compensator in the HL-LHC era (in session "Wednesday Poster Session")

Power deposition studies for betatron halo losses in HL-LHC (in session "Monday Poster Session")

PRAGUE (Proton Range Measurement Using Silicon Carbide): a detector to measure online the proton beam range with laser-driven proton beams (in session "Thursday Poster Session")

Pre-experiment of 70 MeV H- cyclotron for producing ISOL RI beam (in session "Tuesday Poster Session")

Pre-study of permanent dipole magnet at NSRRC (in session "Wednesday Poster Session")

Precise control of a strong X-Y coupling beam transportation for J-PARC muon g-2/EDM experiment (in session "Monday Poster Session")

Preclinical proton minibeam radiotherapy facility for small animal irradiation (in session "Thursday Poster Session")

Predicting collective dynamics and instabilities in storage ring light sources (in session "MC05.1 - Beam Dynamics and Electromagnetic Fields (Invited)")

Prediction of superconducting magnet quenches with machine learning (in session "Wednesday Poster Session")

Predictive capabilities in CFD simulations of additively manufactured extraction grid cooling channels for the DTT NBI system (in session "Thursday Poster Session")

Preliminary design of control system for storage ring RF in Korea 4GSR (in session "Monday Poster Session")

Preliminary design of insertion devices at Hefei Advanced Light Facility (in session "Monday Poster Session")

Preliminary design of the FCC-ee vacuum chamber absorbers (in session "Monday Poster Session")

Preliminary design on the accelerator of an infrared free electron laser oscillator (in session "Tuesday Poster Session")

Preliminary electron injector design for a steady-state microbunching light source (in session "Monday Poster Session")

Preliminary lattice design for the rapid cycling synchrotron in the SPPC (in session "Monday Poster Session")

Preliminary study on THz-TBA based X-ray source (in session "Tuesday Poster Session")

Preparations for beam commissioning of the carbon RFQ at CERN (in session "Thursday Poster Session")

Present and future accelerator developments in America and their industrial needs (in session "Industry Session 1")

Present status of Kyoto University Free-Electron Laser facility, KU-FEL (in session "Tuesday Poster Session")

Prformance of laser patterned copper plasmonic photocathodes (in session "Tuesday Poster Session")

Problems and Considerations about the Injection Philosophy and Timing Structure for CEPC (in session "Monday Poster Session")

Problems and Considerations about the Injection Philosophy and Timing Structure for CEPC (in session "Student Poster Session")

Production of short-lived neutron-rich beams for hadron therapy (in session "Thursday Poster Session")

Production of slow extracted beams for CERN's East Area at the Proton Synchrotron (in session "Monday Poster Session")

Production of the 1.5 GHz fundamental power couplers for VSR demo (in session "Wednesday Poster Session")

Program Design of Timing Signal Detection and Protection for CSNS/RCS Resonant Power Supply (in session "Wednesday Poster Session")

Progress and challenges of the compact APPLE X undulator prototype at MAX IV (in session "Monday Poster Session")

Progress in Accelerator Research and Education at Korea University, Sejong (in session "Thursday Poster Session")

Progress in development and measurement of an asymmetric magnet pole undulator (in session "Wednesday Poster Session")

Progress of application and surface enhancement by Plasma Electrolytic Polishing as a new treatment for SRF substrates and accelerator components preparation (in session "Thursday Poster Session")

Progress of High Power FPC development for ERI SRF Cavities (in session "Wednesday Poster Session")

Progress of High-Efficiency L-Band IOT Design for Accelerator Applications at SLAC (in session "Wednesday Poster Session")

Progress of physics studies and commissioning preparations for the High Energy Photon Source (in session "Monday Poster Session")

Progress of the FCC-ee optics tuning working group (in session "Wednesday Poster Session")

Progress of the X-ray self-seeding monochromator at the SHINE (in session "Tuesday Poster Session")

Progress on the 6BA lattice for ALBA-II (in session "Wednesday Poster Session")

Progress on the conceptual design of the laser-hybrid accelerator for radiobiological applications (LhARA) (in session "Thursday Poster Session")

Progress on the electron ion collider’s RCS RF ramp development (in session "Monday Poster Session")

Progress on the New Booster for SOLEIL II (in session "Wednesday Poster Session")

Progress on the new high gradient C Band standing wave RF photo-gun (in session "Tuesday Poster Session")

Progress on the storage ring physics design of Hefei Advanced Light Facility (HALF) (in session "Monday Poster Session")

Progress on the TRIUMF high resolution mass separator beam commissioning (in session "Monday Poster Session")

Progress on Thor SCSI development (in session "Wednesday Poster Session")

Progress toward TURBO: a novel beam delivery system for charged particle therapy (in session "Thursday Poster Session")

Progresses and design development for the CERN ISOLDE beam dumps exchange (in session "Wednesday Poster Session")

Project management structures, processes, and tools for the HL-LHC project (in session "Tuesday Poster Session")

Project progress of LLRF for the Superconducting RF system of Hefei Advanced Light Facility (HALF) (in session "Thursday Poster Session")

Properties of superradiant spontaneous THz undulator radiation by an RF compressed electron beam (in session "Tuesday Poster Session")

Prospect of operating with limited skew quadrupole corrector availability in the LHC interaction regions (in session "Monday Poster Session")

Prospects for future facilities based on energy recovery linacs (in session "MC07.4 - Accelerator Technology and Sustainability (Invited)")

Prospects for photon science and beam dynamics studies of a THz undulator at FLUTE (in session "Tuesday Poster Session")

Protection of extraction septa during asynchronous beam dumps in HL-LHC operation (in session "Monday Poster Session")

Protection of insertion devices against radiation damage at ESRF-EBS (in session "Monday Poster Session")

Proton and electron RLA optics design (in session "Monday Poster Session")

Proton FLASH Irradiation Setup for Preclinical Studies at HZB (in session "Thursday Poster Session")

Prototype girder systems for Korea 4GSR (in session "Thursday Poster Session")

Prototyping of a disk-loaded structure for muon acceleration (in session "Monday Poster Session")

Prototyping of permanent magnet based drift tube for KOMAC 100-MeV DTL (in session "Tuesday Poster Session")

Pulsed Magnets and Power Supplies for Injection & Extraction in the SOLEIL II Project (in session "Thursday Poster Session")

Pulsed wire magnetic field measurements for an in-vacuum undulator (in session "Monday Poster Session")

Pure copper and stainless steel additive manufacturing of an IH-type linac structure (in session "Thursday Poster Session")

PyTao: the Python interface to Tao (in session "Wednesday Poster Session")

Quadrupolar multibunch detuning in the ALBA storage ring (in session "Wednesday Poster Session")

Qualitative measurements of bunch length at CLARA using coherent transition radiation (in session "Thursday Poster Session")

Quantifying effects of crab cavity RF phase noise on transverse emittance in EIC Hadron Storage Ring (in session "Tuesday Poster Session")

Quantitative availability modelling for the MYRRHA accelerator driven system (in session "Thursday Poster Session")

Quantum computing and accelerator technology (in session "MC08.2 - Applications of Accelerators, Technology Transfer and Industrial Relations and Outreach (Invited)")

Quantum efficiency and lifetime study for negative electron affinity GaAs nanopillar array photocathode (in session "Thursday Poster Session")

Quantum efficiency and lifetime study for negative electron affinity GaAs nanopillar array photocathode (in session "Student Poster Session")

Quasi-periodic Apple-knot undulator for Diamond Light Source (in session "Monday Poster Session")

R&D in superconducting RF: thin film capabilities as a game changer for future sustainability (in session "Monday Plenary after coffee")

R&D of EOTD bunch length monitor for SXFEL (in session "Thursday Poster Session")

Radiation field characterization for present LHC and future HL-LHC forward physics experiments (in session "Monday Poster Session")

