Speaker
Description
The superconducting Darmstadt electron linear accelerator S-DALINAC is a thrice-recirculating accelerator operating cw at a frequency of 3 GHz [1]. It can also run as a multi-turn energy recovery linac [2]. To improve the beam quality, the normal-conducting injector has recently been reconfigured. The chopper cavity was moved close to the thermionic gun. This reduces the position jitter downstream of the gun. The phase-space ellipse cut out on the chopper aperture is now significantly more stable. The new layout also frees space in the beamline after the chopper for radio-frequency diagnostic elements, which require an already bunched beam, and for an upcoming double-chopper system. Beam perturbations stemming from the thermionic gun can thus be corrected early.
A new intensity and phase monitor has already been commissioned. Building on this, a combined phase, intensity and position monitor will be developed and installed behind the chopper cavity. Its position readout will drive a feedback system utilizing two steerer dipole magnets upstream of the monitor. This system suppresses the transverse perturbations of the beam and improves the beam quality throughout the whole accelerator. These developments lay the groundwork for new beam diagnostics, including upcoming 6-GHz monitors in the recirculating beamlines, which are needed to distinguish two different bunch trains in a common beamline, simultaneously, that are off-set by a 180-degree phase shift.
Funding Agency
This work is supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project-ID 499256822 – GRK 2891 ‘Nuclear Photonics’
Footnotes
[1] N. Pietralla, Nucl. Phys. News, Vol. 28, No. 2, 4 (2018)
[2] F. Schliessmann et al., Nat. Phys. 19, 597-602 (2023)
| I have read and accept the Privacy Policy Statement | Yes |
|---|