Radiation levels produced by the operation of the Beam Gas Vertex monitor in the LHC tunnel at IR4 (in session "Student Poster Session")

Radiation levels produced by the operation of the Beam Gas Vertex monitor in the LHC tunnel at IR4 (in session "Thursday Poster Session")

Radiation transport line for Terahertz Coherent Diffraction Radiation at ERL Test Accelerator in KEK (in session "Tuesday Poster Session")

Radio frequency system, power converters and cryomodule installation and tests as a Polish in-kind contribution to the European Spallation Source (ESS) (in session "Monday Poster Session")

Rapid High Resolution Surface Microanalysis using Low Temperature Plasma (in session "Thursday Poster Session")

Raspberry Pi cameras as beam induced fluorescence monitors for low and high energy beams (in session "Thursday Poster Session")

Re-design of CEBAF optics for ER@CEBAF (in session "Wednesday Poster Session")

Reactivity measurements for the NSC KIPT subcritical neutron source facility (in session "Tuesday Poster Session")

Real-time Bayesian Optimization with Deep Kernel Learning and NN-Prior Mean for Accelerator Operations* (in session "Thursday Poster Session")

Realistic modeling of fully coherent light sources (in session "Tuesday Poster Session")

Realization of an Energy System-Informed Digital Twin of the KARA Accelerator at KIT in a Real-Time Simulation Environment: the ACCESS Project (in session "Thursday Poster Session")

Realization of temperature compensated TPS correction magnet power supply (in session "Wednesday Poster Session")

REBCO sample testing for a HTS high Q cavity (in session "Wednesday Poster Session")

Recent Development of Cavity Simulator for ESS (in session "Thursday Poster Session")

Recent experimental results from the dielectric wakefield acceleration program at CLARA facility (in session "MC03.2 - Novel Particle Sources and Acceleration Techniques (Contributed)")

Recent experimental results on the particle driven acceleration at the SPARC_LAB test facility (in session "Tuesday Poster Session")

Recent measurements and analyses of the beam-halo dynamics at the CERN LHC using collimator scans (in session "Wednesday Poster Session")

Recent progress at the UV to visible light-based diagnostic beam lines at MAX IV (in session "Thursday Poster Session")

Recent progress in high temperature superconductor magnet technology (in session "MC07.2 - Accelerator Technology and Sustainability (Invited)")

Recent progress of Shanghai laser electron gamma source (SLEGS) beamline in SSRF (in session "Monday Poster Session")

Recent progress of SuperKEKB project and future prospect (in session "MC01.1 - Colliders and other Particle Physics Accelerators (Contributed)")

Recent Progress of the Design and Relevant Research Activities for Southern Advanced Photon Source (in session "Monday Poster Session")

Recent progress of THz source at the SXFEL (in session "Tuesday Poster Session")

Recent status of J-PARC 3 GeV Rapid Cycling Synchrotron (in session "Tuesday Poster Session")

Recent updates of the layout of the lattice of the CERN hadron-hadron Future Circular Collider (in session "Monday Poster Session")

Recommissioning of the FLASH injector and linac (in session "Tuesday Poster Session")

Reconstructing 4D source momentum space via aperture scans (in session "Thursday Poster Session")

Reconstruction of the transverse electron beam profile using an interferometric beam size monitor (in session "Thursday Poster Session")

Recording two-beam LHC BPM signals to validate a technique for extracting individual beam positions (in session "Thursday Poster Session")

Recovery and check of the switching relay in the BPMs in the J-PARC MR (in session "Thursday Poster Session")

Reducing floor vibration of TPS experimental hall caused by air handling units (in session "Monday Poster Session")

Reinforcement Control for LEBT and RFQ of Linear Accelerators (in session "Student Poster Session")

Reinforcement control for LEBT and RFQ of linear accelerators (in session "Wednesday Poster Session")

Reinforcement learning-based beam orbit correction for the KOMAC linac (in session "Thursday Poster Session")

Relativistic beam loading and recoil effects using a covariant, retarded-potential iterator (in session "Wednesday Poster Session")

Reliability analysis of digital controller for magnet power supply based on optocoupler failure (in session "Wednesday Poster Session")

Reliability analysis of SNS SRF linac and perspective for future high-power proton SRF linacs (in session "Tuesday Poster Session")

Reliability studies for CERN’s new safe machine parameter system (in session "Thursday Poster Session")

Removal of BCP defects for the 166.6 MHz HOM-damped quarter-wave srf cavities (in session "Wednesday Poster Session")

Research and develoment of a picosecond timing system (in session "Thursday Poster Session")

Research on hydrostatic leveling system to provide elevation constraints for control network adjustment (in session "Wednesday Poster Session")

Research on hydrostatic leveling system to provide elevation constraints for control network adjustment* (in session "Student Poster Session")

Research on longitudinal dynamics and design of RF parameters of synchrotron for XiPAF-upgrading project (in session "Tuesday Poster Session")

Residual Gas Lifetime in the HEPS Storage Ring (in session "Monday Poster Session")

Resistive wall impedance of multilayer beam pipes of general cross sections (in session "Wednesday Poster Session")

Resistive-wall instability evaluation along the ramp in the SOLEIL II booster (in session "Wednesday Poster Session")

Resonant Cavity for Beam Current Diagnostics in Medical Accelerators (in session "Thursday Poster Session")

Respiratory protective equipment fit tests for researchers at the National Synchrotron Radiation Research Center (in session "Thursday Poster Session")

Results of the elliptical cryomodule qualification at the ESS TS2 (in session "Wednesday Poster Session")

Retrofit study of compressed air systems in NSRRC (in session "Thursday Poster Session")

Reverse engineering on IPHI RFQ (in session "Tuesday Poster Session")

Reverse Engineering, a key and challenging step before the integration studies for old accelerators at CERN (in session "Wednesday Poster Session")

Review of CERN beam instrumentation for fixed target experiments (in session "Thursday Poster Session")

Review of SRF technology developed for accelerators applied to searches for dark matter and other beyond the standard model physics (in session "Wednesday Poster Session")

Revision of optical klystron enhancement effects in self-amplified spontaneous emission free-electron lasers (in session "Tuesday Poster Session")

Revisit the effects of 10 Hz orbit oscillation in the relativistic heavy ion collider (in session "Monday Poster Session")

RF and beam dynamics considerations for the cavity end group of the all superconducting DESY gun (in session "Wednesday Poster Session")

RF characterisation of laser treated copper surfaces for the mitigation of electron cloud in accelerators (in session "Thursday Poster Session")

RF CM Test Program at ESS TS2 (in session "Wednesday Poster Session")

RF conditioning towards continuous wave of the RFQ of the linear IFMIF prototype accelerator (in session "Tuesday Poster Session")

RF design of a compact C-band RF pulse compressor for a VHEE linac for flash radiotherapy (in session "Wednesday Poster Session")

RF design of the pulse compression system for the klystron-based CLIC main linac (in session "Wednesday Poster Session")

RF design of the waveguide network for the klystron-based CLIC module (in session "Wednesday Poster Session")

RF feedback simulation for Diamond-II using ELEGANT (in session "Monday Poster Session")

RF kicker at the Cyrcé facility in Strasbourg (in session "Tuesday Poster Session")

RF Measurements of the 3rd Harmonic Superconducting Cavity for a Bunch Lengthening (in session "Wednesday Poster Session")

RF preparation of QWR cavities for beam commissioning (in session "Wednesday Poster Session")

RF superconducting cavity and zero-temperature physical phenomena (in session "Wednesday Poster Session")

RF system on a chip: a compact controller for SRF cavity field and detuning control (in session "Thursday Poster Session")

RF techniques for spill quality improvement in the SPS (in session "Monday Poster Session")

RF techniques for spill quality improvement in the SPS (in session "Student Poster Session")

RF Tuning for the SNS LINAC RFQ (in session "Wednesday Poster Session")

RF-acceleration studies for the HBS-linac applying alternating phase focusing concepts (in session "Tuesday Poster Session")

Robotic solutions for the remote inspection and maintenance of particle accelerators (in session "MC06.3 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Contributed)")

Robust adaptive bayesian optimization (in session "Thursday Poster Session")

Robust design of modern Chasman-Green lattices – a geometric control theory approach (in session "Wednesday Poster Session")

Role of twisted and two-color laser pulses in particle defocussing and acceleration gradients (in session "Tuesday Poster Session")

Room temperature vacuum chamber with cryogenic installations (in session "Thursday Poster Session")

Rotational invariance and IBS in circular modes (in session "Tuesday Poster Session")

Round-to-flat and flat-to-round beam transformations at the Argonne Wakefield Accelerator Facility (in session "Wednesday Poster Session")

RUEDI microscopy: solenoids or quadrupoles? (in session "Wednesday Poster Session")

Russian quadruplet based electron optics for ultrafast electron microscopy (in session "Wednesday Poster Session")

S-Band Accelerating Cells Geometry RF Measurements Technique for Pre-Tuning and Smart Combination (in session "Thursday Poster Session")

SAES experience in NEG coating of challenging vacuum chambers (in session "Thursday Poster Session")

SAFEST: a compact C-band linear accelerator for VHEE-FLASH radiotherapy (in session "Thursday Poster Session")

SARAF beam commissioning results: injector, MEBT (in session "Tuesday Poster Session")

Scaling fixed-field alternating gradient-type magnets for transportation of laser-plasma accelerator electron beams (in session "Wednesday Poster Session")

Scaling of hybrid multi bend lattice cells (in session "Monday Poster Session")

Scattered field formulation for wakefield and space charge calculations (in session "Wednesday Poster Session")

Scattered spectra from inverse Compton sources operating at high laser fields and high electron energies (in session "Tuesday Poster Session")

Scheduling tools development to manage CERN accelerators programmed stops and facilities installations (in session "Tuesday Poster Session")

Seeding studies at FLASH (in session "Tuesday Poster Session")

SEISM: 60 GHz ECR ion source for future accelerator (in session "Tuesday Poster Session")

Self consistent effects in the ponderomotive acceleration of electron beams (in session "Wednesday Poster Session")

Self-modulation and current filamentation instabilities of long and wide proton bunches in plasma (in session "Tuesday Poster Session")

Sensitivity of the optical-klystron-based high-gain harmonic generation on the electron beam energy profile (in session "Tuesday Poster Session")

Sensitivity studies of a seeded FEL operating at 2 nm (in session "Tuesday Poster Session")

Seven years statistical analysis of the Siam photon source operation (in session "Monday Poster Session")

Sextupole injection at TPS (in session "Monday Poster Session")

Sextupole optimization at rapid cycling synchrotron in China Spallation Neutron Source (in session "Monday Poster Session")

Short pulse enhancement at the Proton storage ring via double stacking for the Lujan Center at LANSCE (in session "Monday Poster Session")

Short pulsed beam extraction from Kurns FFAG (in session "Monday Poster Session")

Shunt impedance calculations for an in-vacuum undulator at Petra IV (in session "Monday Poster Session")

Simulating Beam-Beam Collisions in Linear Colliders Using Particle-in-Cell Methods (in session "Monday Poster Session")

Simulating Partially Coherent Undulator Radiation with Gaussian Random Fields (in session "Monday Poster Session")

Simulating Tilted Solenoids (in session "Monday Poster Session")

Simulation and experiment of low-energy slow extraction at XiPAF (in session "Tuesday Poster Session")

Simulation and measurement of beam loading effects in magnetic alloy RF cavity of CSNS RCS (in session "Tuesday Poster Session")

Simulation of plasmonic effects in nanostructured copper surfaces for field-assisted photoemission (in session "Tuesday Poster Session")

Simulation of shot noise effects in the EIC strong hadron cooling accelerator using real number of electrons (in session "Wednesday Poster Session")

Simulation of tapered co-propagating structures for dielectric laser accelerator (in session "Tuesday Poster Session")

Simulation of the field enhancement effect in type II superconductors for SRF applications (in session "Wednesday Poster Session")

Simulation studies for attosecond soft X-ray FEL pulse generation at PAL-XFEL (in session "Tuesday Poster Session")

Simulation studies of beam commissioning for the HEPS high-energy transfer line (in session "Thursday Poster Session")

Simulation studies of first-turn commissioning for the HEPS storage ring (in session "Monday Poster Session")

Simulation Studies of the Particle Dynamic in Beam: Internal Target and Beam-Beam Interactions in the Figure-8 Storage Ring(F8SR) (in session "Wednesday Poster Session")

Simulation studies on an XUV high-gain FEL oscillator at FLASH (in session "Tuesday Poster Session")

Simulation Studies on an XUV High-Gain FEL Oscillator at FLASH (in session "Student Poster Session")

Simulation studies on longitudinal beam dynamics manipulated by corrugated structures under different bunch length conditions at KARA (in session "Wednesday Poster Session")

Simulation studies on longitudinal beam dynamics manipulated by corrugated structures under different bunch length conditions at KARA (in session "Student Poster Session")

Simulation study of a planar dielectric-lined waveguide structure for manipulation of femtosecond high brightness electron beam in longitudinal phase space (in session "Tuesday Poster Session")

Simulation study of an adaptive feedforward control for CSNS RCS LLRF system (in session "Thursday Poster Session")

Simulation study of betatron radiation for perturbed beams in plasma (in session "Tuesday Poster Session")

Simulation study of the fringe field effects in the HEPS storage ring (in session "Monday Poster Session")

Simulation study on a virtual diagnostics concept for X-ray pulse characterisation (in session "Tuesday Poster Session")

Simulation Study on Nanosecond Laser Ion Source (in session "Tuesday Poster Session")

Simulation study on the slow extraction for the improvement of the beam spill structure at J-PARC main ring (in session "Tuesday Poster Session")

Simulation study towards a new injector LINAC for the SOLARIS synchrotron facility (in session "Tuesday Poster Session")

Simulation test of various crab dispersion closure bumps for the hadron storage ring of the Electron-Ion Collider (in session "Monday Poster Session")

Simulations and experimental studies for an X-band short-pulse ultra-high gradient photoinjector (in session "Tuesday Poster Session")

Simulations and measurements of collisional losses with Pb beams at the LHC (in session "Monday Poster Session")

Simulations of beam dynamics and beam lifetime for the prototype EDM ring (in session "Tuesday Poster Session")

Simulations of radiation reaction in inverse Compton scattering (in session "Wednesday Poster Session")

Simulations of Radiation Reaction in Inverse Compton Sources (in session "Student Poster Session")

Simulations of the compact transverse-deflecting system for ultra-short electron bunch diagnostic (in session "Thursday Poster Session")

Simultaneous Compensation of Third-Order Resonances at the FNAL Recycler Ring (in session "Wednesday Poster Session")

Single-pass X-ray Compton source based on a Superconducting Accelerator (in session "Tuesday Poster Session")

SIS18 operation and recent development (in session "Tuesday Poster Session")

Slice energy spread measurements in the european XFEL injector (in session "Tuesday Poster Session")

Slow Extraction Techniques from Fixed Field Accelerators (in session "Monday Poster Session")

Slow Extraction Techniques from Fixed Field Accelerators (in session "Student Poster Session")

Slow orbit feedback correction using extra-windings at the SAGA-LS (in session "Monday Poster Session")

Slow extraction with octupoles at CERN proton synchrotron to improve extraction efficiency (in session "Monday Poster Session")

SLS 2.0 crotch absorbers design (in session "Thursday Poster Session")

SLS 2.0 machine protection (in session "Monday Poster Session")

SLS 2.0 storage ring components overview before installation (in session "Monday Poster Session")

SLS 2.0 vacuum components design (in session "Thursday Poster Session")

Smart*Light: A high brilliance ICS X-ray Source (in session "Tuesday Poster Session")

Smart*Light: Building a compact ICS source (in session "Tuesday Poster Session")

Snowmass’21 Perspective on Future Muon Colliders (in session "Monday Poster Session")

Software architecture of FGC4, CERN’s next-generation power converter control platform (in session "Wednesday Poster Session")

SOLEIL machine status: operation and upgrade project (in session "Monday Poster Session")

Sorting of sextupole and octupole magnets in the HEPS storage ring (in session "Monday Poster Session")

Sound at the speed of light: synchrotron radiation and the study of ancient musical instruments (in session "Entertainment Session")

Space charge effects on density-modulated electron beams in drift spaces (in session "Tuesday Poster Session")

Space-charge limit in hadron synchrotrons induced by a gradient error (in session "Wednesday Poster Session")

Specifications for a new electron cooler of the antiproton decelerator at CERN (in session "Tuesday Poster Session")

SPEED: Worldwide first EEHG implementation at a storage ring (in session "Monday Poster Session")

Spin coherence and betatron chromaticity of deuteron beam in NICA storage ring (in session "Monday Poster Session")

Spin transparency experiment test in RHIC (in session "MC01.1 - Colliders and other Particle Physics Accelerators (Contributed)")

Spin-polarization simulations for the Future Circular Collider e+e- using Bmad (in session "Monday Poster Session")

Spin-polarization simulations for the Future Circular Collider e+e- using Bmad (in session "Student Poster Session")

Split 6GHz SRF thin film cavities (in session "Wednesday Poster Session")

Split-ring resonator experiments and data analysis at FLUTE (in session "Thursday Poster Session")

SPS bunch-by-bunch phase measurement in the CERn SPS low level RF (in session "Thursday Poster Session")

SPS fixed target spill quality improvements in the longitudinal plane (in session "Tuesday Poster Session")

SRF cavities for crabbing at the Electron-Ion Collider (in session "MC05.3 - Beam Dynamics and Electromagnetic Fields (Invited)")

Stabilised timing links for the CLARA test facility (in session "Thursday Poster Session")

Stability analysis of double-harmonic cavity system in heavy beam loading with its feedback loops by a mathematical method based on Pedersen model (in session "Thursday Poster Session")

Stability analysis of double-harmonic cavity system in heavy beam loading with its feedback loops by a mathematical method based on Pedersen model (in session "Student Poster Session")

Stability survey of a double RF system with RF feedback loops for bunch lengthening in a low-emittance synchrotron ring (in session "Wednesday Poster Session")

Stable spin direction measurements at RHIC with polarized proton beams (in session "Monday Poster Session")

Start to End Beam dynamics optimization for the SHINE accelerator (in session "Tuesday Poster Session")

Start-to-end simulation of the full energy linac injector for the Southern Advanced Photon Source (in session "Tuesday Poster Session")

Start-to-end tracking of therapeutic ion beams in BDSIM (in session "Thursday Poster Session")

Statistical Parameter Fluctuation of Random Processes (in session "Wednesday Poster Session")

Status and extended beam dynamics scenarios for the second injection beam line at MESA (in session "Wednesday Poster Session")

Status and first results from FACET-II towards the demonstration of plasma wakefield acceleration, coherent radiation generation, and probing strong-field QED (in session "Tuesday Poster Session")

Status and overview of the activities on ESS DTLs (in session "Monday Poster Session")

Status and plan of the European Spallation Source proton linac beam commissioning (in session "MC04.2 - Hadron Accelerators (Contributed)")

Status and plans for the high energy booster of the future electron-positron collider FCC-ee (in session "Monday Poster Session")

Status and progress of the RF system for high energy photon source (in session "Monday Poster Session")

Status and recent developments of python Accelerator Toolbox (in session "Wednesday Poster Session")

Status and upgrade of radio frequency system at Taiwan photon source (in session "Wednesday Poster Session")

Status and upgrade of the visible light diagnostics port for energy spread measurements at KARA (in session "Thursday Poster Session")

Status of 70 MeV Cyclotron at Laboratori Nazionali of Legnaro (in session "Tuesday Poster Session")

Status of a low-energy electron TRAnsverse Momentum Measurement device (TRAMM) at INFN LASA (in session "Tuesday Poster Session")

Status of CARIE facility design and construction (in session "Monday Poster Session")

Status of error correction studies in support of FFA@CEBAF (in session "Monday Poster Session")

Status of hydrodynamic simulations of a tapered plasma lens for optical matching at the ILC e+ source (in session "Monday Poster Session")

Status of MAD-X V5.09 (in session "Wednesday Poster Session")

Status of magnet systems for Korea 4GSR (in session "Wednesday Poster Session")

Status of magnets for WALS ring (in session "Wednesday Poster Session")

Status of MQXFB quadrupole magnets for HL-LHC (in session "Wednesday Poster Session")

Status of online model developments for BESSY II (in session "Thursday Poster Session")

Status of plasma diagnostics on the prototype plasma lens for optical matching at the ILC e+ source (in session "Monday Poster Session")

Status Of Plasma Diagnostics On The Prototype Plasma Lens For Optical Matching At The ILC e+ Source (in session "Student Poster Session")

Status of SIRIUS operation with users (in session "MC02.2 - Photon Sources and Electron Accelerators (Contributed)")

Status of SIS100 slow extraction design including effects of measured magnetic field errors (in session "Tuesday Poster Session")

Status of superconducting magnets for super-FRS at FAIR (in session "Wednesday Poster Session")

Status of the ALS-U accumulator ring installation (in session "Monday Poster Session")

Status of the beam-based measurement of the skew-sextupolar component of the radio frequency field of a HL-LHC-type crab-cavity (in session "Monday Poster Session")

Status of the commissioning of Beam Cooler for SPES project (in session "Tuesday Poster Session")

Status of the electron lens for space charge compensation in SIS18 (in session "Tuesday Poster Session")

Status of the ESS normal conducting linac including beam commissioning to DTL4 (in session "Tuesday Poster Session")

Status of the field mapping system design for the C400 cyclotron (in session "Thursday Poster Session")

Status of the FLUTE RF system commissioning (in session "Tuesday Poster Session")

Status of the free-electron laser user facility FLASH (in session "Tuesday Poster Session")

Status of the H- pre-injector test stand at ISIS (in session "Tuesday Poster Session")

Status of the hydrogen gas stripper at the UNILAC at GSI (in session "Monday Poster Session")

Status of the laser manipulations of H- beam at J-PARC (in session "Tuesday Poster Session")

Status of the PETRA IV electromagnets (in session "Wednesday Poster Session")

Status of the second interaction region design for Electron-Ion Collider (in session "Monday Poster Session")

Status of the seeding upgrade for FLASH2020+ project (in session "Tuesday Poster Session")

Status of the SIS100 HV injection-/extraction (in session "Thursday Poster Session")

Status of the SOLEIL II robustness studies (in session "Wednesday Poster Session")

Status of the uTCA Digital LLRF integration for SARAF Phase II (in session "Thursday Poster Session")

Status of thermomechanical studies of the SIS100 emergency beam dump system (in session "Tuesday Poster Session")

Status update on SUNADAE2 magnetic field test facility at European XFEL (in session "Monday Poster Session")

Steering to a wakefield reduced trajectory using RF kick data in the SLAC linac (in session "Monday Poster Session")

Strategies for SPIRAL2 linac heavy-ion beam tuning (in session "Tuesday Poster Session")

Strategy for proton polarization in the Electron Ion Collider (in session "Monday Poster Session")

Stripped electron collection for CSNS-II (in session "Tuesday Poster Session")

Strongly Curved Super-Conducting Magnets: Beam Optics Modeling and Field Quality (in session "Student Poster Session")

Strongly curved super-conducting magnets: beam optics modeling and field quality (in session "Wednesday Poster Session")

Strongly tapered helical undulator system for FAST-GREENS installation (in session "Monday Poster Session")

Studies and results of electrostatic devices for the SPIRAL2-DESIR project at GANIL Caen France (in session "Tuesday Poster Session")

Studies of coupled-bunch instabilities in the HEPS booster (in session "Wednesday Poster Session")

Studies of distributed optical klystron at european XFEL (in session "Tuesday Poster Session")

Studies of FCC-ee single bunch instabilities with an updated impedance model (in session "Wednesday Poster Session")

Studies of layout and cleaning performance for the FCC-ee collimation system (in session "Monday Poster Session")

Studies of radiation background at the synchrotron light source DELTA (in session "Thursday Poster Session")

Studies of the spin coherence time of protons at COSY (in session "Tuesday Poster Session")

Studies on a triple-turn energy-recovery mode at the S-DALINAC (in session "Tuesday Poster Session")

Studies on beam injection system for Wuhan Advanced Light Source storage ring (in session "Monday Poster Session")

Studies on beam instabilities in the storage ring of SAPS (in session "Monday Poster Session")

Study and optimization of an hybrid crystal-based positron source for the FCC-ee (in session "Tuesday Poster Session")

Study and simulation of cavity bunch length monitor based on monopole mode (in session "Thursday Poster Session")

Study and simulation of cryogenic bi-periodic accelerating structure with TM02 mode (in session "Monday Poster Session")

Study for space charge effect in tune space at CSNS-II/RCS (in session "Tuesday Poster Session")

Study of a bunch train total energy spread in a Linac using SLED (in session "Monday Poster Session")

Study of an ERL-based X-ray FEL (in session "Tuesday Poster Session")

Study of aperture sharing injection scheme for Diamond-II (in session "Monday Poster Session")

Study of beam evolution along the Fermilab 400 MeV linac (in session "Tuesday Poster Session")

Study of beam-beam interaction in FCC-ee including updated transverse and longitudinal impedances (in session "Wednesday Poster Session")

Study of high-intensity bunch merging and its experimental application on rapid cycling synchrotrons (in session "Wednesday Poster Session")

Study of HOM couplers for the c-band accelerating structure (in session "Tuesday Poster Session")

Study of injection schemes for the SILF storage ring (in session "Monday Poster Session")

Study of insertion devices effects in SIRIUS (in session "Monday Poster Session")

Study of LHC e-cloud instabilities using the linearised Vlasov method (in session "Wednesday Poster Session")

Study of LHC e-cloud instabilities using the linearised Vlasov method (in session "Student Poster Session")

Study of nano-structured electron sources using photoemission electron microscope (in session "Tuesday Poster Session")

Study of noise impact on AI-based ptychography for beam characterization (in session "Thursday Poster Session")

Study of NSLS-II storage ring sextupole BBA measurement (in session "Thursday Poster Session")

Study of systematic effects mimicking EDM signal combining measurements from counter-rotating beams (in session "Monday Poster Session")

Study of the active disturbance rejection control for the low level radio frequency system at the Taiwan photon source (in session "Thursday Poster Session")

Study of the beam losses and the radiation levels in the electrostatic septum for slow extraction at 8 GeV (in session "Tuesday Poster Session")

Study of the combined effect of intrabeam scattering and impedance in a low-emittance ring (in session "Wednesday Poster Session")

Study of the laser manipulation on relativistic electron beam for terahertz emission (in session "Tuesday Poster Session")

Study of the ramping process for Korea-4GSR (in session "Monday Poster Session")

Study of the systematic error contributions to the measurement of beam size using sextupole magnets (in session "Wednesday Poster Session")

Study of the transfer and matching line for a PWFA-driven FEL (in session "Tuesday Poster Session")

Study of the Transfer and Matching Line for a PWFA-driven FEL (in session "Student Poster Session")

Study of titanium coating of multipole injection kicker by magnetron sputtering method (in session "Thursday Poster Session")

Study on a self-resonating optical cavity for high-brightness Laser-Compton Scattering X-ray sources (in session "Monday Poster Session")

Study on beam orbit shift due to synchrotron radiation (in session "Thursday Poster Session")

Study on beam position measurement based on diode-detection in HLS-II (in session "Thursday Poster Session")

Study on magnets sorting for the HEPS booster (in session "Monday Poster Session")

Study on spill quality and transit times for slow extraction from SIS18 (in session "Student Poster Session")

Study on spill quality and transit times for slow extraction from SIS18 (in session "Tuesday Poster Session")

Study on Switching from H- to H+ Beam Delivery to the Proton Radiography and Ultra Cold Neutron Facilities at the Los Alamos Neutron Science Center (LANSCE) (in session "Tuesday Poster Session")

Study on the laser treatment of NB and Nb3Sn thin films on copper substrate with a kW nanosecond fiber laser (in session "Thursday Poster Session")

Study on the Laser Treatment of Nb Thin Films on Copper Substrate with a kW nanosecond fiber laser (in session "Student Poster Session")

Study on the vacuum properties of laser-etched oxygen-free copper (in session "Thursday Poster Session")

Study on the vacuum properties of laser-etched oxygen-free copper (in session "Student Poster Session")

Study on the weighting determination of leveling control network adjustment and programming (in session "Monday Poster Session")

Study on transverse beam size measurement using Cherenkov diffraction radiation in low-energy electron accelerator (in session "Thursday Poster Session")

Study on transverse multi-bunch instability in Elettra 2.0 (in session "Monday Poster Session")

Study on XiPAF-upgrading synchrotron beam loss (in session "Wednesday Poster Session")

Studying the basics of plasma physics using long range plasma (in session "Tuesday Poster Session")

Successful Al2O3 coating of superconducting niobium cavities by thermal ALD (in session "Wednesday Poster Session")

Summary of the 3rd ICFA Beam Dynamics Mini-Workshop on Machine Learning Applications for Particle Accelerators (in session "Thursday Poster Session")

Superbend magnet for Elettra 2.0 (in session "Wednesday Poster Session")

Superconducting magnets for SIS100 at FAIR – status update (in session "Wednesday Poster Session")

Superconducting multipole triplet field measurements (in session "Thursday Poster Session")

Superconducting RF systems for the SEALab facility, status and commissioning (in session "Monday Poster Session")

Superconducting undulators for future light sources (in session "MC02.1 - Photon Sources and Electron Accelerators (Invited)")

SuperKEKB Personnel Protection System (in session "Thursday Poster Session")

Suppression of microbunching instability based on optimized velocity bunching in linac-driven FELs (in session "Wednesday Poster Session")

Surface characterization of mid-T heat treated Nb samples to investigate the origin of residual resistance (in session "Wednesday Poster Session")

Surface treatment experience of the all superconducting gun cavities (in session "Wednesday Poster Session")

Surrogate Model Development for a Photoinjector (in session "Tuesday Poster Session")

Surrogate Model for Linear Accelerator: A fast Neural Network approximation of ThomX's simulator (in session "Thursday Poster Session")

Sustainability in storage ring based light sources (in session "MC07.3 - Accelerator Technology and Sustainability (Contributed)")

Sustainability studies for future linear colliders (in session "MC01.1 - Colliders and other Particle Physics Accelerators (Contributed)")

SWELL 1.3 GHz Cavity fabrication approach and machining (in session "Thursday Poster Session")

Swift Heavy Ions Induced Structural Modifications in Tungsten Carbide (WC) Thin Films (in session "Student Poster Session")

Swift Heavy Ions Induced Structural Modifications in Tungsten Carbide (WC) Thin Films (in session "Thursday Poster Session")

Symplectic neural surrogate models for beam dynamics (in session "Wednesday Poster Session")

Synchronization and phase locking of resonant magnet power supplies for Mu2e experiment at Fermilab (in session "Thursday Poster Session")

Synchronizing the timing of the electron and Hadron storage rings in the Electron-Ion Collider (in session "Monday Poster Session")

Synchrotron radiation properties of elliptically polarized undulator with a transverse field gradient (in session "Wednesday Poster Session")

Synchrotron radiation simulations for the development of a coherent synchrotron radiation bunch length monitor (in session "Thursday Poster Session")

Systematic study of longitudinal excitations to influence the microbunching instability at KARA (in session "Wednesday Poster Session")

Tailoring transverse beam characteristics with the new CERN PS booster charge-exchange injection system (in session "Tuesday Poster Session")

Taper-enhanced high-brightness SASE for stable temporally coherent HXR FEL pulses (in session "Tuesday Poster Session")

Target Optimization Studies for Future High-Intensity Facilities (in session "Tuesday Poster Session")

Target systems design for a high intensity facility in the CERN's ECN3 area (in session "Wednesday Poster Session")

TDR baseline lattice for SOLEIL II upgrade project (in session "Monday Poster Session")

Techniques for fabrication of crystalline undulators as an innovative intense source of 𝛾-rays (in session "Monday Poster Session")

Techniques to seed the self-modulation instability of a long proton bunch in plasma (in session "Tuesday Poster Session")

Technological features and status of the new heavy ions synchrotron SIS100 at FAIR (in session "Monday Poster Session")

Temperature stability in CrYogenic Brightness-Optimized Radiofrequency Gun (CYBORG) (in session "Tuesday Poster Session")

Terahertz radiation and Joule heating of corrugated structure at SHINE facility (in session "Tuesday Poster Session")

Terahertz Time Stamping Tool Development for SLAC MeV-UED (in session "Tuesday Poster Session")

Terawatt hard X-ray pulses using a single current spike and self-seeded FEL (in session "Tuesday Poster Session")

Test facility supporting modernization of the LANSCE front end (in session "Tuesday Poster Session")

Test Lab Klystron-Modulator System for RF Components Performance Test of PLS-II Linac (in session "Monday Poster Session")

Test of a DC-photogun Injector for the Lighthouse facility (in session "Tuesday Poster Session")

Test stand for conditioning high power tetrodes at TRIUMF (in session "Wednesday Poster Session")

Testing of a fan-out kicker to protect collimators from low-emittance whole-beam aborts in the Advanced Photon Source storage ring (in session "Monday Poster Session")

Testing of a ZEPTO tuneable permanent magnet quadrupole at Diamond Light Source (in session "Wednesday Poster Session")

TeV/m acceleration in laser-graphene interactions (in session "Tuesday Poster Session")

The acceleration in the system with overlapping resonances (in session "Tuesday Poster Session")

The adiabatic theory of the nonlinear coupling resonance crossing in circular accelerators (in session "Wednesday Poster Session")

The beam commissioning of 10mA, 100 kW CW proton beam at CAFe (in session "MC04.2 - Hadron Accelerators (Contributed)")

The C70XP injection line transverse distribution study and impact (in session "Tuesday Poster Session")

The canonical formulation of Lagrangian for beam-wave interaction in slow wave structure (in session "Wednesday Poster Session")

The cavity-based XFEL proposal at SHINE: (in session "Tuesday Poster Session")

The CERN SPS Low Level RF feedback with amplitude and frequency modulation (in session "Thursday Poster Session")

The CERN SPS Low Level RF: embedded acquisition system for the Cavity-Controller and Beam-Control commissioning and diagnostics (in session "Thursday Poster Session")

The CLEAR user facility: a review of the experimental methods and future plans (in session "Monday Poster Session")

The CMS Enfourneur n.2: a Huge, Lean, and Safe Machine for LS3 ECAL Upgrade (in session "Wednesday Poster Session")

The Collaborative Effects of Intrinsic and Extrinsic Impurities in Low RRR SRF Cavities (in session "Student Poster Session")

The collaborative effects of intrinsic and extrinsic impurities in low RRR SRF cavities (in session "Wednesday Poster Session")

The consolidation of the interlock systems for the CERN North Area (in session "Thursday Poster Session")

The Cool Copper Collider (C3) concept for a Higgs factory (in session "MC01.2 - Colliders and other Particle Physics Accelerators (Invited)")

The design of DC power bus bar for solid state power amplifier in NSRRC (in session "Wednesday Poster Session")

The Design of the Electron and Positron Source for CERN External Beam Lines (in session "Tuesday Poster Session")

The Design of the Emittance Diagnostic for the Scorpius Accelerator (in session "Thursday Poster Session")

The design progress of a high charge, low energy spread polarized pre injector for electron ion collider (in session "Monday Poster Session")

The development of aggregation diagrams for high-level planning at the ESS (in session "Tuesday Poster Session")

The Double Drift Harmonic Buncher (DDHB) and Acceptance Investigations at Linac and Cyclotron Injections (in session "Student Poster Session")

The double drift harmonic buncher (DDHB) and acceptance investigations at linac and cyclotron injections (in session "Tuesday Poster Session")

The effect of insertion devices on beam dynamics for Elettra 2.0 (in session "Wednesday Poster Session")

The effect of small bends in thin non-evaporable getter coated tubes on the partial pressure ratio as a function of sticking probability (in session "Thursday Poster Session")

The effect of spin oscillations in a ring with a quasi-frozen spin and its influence on the procedure for searching for the deuteron EDM (in session "Monday Poster Session")

The EPAC electron transport beamline - physics considerations and design (in session "Tuesday Poster Session")

The ESSvSB+ project (in session "Monday Poster Session")

The Frascati DAFNE LINAC low level radio frequency status (in session "Thursday Poster Session")

The Frascati DAFNE LINAC modulator upgrade (in session "Monday Poster Session")

The high luminosity Large Hadron Collider project: from project to reality at CERN (in session "Wednesday Poster Session")

The high voltage DC gun design progress for EIC strong hadron cooling (in session "Tuesday Poster Session")

The high-power test of CW 250 kW fundamental power couplers for HEPS 166.6 MHz superconducting quarter-wave beta=1 cavity (in session "Monday Poster Session")

The IFMIF RFQ as a resonant combiner: equivalent circuit and operational scenarios (in session "Monday Poster Session")

The IFMIF-DONES facility: a fusion-oriented 5 MW superconducting CW linear accelerator (in session "MC04.2 - Hadron Accelerators (Invited)")

The impact of magnetic errors on the electron ion collider rapid cycling synchrotron (in session "Wednesday Poster Session")

The impact of the resistive-wall impedance on the ILSF storage ring (in session "Wednesday Poster Session")

The investigation of cavity frequency instability induced by vibrations (in session "Monday Poster Session")

The ionization profile monitors in the recycler ring (in session "Thursday Poster Session")

The leakage field of the new high-field septum magnets for fast extraction in Main Ring of J-PARC (in session "Tuesday Poster Session")

The LHC run 2022 (in session "Monday Poster Session")

The MAX-IV linac with variable bunch compressors (in session "Wednesday Poster Session")

The mechanism of non-uniform distribution of tin sites on the surface of niobium (in session "Student Poster Session")

The mechanism of non-uniform distribution of tin sites on the surface of niobium during the nucleation process (in session "Wednesday Poster Session")

The need for Nb3Sn coated Cu cavities for future accelerators (in session "MC01.2 - Colliders and other Particle Physics Accelerators (Contributed)")

The new Elettra 2.0 magnets (in session "Monday Poster Session")

The New Intense Heavy Ion Alvarez 2.0 DTL at GSI (in session "Monday Poster Session")

The new proton beam delivery line of the TOP-IMPLART accelerator (in session "Tuesday Poster Session")

The Optical Stochastic Cooling Program at Fermilab (in session "Wednesday Poster Session")

The optimization of the bronze-method Nb3Sn coatings on Cu substrates (in session "Wednesday Poster Session")

The Personnel Access System for FAIR (in session "Thursday Poster Session")

The phase averaging scheme for phase reference line of CiADS SC Linac (in session "Thursday Poster Session")

The potential contribution of a structured laser beam to accelerator alignment technology (in session "Thursday Poster Session")

The RAON integrated control system (in session "Wednesday Poster Session")

The record of RF transmitter power supply module maintenance in NSRRC (in session "Wednesday Poster Session")

The results of the NSC KIPT subcritical assembly neutron source facility physical start up (in session "Tuesday Poster Session")

The SARAF-linac project status (in session "Tuesday Poster Session")

The Scorpius Linear Induction Accelerator (in session "Monday Poster Session")

The short model program of Nb3Sn quadrupoles for the HiLumi LHC and its potential (in session "MC07.2 - Accelerator Technology and Sustainability (Invited)")

The SPES target ion source automated storage system (in session "Thursday Poster Session")

The status of the energy calibration, polarization and monochromatization of the FCC-ee (in session "Monday Poster Session")

The status of the impedance model for the HALF storage ring. (in session "Wednesday Poster Session")

The status of the Interaction region design and machine detector interface of the FCC-ee (in session "Monday Poster Session")

The ThomX diagnostics in the machine commissioning phase (in session "Thursday Poster Session")

The Transverse Energy and Momentum Analyser system (in session "Tuesday Poster Session")

The Upgrade of Pulsed Magnet Control System Using PXIe Devices at KEK LINAC (in session "Thursday Poster Session")

The use of beam instrumentation for real time FLASH dosimetry: experimental studies in the CLEAR facility (in session "Student Poster Session")

Theoretical investigation of real supply current distributions for metallic field emission (in session "Tuesday Poster Session")

Theoretical studies on polarization control of segmental undulator system (in session "Monday Poster Session")

Thermal and deformation analysis of a 750 MHz IH-DTL prototype for medical applications (in session "Tuesday Poster Session")

Thermal and mechanical analyses on a vacuum chamber in a compact superconducting undulator with HTS tapes (in session "Wednesday Poster Session")

Thermal and structural analyses of a VHF gun at Tsinghua University (in session "Tuesday Poster Session")

Thermal Load Analysis and Benchmark Study for Beamline of Low Emittance Storage Ring (in session "Monday Poster Session")

Thermal mechanical simulations of a new germanium detector developed in the European project LEAPS-INNOV for X-ray spectroscopy applications at synchrotron facilities (in session "Thursday Poster Session")

Thermionic Sources for electron cooling at IOTA (in session "Student Poster Session")

Thermionic sources for electron cooling at IOTA (in session "Monday Poster Session")

Thermodynamic characteristics of hydrogen in an ionization cooling channel for muon colliders (in session "Monday Poster Session")

Thermodynamic study of ultrafast laser-field emission at nanostructured cathodes (in session "Tuesday Poster Session")

Thin films for the mitigation of electron multipacting (in session "Thursday Poster Session")

Thin films on HOM antennas to push the limits for higher beam currents at MESA (in session "Wednesday Poster Session")

Three-Stage Simulation for the Development of an Ion-Acoustic Dose-Deposition Mapping System for LhARA (in session "Student Poster Session")

Three-stage simulation for the development of an ion-acoustic dose-deposition mapping system for LhARA (in session "Thursday Poster Session")

THz SASE FEL at PITZ: lasing at a wavelength of 100µm (in session "Prize Session")

THz Undulator Source and Radiation Transport Through an Iris Line for Pump-Probe Experiments at FELs (in session "Tuesday Poster Session")

Time resolved measurements of DARHT-II multi-pulse beam (in session "Thursday Poster Session")

Time-drift aware RF optimization with machine learning techniques (in session "MC06.1 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Contributed)")

Time-resolved measurement and simulation of a longitudinal single-bunch instability at the MAX IV 3 GeV ring (in session "Wednesday Poster Session")

Timepix and Medipix detectors and their applications (in session "MC06.4 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Invited)")

TLS orbit feedback upgrade (in session "Thursday Poster Session")

Tolerance analysis of a bunch arrival-time monitor design with rod-shaped pickups on a printed circuit board for the European XFEL and FELBE (in session "Thursday Poster Session")

Tools for integrated simulation of collimation processes in Xsuite (in session "Wednesday Poster Session")

Toward a new era of spin-polarized electron beams at SuperKEKB (in session "Monday Poster Session")

Towards a true diffraction limited light source (in session "MC02.2 - Photon Sources and Electron Accelerators (Invited)")

Towards Elettra 2.0: Beam diagnostics overview (in session "Thursday Poster Session")

Towards fiber optics-guided synchrotron radiation-based longitudinal beam diagnostics at the KARA booster synchrotron (in session "Thursday Poster Session")

Towards fully differentiable accelerator modeling (in session "Wednesday Poster Session")

Towards multiple energy extraction operation in ion beam therapy (in session "Thursday Poster Session")

Towards optics measurements with a new LEIR BPM system (in session "Tuesday Poster Session")

Towards the COXINEL seeded Free Electron Laser with a laser plasma accelerator at HZDR (in session "MC03.3 - Novel Particle Sources and Acceleration Techniques (Invited)")

Towards the sub-Ångström regime at EuXFEL: simulations and first experimental results (in session "MC02.1 - Photon Sources and Electron Accelerators (Invited)")

TPS fast orbit feedback upgrade (in session "Thursday Poster Session")

Transfer line design for EuPRAXIA@SPARC_LAB (in session "Wednesday Poster Session")

Transient beam loading and power analysis in the booster ring of CEPC (in session "Monday Poster Session")

Transient beam loading studies in view of the Elettra 2.0 upgrade project (in session "Wednesday Poster Session")

Transient beam loading study in the storage ring of CEPC (in session "Monday Poster Session")

Transition jump system of the hadron storage ring of the electron ion collider (in session "Monday Poster Session")

Transport Line for Laser-Plasma Acceleration Electron Beam (in session "Wednesday Poster Session")

Transport Line for Laser-Plasma Acceleration Electron Beam (in session "Student Poster Session")

Transport model and Monte-Carlo simulations for photoemission from thin film semiconductors under high fields (in session "Tuesday Poster Session")

Transport studies of low energy radioactive ion beams produced by photofission at ALTO-LEB (in session "Tuesday Poster Session")

Transverse beam coupling impedance studies at the CERN Proton Synchrotron Booster after the LHC Injectors Upgrade (in session "Wednesday Poster Session")

Transverse characterization of 1 MeV/n RFQ output beam at Komac (in session "Tuesday Poster Session")

Transverse coupled-bunch instability driven by the resistive wall impedance at SuperKEKB (in session "Wednesday Poster Session")

Transverse deflecting cavities for short X-ray pulses at Elettra 2.0 (in session "Monday Poster Session")

Transverse impedance and beam stability studies for the muon collider Rapid Cycling Synchrotrons (in session "Wednesday Poster Session")

Transverse impedance and beam stability studies for the muon collider ring (in session "Wednesday Poster Session")

Transverse instabilities at injection energy in the CERN-SPS: lessons learned during high intensity studies (in session "Wednesday Poster Session")

Transverse phase space tomography using machine learning at the CLARA accelerator test facility (in session "Thursday Poster Session")

Transverse Resonant Island Buckets at the SLS (in session "Monday Poster Session")

Treatment of “forever chemicals” in wastewater with electron beams (in session "MC08.1 - Applications of Accelerators, Technology Transfer and Industrial Relations and Outreach (Invited)")

TRIBs simulations for SLS 2.0 (in session "Monday Poster Session")

Tunable monochromatic gamma ray source design using Inverse Compton Scattering at Daresbury Laboratory (in session "Monday Poster Session")

Tunable Monochromatic Gamma Ray Source Design Using Inverse Compton Scattering at Daresbury Laboratory (in session "Student Poster Session")

Tune Optimization in the rapid cycling synchrotron of China Spallation Neutron Source (in session "Tuesday Poster Session")

Tuner loop based on FPGA for Petra cavity at TPS booster ring (in session "Thursday Poster Session")

Turn-by-turn beam size measurement based on spatial interferometer (in session "Thursday Poster Session")

Turn-by-turn measurements of the energy spread at negative momentum compaction factor at KARA (in session "Wednesday Poster Session")

TWAC : EIC Pathfinder Open European project on Novel dielectric acceleration (in session "Tuesday Poster Session")

Two Dimensional Transient CSR Simulation in Julia (in session "Wednesday Poster Session")

Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles (in session "MC06.2 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Invited)")

Two-photon undulator radiation (in session "Monday Poster Session")

Ultra fast reinforcement learning demonstrated at CERN AWAKE (in session "Thursday Poster Session")

Ultra Thin $Cs_3Sb$ Photocathodes With Anomalously High Quantum Efficiency (in session "Student Poster Session")

Ultra thin Cs3Sb photocathodes with anomalously high quantum efficiency (in session "Tuesday Poster Session")

Ultra-fast generator for impact ionization triggering (in session "Thursday Poster Session")

Ultra-thin film yttria enhanced gold photocathodes (in session "Monday Poster Session")

Ultrafast and ultracold electron source (in session "Tuesday Poster Session")

Ultrahigh vacuum S-band gun and advanced photocathode studies at Tsinghua University (in session "Tuesday Poster Session")

Understanding the beam quality requirement for high energy electron microscopy (in session "MC06.2 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Contributed)")

Undulators for BESSY III (in session "Monday Poster Session")

UNDUMAG - WAVE recent developments (in session "Monday Poster Session")

Update of the RF-Track particle tracking code (in session "Wednesday Poster Session")

Update on the FCC-ee positron source design studies (in session "Monday Poster Session")

Update on the High Luminosity LHC collimation performance with proton beams (in session "Monday Poster Session")

Update on the lattice design process of BESSY III: towards a baseline lattice (in session "Wednesday Poster Session")

Update on the status of the C-band high gradient program at LANL (in session "Tuesday Poster Session")

Update on the status of the uTCA Digitizer BPM design for SARAF Phase II (in session "Thursday Poster Session")

Updates of high-density temperature and X-ray mapping (in session "Wednesday Poster Session")

Updates on Accelerator Code Comparison Studies (in session "Monday Poster Session")

Updates to Diamond-II storage ring error specifications and commissioning procedures (in session "Monday Poster Session")

Upgrade of the ALPI low and medium beta RF control system (in session "Thursday Poster Session")

Upgrade of the heavy ion accelerator complex at INFN-LNL (in session "Tuesday Poster Session")

Upgrade of the medium energy dump geometry for the SPIRAL2 single bunch selector (in session "Thursday Poster Session")

Upgrade plan of the 3 MeV RFQ at KOMAC (in session "Tuesday Poster Session")

Upgrade plans and new target stations for the HZB cyclotron (in session "Thursday Poster Session")

Upgrade the impedance model in RCS of CSNS (in session "Wednesday Poster Session")

Upgrades and developments related to stable ion beams injectors at INFN-LNL (in session "Thursday Poster Session")

Upgrades of beam diagnostics for linac of Siam Photon Source (in session "Monday Poster Session")

Upgrades of High Level Applications on Shanghai Soft X-ray FEL facility (in session "Thursday Poster Session")

Upgrades of S-band Accelerating Structures and Pulse Compressors in the Electron and Positron Injector Linac of KEK (in session "Wednesday Poster Session")

Upgrades to logging and ml analytics architecture at APS (in session "Thursday Poster Session")

Upgrading magnet power supply system in J-PARC main ring (in session "Wednesday Poster Session")

Upstream Collimation in the M4 Line: Optimization, Extinction, and Mu2e Calibration (in session "Monday Poster Session")

Use of a superconducting solenoid as a matching device for the compact linear collider positron source (in session "Monday Poster Session")

User delivery experience of Hard X-ray Self-seeding at the European XFEL (in session "MC02.1 - Photon Sources and Electron Accelerators (Contributed)")

Using HiPIMS to Deposit V3Si Super Conducting Thin Films of Single Target Deposition (in session "Monday Poster Session")

Using P-Spice model for spark detection in TRIUMF's main cyclotron system (in session "MC06.3 - Beam Instrumentation, Controls, Feedback & Operational Aspects (Contributed)")

Using supervised machine learning in power converters design for particle accelerators – application to magnetic components design (in session "Wednesday Poster Session")

Using the LHeC ERL to generate high-energy photons (in session "Tuesday Poster Session")

Using TSN for accelerator control systems (in session "Thursday Poster Session")

V3Si Thin Films for SRF Applications (in session "Wednesday Poster Session")

Vacuum design of the Super-FRS at FAIR (in session "Thursday Poster Session")

Vacuum system for Wuhan Advanced Light Source storage ring (in session "Monday Poster Session")

Vacuum tube operation analysis under a positive grid biasing in J-PARC RCS (in session "Tuesday Poster Session")

Validation and countermeasures of vertical emittance growth due to crab cavity noise in a horizontal crab-crossing scheme (in session "Monday Poster Session")

Validation of control loop modeling for power limitation studies with beams for HL-LHC (in session "Tuesday Poster Session")

Verification of the optics model of the ESR-CRYRING transfer line at GSI (in session "Tuesday Poster Session")

Vertical bump orbit study on emittance of injection beam in transport line for the SuperKEKB main ring (in session "Monday Poster Session")

Vertical tests of the 166.6 MHz HOM-damped Prototype SRF Cavities for HEPS (in session "Wednesday Poster Session")

VHEE and ultra high dose rate radiotherapy studies in the CLEAR user facility (in session "Thursday Poster Session")

Virtual diagnostics for longitudinal phase space imaging (in session "Thursday Poster Session")

Virtual photon pulse characterisation using machine learning methods (in session "Thursday Poster Session")

Wakefield Acceleration in Structured Solids : E336 Experiment at FACET-II (in session "Tuesday Poster Session")

Wakefield and skin depth issues in the kicker at the SHINE (in session "Tuesday Poster Session")

Wakefield effects on dark current bunches for LESA (in session "Monday Poster Session")

Wakefield energy losses in the undulator section of the European XFEL (in session "Tuesday Poster Session")

Waveguide FEL oscillator simulation with toroidal mirror (in session "Tuesday Poster Session")

What is needed for BISCO to work in a dipole insert for 20 tesla hybrid accelerator magnets (in session "Wednesday Poster Session")

Withdrawn; see below. (in session "Monday Poster Session")

Work function measurement by means of photoelectron yield spectroscopy using a tunable pulsed laser to investigate short lifetime of the CeB6 thermionic cathode at SACLA (in session "Tuesday Poster Session")

X-band activities at INFN-LNF (in session "MC07.1 - Accelerator Technology and Sustainability (Contributed)")

X-band electron linear accelerator design for intraoperative radiotherapy (in session "Monday Poster Session")

XH Detector integration with LImA (in session "Thursday Poster Session")

Xopt: A simplified framework for optimization of accelerator problems using advanced algorithms (in session "Thursday Poster Session")

XRR Analysis of Al2O3 coated and mid-T heat treated niobium for future implementation in SIS-based SRF cavities (in session "Wednesday Poster Session")

Preliminary commissioning results for the plasma-driven attosecond X-ray source (PAX) experiment at FACET-II (in session "Tuesday Poster Session")

Choose timezone

IPAC'23 - 14th International Particle Accelerator Conference

IPAC'23